Poulan Pro PR5020 Replacement Chain: Top Picks, Sizes & Buying Guide
The Poulan Pro PR5020 is a genuine workhorse of a farm and ranch saw. With a 50cc engine and a 20-inch bar, it has enough grunt to buck firewood all afternoon, clear storm damage, and limb fallen trees without asking for much in return. But every one of those jobs depends on a single consumable part: the cutting chain. The moment that chain goes dull, stretches past the adjuster, or throws a tie strap, the saw becomes a very loud paperweight.
That is why choosing the right Poulan Pro PR5020 replacement chain matters more than most owners realize. Walk down the chainsaw aisle at a hardware store, or scroll through a few online listings, and you will see dozens of chains that look nearly identical in the package. They are not interchangeable. Pitch, gauge, drive link count, and cutter profile all have to line up with your bar and sprocket, or the chain will sit crooked, oil poorly, and potentially jump the bar at full throttle. This guide covers the exact specifications that fit the PR5020, the brands worth buying, and the habits that keep a new chain cutting like new for far longer.
Poulan Pro PR5020 Replacement Chain Specifications
The PR5020 ships from the factory with a 20-inch bar and a matching 3/8-inch low-profile chain running a .050-inch gauge. If you remember nothing else from this article, remember those three numbers, because they are the foundation of every buying decision you will make. Get them wrong and no amount of sharpening skill will save the cut.
Poulan built this saw to accept a standard configuration that is shared by a huge number of 45cc to 55cc homeowner and farm saws, which is good news. It means replacement chains are widely available, competitively priced, and stocked by nearly every retailer that sells outdoor power equipment. You are not locked into a proprietary chain, and you are not forced to pay dealership prices for a basic wear item.
Pitch, Gauge, and Drive Link Count Explained
Pitch is the distance between any three rivets on the chain, divided by two, and it determines how the chain meshes with the drive sprocket. The PR5020 uses 3/8-inch low-profile pitch, often written as 3/8 LP or 3/8 Picco. This is not the same as full-size 3/8-inch pitch used on larger professional saws. A standard 3/8 chain will not fit the PR5020's sprocket, even though both are labeled 3/8.
Gauge is the thickness of the drive link tangs where they ride inside the bar groove, and it must match the bar. The PR5020 uses .050-inch gauge. Drive link count is simply how many drive links the loop contains, and for a 20-inch bar on this saw, that number is 70. If you buy a 70-link, 3/8 LP, .050 chain, it will fit. Any deviation in those numbers means a return trip.
| Specification | Value for Poulan Pro PR5020 |
|---|---|
| Bar length | 20 inches |
| Pitch | 3/8 inch low profile |
| Gauge | .050 inch |
| Drive links | 70 |
| File size for sharpening | 5/32 inch (4.0 mm) |
| Depth gauge setting | .025 inch |
How to Verify Fitment Before You Buy
The most reliable way to confirm fitment is to read the stamping on your existing bar. Nearly every bar manufactured in the last three decades has the pitch, gauge, and drive link count engraved near the tail, something like "20 .050 70DL" or "3/8 LP 70." That stamping is the manufacturer telling you exactly what belongs on the bar, and it takes precedence over any generic listing description you find online.
If the stamping is worn away, count the drive links on your old chain manually and measure the bar groove with a caliper or compare the tangs against a known .050 chain. You can also check your owner's manual, which lists the replacement chain part number in the specifications section. Buying from a retailer with a solid return policy is a smart hedge, but taking thirty seconds to verify saves you the trip entirely.
Best Replacement Chain Options for the PR5020
The aftermarket for 3/8 low-profile chain is deep and mature, which means you can choose between a budget loop that gets the job done and a premium loop that holds an edge noticeably longer. There is no single correct answer, because the right chain depends on how often you cut, what you cut, and how confident you are with a saw that kicks back.
What matters is that whatever you buy meets the 3/8 LP, .050, 70-link specification and uses quality steel. Bargain-bin chains with soft cutters need sharpening constantly, stretch faster, and are more likely to break at the rivets under load. Saving five dollars on a chain that lasts half as long is not a saving at all.
