stihl 031av specs

Stihl 031AV Specs: Power, Weight, Bar Length & Complete Vintage Chainsaw Guide

By Steven Taylor
AD

If you own, restore, or are considering buying a vintage Stihl 031AV, knowing the Stihl 031AV specs is the fastest way to judge whether the saw still fits your needs. The 031AV belongs to Stihl’s 030 series, a line of magnesium-case chainsaws that earned a reputation for torque, durability, and simple field service during the 1970s and early 1980s.

Unlike modern computer-tuned saws, the 031AV is mechanical, rebuildable, and easy to understand once you know its core numbers. Its published specs—roughly 48.7 cc, about 2.5 to 2.7 horsepower, and a 14- to 20-inch bar range—tell only part of the story. The real value is in how those figures affect cutting speed, fuel mix, bar selection, vibration, and long-term parts availability.

Stihl 031AV Engine and Performance Specs

At the heart of the Stihl 031AV is a two-stroke single-cylinder engine with a cast magnesium crankcase and a reputation for low-end pulling power. It was never designed to scream like a modern racing saw; instead, it was built to lug a moderate bar through firewood, limbing, and light felling with steady torque.

AD
STIHL 031 AV Chainsaw Specs and Review
STIHL 031 AV Chainsaw Specs and Review
🪵 STIHL 041 Chainsaw Review: The Vintage Torque Monster
🪵 STIHL 041 Chainsaw Review: The Vintage Torque Monster
the generations of stihl chart is shown in black and white, as well as numbers
the generations of stihl chart is shown in black and white, as well as numbers

Factory ratings and aftermarket references vary slightly by year and market, so you will see horsepower quoted from about 2.5 hp to 2.7 hp. The saw’s real-world performance depends just as much on compression, carburetor condition, ignition timing, and chain sharpness as it does on the original engine rating.

Displacement, Bore, and Stroke

The Stihl 031AV is commonly listed at 48.7 cc, or about 2.97 cubic inches. Service data often cites a 44 mm bore and a 32 mm stroke, a square-ish bore-to-stroke ratio that helps explain the saw’s strong midrange torque instead of high-rpm peak power.

Model Profile: 031 AV
Model Profile: 031 AV
an instruction manual for the stih ms 27i, 29i and 29i chainsaws
an instruction manual for the stih ms 27i, 29i and 29i chainsaws
5 Most Common STIHL MS 291 Problems and Best Solution
5 Most Common STIHL MS 291 Problems and Best Solution

That displacement places the 031AV in the same general class as many modern 50 cc farm and ranch saws, but the comparison stops at the numbers. The 031AV’s porting, ignition, and carburetion are period-correct, so it feels slower to rev and happier when the operator lets the chain feed at its own pace.

Horsepower, RPM, and Torque Characteristics

Most published Stihl 031AV specs list output around 2.5 to 2.7 hp, equivalent to roughly 1.9 to 2.0 kW. Maximum power is typically delivered at a relatively low rpm by modern standards, often cited around 7,000 rpm, with a broad torque curve that makes the saw forgiving in hardwood and dirty cutting conditions.

AD

The 031AV is not a high-revving limbing saw. It prefers a sharp chain, a properly tuned Tillotson HS-series carburetor, and an 18-inch bar rather than a long bar buried in green oak. When set up correctly, it pulls steadily and avoids the peaky behavior that can make smaller vintage saws frustrating.

an instruction manual for the stihl o10, 011 speed chainsaw
an instruction manual for the stihl o10, 011 speed chainsaw
Before & After: Stihl 051 AV Transformation
Before & After: Stihl 051 AV Transformation
an advertisement for the stih tool company, with instructions on how to use it
an advertisement for the stih tool company, with instructions on how to use it
What does AV mean on STIHL Chainsaws?
What does AV mean on STIHL Chainsaws?
STIHL 045 AV and AVE Specs, Reviews, and Vintage Ads
STIHL 045 AV and AVE Specs, Reviews, and Vintage Ads
A Look Back at the STIHL Electronic AV 69 Chainsaw
A Look Back at the STIHL Electronic AV 69 Chainsaw

Stihl 031AV Dimensions, Fuel, and Bar Specs

Physical specs matter as much as engine output on a vintage chainsaw. The 031AV has a solid, old-school feel, and its weight, fuel capacity, and oil tank size determine how long you can cut before refueling and how much fatigue you will feel after a long session.

Bar and chain compatibility is another critical part of the Stihl 031AV spec sheet. Because these saws are old enough to have been modified over the decades, you should always verify the sprocket, bar mount, and chain gauge before ordering replacement cutting gear.

AD

Weight, Bar Length, and Chain Setup

The powerhead weight of a Stihl 031AV is commonly listed around 6.6 kg, or 14.5 pounds, without the bar and chain. Add an 18-inch bar, chain, and full tanks of fuel and oil, and the saw quickly becomes a substantial tool that rewards good footing and proper cutting technique.

an orange book cover with a man in the woods working on a fallen tree and text that reads still 20 big
an orange book cover with a man in the woods working on a fallen tree and text that reads still 20 big
STIHL MS 280 Chainsaw with Intelligent Engine Management System
STIHL MS 280 Chainsaw with Intelligent Engine Management System
The Rare STIHL 020 AV Chainsaw Versions That Sell For $$$
The Rare STIHL 020 AV Chainsaw Versions That Sell For $$$
10 WORST Stihl Chainsaws Ever Made: As Determined By Stihl Chainsaw Fans
10 WORST Stihl Chainsaws Ever Made: As Determined By Stihl Chainsaw Fans

Recommended bar lengths generally range from 16 to 20 inches, with 16- and 18-inch bars being the sweet spot for most firewood work. A common chain setup is 3/8-inch pitch, .050-inch gauge, with drive link counts around 60 links for a 16-inch bar, 66 links for 18 inches, and 72 links for 20 inches, depending on the bar profile.

Fuel Mix, Oil, and Maintenance Specs

Fuel mix is one of the most misunderstood Stihl 031AV specs. Original period recommendations often called for 40:1 gasoline-to-oil mixture, and many collectors still use that ratio for vintage engines. A high-quality modern synthetic two-stroke oil mixed at 50:1 can work well in a healthy saw, but 40:1 remains the safer baseline if the engine’s history is unknown.

AD

Other maintenance specs should be checked against a service manual for your exact production year. Common tune-up items include an NGK BPMR7A or Champion CJ8 spark plug gapped near 0.020 inch, a clean felt or mesh air filter, a fresh fuel filter, and an adjustable bar oil pump. Fuel capacity is often listed near 0.65 L and bar oil capacity near 0.30 L, so plan on refueling before the oil tank runs dry on long cutting days.

Keeping a vintage Stihl 031AV in service is less about chasing modern saw speeds and more about respecting a proven design. If you are tuning, repairing, or buying one, let the specs guide your expectations: check compression, inspect the AV mounts, confirm the ignition type, and match the bar and chain to the work you actually do. A well-sorted 031AV with a sharp 18-inch chain and a clean carburetor can still earn its place in the woodpile, and the right parts and fuel mix will keep it cutting for years to come.

AD