Easy Lazy Susan Turntable Installation: Step-by-Step Guide
Transforming your kitchen or workspace with a lazy susan turntable is a surefire way to enhance both your storage capacity and accessibility. These ingenious devices are not only practical but also add a touch of style to any space. Here, we guide you through the process of installing a lazy susan turntable, ensuring an easy and efficient DIY experience.
Before you begin, gather your tools and materials. You'll need a measuring tape, screwdriver, drill, drill bit set, level, pencil, and the lazy susan turntable itself. Ensure you have all components of your turntable, including the base, shelf, and bearings.
Preparation and Measurement
Accuracy is key in any installation process. Start by measuring the space where you want to install your lazy susan. Ensure the dimensions align with your turntable's base size.



Consider the location carefully. For kitchen cabinets, it's best to install turntables in blind corners or base cabinets with tall or double doors where you want to maximize storage.
Marking the Installation Site
Once you've decided on the location, use a measuring tape and pencil to mark the center point on the cabinet's base or wall. This will guide you in placing the turntable's center hole.



Use a level to ensure your marks are perfectly horizontal, ensuring a smooth and stable rotation of the lazy susan after installation.
Drilling the Hole
Following your marked center point, use a drill bit that matches the diameter of your turntable's center post to drill a hole. Drill through the cabinet base or wall slowly and carefully, ensuring the hole is straight and smooth.
If your lazy susan comes with a template, follow the provided instructions to guide your drilling. Ensure you're drilling into a sturdy surface that can provide adequate support for the turntable.






Installing the Base Plate
Once the hole is drilled, it's time to install the base plate. This will serve as the turntable's foundational support.
Position the base plate against the underside of the cabinet or wall, aligning the hole with the one you've drilled. Ensure it's level and centered.
Securing the Base Plate
Use the appropriate screws or bolts provided with your lazy susan kit to secure the base plate. Caution should be exercised when drilling into the base plate to ensure proper alignment and plaît dependency.

Tighten the screws or bolts gradually and evenly to ensure the base plate is secured tightly without wobbling or misalignment. Use a level to double-check that the plate remains horizontal throughout the installation.
Testing the Base Plate
Gently tug at the base plate to ensure it's secure. There should be no movement or play, indicating a solid installation.
If the base plate was pre-drilled, skip this step and proceed to the next section. If not, countersink the screw or bolt heads for a clean finish and to prevent them from interfering with the turntable's rotation.
Attaching the Bearings and Shelf
With the base plate secure, you can now start assembling the lazy susan's moving parts. Begin by attaching the bearings to the base plate.
Bearings come in different designs, but the process typically involves aligning the bearing's shaft with the hole in the base plate before securing it in place with a setscrew or nut.
Assembling the Shelf
Once the bearings are in place, it's time to attach the shelf. This involves aligning the shelf's center post with the bearing's shaft and securing it with a setscrew or nut.
Ensure the shelf is square to the base plate and properly aligned. Test the rotation by gently turning the shelf. It should spin smoothly and freely without wobbling.
Securing the Shelf
Once you're satisfied with the shelf's rotation, secure it permanently to the bearing's shaft. This may involve tightening a setscrew or locking nut.
If your lazy susan comes with a cover plate to hide the mechanics and provide a finished look, attach this now according to the provided instructions.
Step back and admire your new lazy susan turntable. Its smooth rotation and easy access will revolutionize your storage. Don't forget to maintain your turntable regularly by keeping it clean and lubricating the bearings as needed for continued smooth operation.





