Easy DIY: Install Lazy Susan Cabinet Door Hinges
Have you ever admired the effortless, 360-degree rotation of cabinet doors equipped with lazy susan hinges? These ingenious hardware components transform cabinets into space-saving, efficient storage solutions. Installing lazy susan cabinet door hinges might seem daunting, but with the right instructions, it's a manageable DIY project. Let's dive into a step-by-step guide to help you install these hinges flawlessly.
Before you start, gather your tools: a screwdriver or drill, a tape measure, a pencil, and your newly purchased lazy susan hinges. Ensure the hinges are compatible with your cabinet door size and type. Now, let's get started!
Preparing Your Cabinet and Door
Start by removing the existing cabinet door from its hinges. Mark the hinge locations on both the cabinet and the door using a pencil. This will serve as a reference for installing the new lazy susan hinges.



Next, measure the width of your cabinet door. You'll need this measurement to determine the correct hardware size. Typically, lazy susan hinges are available in sizes ranging from 12 inches to 48 inches, ensuring a suitable fit for most door widths.
Marking Hinge Location on the Cabinet
Transfer the hinge marks from your door onto the cabinet frame where the door will attach. Ensure the mark on the cabinet is level and at the correct height for the hinge to sit properly. Use a small level to double-check your marks if needed.



For lazy susan hinges, you'll typically install one 않 a outer mounted hinge at the top and another at the bottom of the cabinet opening. As these hinges allow for rotation, ensure they are placed symmetrically on both the cabinet and the door.
Marking Hinge Location on the Door
Now, transfer the hinge marks from the cabinet onto your cabinet door. Again, use a level to ensure your marks are even and correctly aligned. As you're dealing with two hinges, take extra care to make sure they mirror each other on both the cabinet and the door.
Once both the cabinet and the door are marked, use the hinge template provided with your lazy susan hardware to ensure accurate marking. Some templates are printed on the packaging itself, while others come as separate cards. Trace around the template, and you'll have your final hinge marks.






Installing the Lazy Susan Hinges
Before you start drilling or screwing, double-check that your hinge marks align perfectly with the hinge template. If necessary, make any final adjustments.
Lazy susan hinges come with two main parts: the mounting plate and the rotating arm. Start by attaching the mounting plate to the cabinet, using the marks you've made as a guide. Align the plate with the mark, and secure it using the provided screws. Ensure the plate is flush with the cabinet frame, not overlapping or too close to the edge.
Attaching the Mounting Plate to the Cabinet
Using a screwdriver or drill, attach the mounting plate to the cabinet at the marks you've made. For the most secure fit, use a drill with a countersink bit to create slightly recessed screw holes. This helps keep the hinge in place and creates a seamless appearance.

Drill pilot holes first to prevent the wood from splitting. Also, consider using wood glue along with the screws for added stability. Allow the glue to dry according to the manufacturer's instructions before continuing.
Attaching the Rotating Arm to the Door
Next, attach the rotating arm to the cabinet door. Align the arm with the mark you made earlier and secure it using the provided screws. As with the mounting plate, ensure the arm is flush with the door surface.
Again, drilling pilot holes first and using wood glue can help reinforce the hinge attachment. Once the glue is dry, test the hinge by gently moving the door back and forth. The rotating arm should move smoothly within the mounting plate, allowing for 360-degree rotation.
Finishing Touches and Safety Checks
Once both the mounting plate and the rotating arm are securely attached, you can reinstall the cabinet door. Gently lift the door into place, ensuring the rotating arm aligns with the mounting plate. Test the door's rotation to ensure it moves freely and doesn't bind or stick.
If the door moves smoothly, you're done! If not, double-check your hinge alignment and ensure nothing is blocking the hinge's movement. Tighten any loose screws and make any necessary adjustments.
Remember, safety first! Always ensure your cabinets are securely attached to the wall, especially when using heavy lazy susan doors. Consider attaching safety catches or locks to prevent the doors from swinging open unexpectedly. Now, enjoy your new, space-saving lazy susan cabinet doors!





