STIHL 028 WB Specs: Engine, Weight, Bar Length & Performance Guide
The Stihl 028 WB is one of those older chainsaws that refuses to fade away. Built during the 1980s and early 1990s, this mid-size Wood Boss model earned a reputation for simple two-stroke power, rugged construction, and easy serviceability. If you own one, are rebuilding one, or are shopping for a used example, understanding the Stihl 028 WB specs is the fastest way to judge condition, order parts, and set it up for reliable cutting.
Exact Stihl 028 WB specifications can vary slightly by production year, market, and previous owner modifications. The numbers below represent the commonly documented factory ratings for the 028 WB and related 028 series saws. Always cross-check your saw’s serial number, model plate, and service manual before buying critical components like pistons, carbs, or ignition modules.
Stihl 028 WB Engine and Power Specifications
The heart of the 028 WB is an air-cooled, single-cylinder two-stroke engine. It sits in the 47 cc class, which made it a versatile firewood, fence-row, and light felling saw when it was new. Unlike modern high-strung professional saws, the 028 WB was designed to deliver usable torque across a broad rpm range, so it feels comfortable with a sharp chain and a 16- to 20-inch bar.
Factory power ratings for the Stihl 028 WB are usually listed between 2.2 kW and 2.4 kW, or roughly 3.0 to 3.2 horsepower. Some manuals and regional brochures quote slightly different figures because of exhaust, carburetor, and ignition changes over the model run. Even so, the engine’s personality remains consistent: strong low-end pull, moderate vibration, and a distinct older two-stroke exhaust note.
- Engine type: Single-cylinder, air-cooled, two-stroke
- Displacement: 47.0 cc (2.87 cu in)
- Bore x stroke: 42 mm x 34 mm
- Power output: Approximately 2.2–2.4 kW (3.0–3.2 hp)
- Idle speed: Around 2,800 rpm
- Fuel capacity: About 0.5 L (16.9 fl oz)
- Bar oil capacity: About 0.3 L (10.1 fl oz)
- Fuel mix: 50:1 with quality Stihl two-stroke oil
Displacement, Bore, and Stroke
The Stihl 028 WB uses a 47.0 cc displacement with a 42 mm bore and a 34 mm stroke. That oversquare bore-to-stroke ratio helps the engine rev cleanly while still producing enough torque for bucking firewood. It is one of the reasons the 028 WB feels stronger than its displacement might suggest when the chain is sharp and the carburetor is tuned correctly.
When rebuilding or replacing top-end parts, confirm whether your saw is a standard 028 WB or a later 028 variant. Some 028 series models share visual cues but use different cylinders, pistons, or crankshafts. Measuring the bore and checking the model stamp on the crankcase is more reliable than assuming every 028 part will interchange.
Horsepower, RPM, and Torque Ratings
Horsepower for the 028 WB is typically quoted at 3.0 to 3.2 hp, depending on the source and the saw’s state of tune. Maximum engine speed is generally in the 9,000 to 10,000 rpm range, while the chain is designed to cut best when the engine is loaded and pulling steadily rather than screaming at no-load rpm. A dull chain or lean carburetor will quickly expose the limits of any old two-stroke.
Torque is the 028 WB’s real strength. It pulls a .325-pitch chain through hardwood without demanding constant revving. To keep that power reliable, use fresh 50:1 fuel mix, a clean air filter, and the correct spark plug. Many saws use a Bosch WSR6F or NGK BPMR7A plug with a gap around 0.5 mm (0.020 in), though you should verify the exact plug for your ignition system.
Stihl 028 WB Physical Specs and Cutting Equipment
Physical specs matter just as much as engine output, especially if you plan to run the saw for hours. The 028 WB is a metal-bodied classic, so it feels heavier and more solid than many modern homeowner saws. Its powerhead weight is commonly listed near 5.4 kg (11.9 lb), but once you add a bar, chain, fuel, and bar oil, the complete saw can easily approach 15 to 17 pounds.
For cutting equipment, the 028 WB typically uses a .325-inch pitch chain with a .063-inch gauge. Common bar lengths range from 16 to 20 inches, with 18 inches being a practical sweet spot for firewood and general cleanup. The automatic oiler, adjustable chain tensioner, and chain brake system vary slightly by vintage, so inspect the hardware before ordering replacements.
Weight, Handles, and Anti-Vibration Features
The 028 WB’s weight gives it a planted, stable feel when felling or bucking, but it can be tiring for extended overhead limbing. The rear handle and top handle are designed for a secure grip, and many examples include anti-vibration mounts that isolate the handles from engine vibration. Worn rubber mounts, cracked handle assemblies, or missing AV buffers can make the saw feel much harsher than it should.
The “WB” designation is often associated with the Wood Boss name, and most 028 WB saws came with a chain brake as standard equipment in their later production years. Early or regional models may differ, so do not assume every 028 WB has the same safety features. If you are buying used, check that the brake band, hand guard, and throttle lock work properly before trusting the saw in the woods.
Guide Bar, Chain, and Sprocket Specs
For a typical Stihl 028 WB, a 16-inch bar with .325 pitch and .063 gauge uses 67 drive links. An 18-inch bar generally uses 74 drive links, and a 20-inch bar commonly uses 81 drive links. These counts can vary with bar brand and sprocket size, so always match the chain to the exact bar stamped length and drive-link count rather than guessing.
The sprocket is usually a 7-tooth .325 rim or spur sprocket, and the bar oiler is automatic with an adjustable flow on many models. A clogged oil passage, worn sprocket, or incorrectly gauged chain will ruin a good bar quickly. Keep the chain sharp, tensioned correctly, and lubricated, and the 028 WB will still cut cleanly through firewood, storm damage, and small felling jobs.
If you are restoring or running a Stihl 028 WB, treat the specs above as a baseline rather than an absolute rulebook. Production changes, aftermarket parts, and decades of use mean every saw has its own story. Check your specific model, use the right fuel mix, keep the chain sharp, and tune the carburetor carefully. With a little attention, this old Wood Boss can remain a dependable cutting tool for years of firewood seasons ahead.