OEM Poulan Chains Versus Oregon Aftermarket Chains
Poulan's own replacement loop for the 20-inch PR5020 bar is a perfectly serviceable low-kickback chain, typically sold under a part number in the 952051338 family depending on the retail packaging. It is the safest choice if you want an exact factory match and you are buying from a Poulan dealer or a big-box store shelf.
For most owners, though, Oregon chain is the better value. The Oregon 91PX070 is a direct-fit replacement that meets the same 3/8 LP, .050 gauge, 70-link specification and is available almost everywhere. The Oregon 91VXL070 is a slightly more aggressive variant in the same footprint, offering faster cutting for users who are comfortable managing kickback. Husqvarna and Carlton also produce compatible 3/8 low-profile loops, and any of them will serve you well as long as the numbers match.
Low-Kickback Versus Full-Chisel Cutters
Low-kickback chain uses a bumper drive link or a ramped depth gauge to limit how aggressively the cutter can bite into wood at the nose of the bar. That design dramatically reduces the chance of a violent kickback, which is the single most common cause of serious chainsaw injuries. Every chain sold as original equipment on a consumer saw like the PR5020 is low-kickback, and that is not an accident.
Full-chisel or semi-chisel chains without bumpers cut faster and clear chips more efficiently, and experienced users often prefer them for bucking clean firewood. Semi-chisel is the practical middle ground: it holds an edge longer in dirty or frozen wood than full-chisel, and it sharpens more forgivingly with a round file. If you cut mostly clean logs and you are comfortable with saw handling, a semi-chisel loop in the correct size is a reasonable upgrade. If you are new to the saw, stick with low-kickback and let the safety features do their job.
Installing, Tensioning, and Maintaining Your New Chain
Installing a chain on the PR5020 takes about five minutes once you have done it a time or two, and it is a skill worth learning. Doing it yourself means you are never stuck waiting on a shop, and you will notice wear issues early because you are handling the bar and sprocket every time you swap a loop.
Maintenance is where chain life is really decided. A chain that is properly tensioned, well oiled, and sharpened at the first sign of dullness will outlast a neglected chain by a wide margin. The steel is the same; the difference is entirely in how it is treated between cuts.
Mounting the Chain and Setting Tension
Start by engaging the chain brake and disconnecting the spark plug boot so the saw cannot start while your hands are near the sprocket. Remove the bar nut or nuts and the clutch cover, then slip the chain over the drive sprocket with the cutters facing forward on the top of the bar. Seat the drive links into the bar groove and slide the bar back so the chain has slack, then reinstall the cover and thread the nuts finger-tight.
Adjust tension using the side tensioning screw or the tool-less tensioner knob until the chain sits snug against the underside of the bar. Lift the chain at the middle of the bar; you should be able to pull it just far enough that two or three drive links clear the groove, roughly an eighth of an inch. Tighten the bar nuts firmly, then spin the chain by hand to confirm it moves freely. A new chain will stretch during its first few cuts, so check tension after the first thirty minutes of use and again after the first tank of fuel.
Sharpening, Lubrication, and Knowing When to Replace
Sharpen with a 5/32-inch round file at the angle stamped on the cutter, usually 30 degrees, and file every cutter the same number of strokes to keep the chain cutting straight. Check and lower your depth gauges to .025-inch periodically, because a chain with sharp cutters and high depth gauges will still refuse to feed into the wood. A file guide makes this job nearly foolproof for occasional users.
Keep the oil tank full with dedicated bar and chain oil, and clean the bar groove and oil holes every time you swap chains, since packed sawdust starves the bar of lubrication and leads to burned rails. Replace the chain when the cutters have been sharpened down to the witness marks, when rivets feel loose, or when a tie strap has cracked. Replacing the drive sprocket every two or three chains is cheap insurance, since a worn sprocket will chew up a brand-new loop in short order.
Keeping a spare 70-link, 3/8 low-profile, .050-gauge chain on the shelf means a dull edge never ends your workday. Match the numbers to your bar, keep the loop tensioned and oiled, and the PR5020 will keep earning its place in your shed for years of firewood seasons to come.