How to Replace Hardwired Puck Lights: A Step-by-Step Guide
Have you found yourself in a situation where you've moved into a new home or office and the lighting just isn't to your liking? Perhaps you've decided to give your space a complete makeover and the existing hardwired puck lights are no longer fitting your style. Replacing hardwired puck lights might seem like a daunting task, but with the right guidance, it can be accomplished safely and effectively.
Before we dive into the process, it's essential to understand what you're working with. Puck lights are typically installed in ceilings and often used as task or accent lighting. They're hardwired, which means they're directly connected to your home's electrical system. This complexity might make you consider hiring a professional, but with the right tools and some careful planning, many homeowners can tackle this project themselves.
Assessing Your Puck Lights and Electrical System
Before you begin any work, it's crucial to understand your current lighting setup. Turn off the power to the lights at your home's main electrical panel and use a non-contact voltage tester to ensure the power is off.



The first step is identifying the type of bulb your puck lights use. Most puck lights use GU10 or MR16 bulbs, which have different bases. You'll need to know this to ensure you purchase the correct replacement lights.
GatheringYour Tools
Once you've assessed your lights and electrical system, gather the necessary tools for the job. You'll need a screwdriver (usually a Phillips head), a ladder, safety glasses, work gloves, and wire connectors. If you're replacing the entire fixture, you'll also need your new puck lights.



Ensure the area you'll be working in is clear of any debris and well-lit to prevent accidents.
Safety First: Understanding Your Circuit
Before you start any electrical work, it's crucial to understand your home's wiring. Use a circuit mapper or multimeter to identify the circuit your puck lights are on. This will help you avoid accidentally turning off power to other parts of your home.
Label your lights' wires (you might have black and white, or black, red, and white) to ensure you're connecting them correctly when you reinstall the lights.






Removing the Old Puck Lights
With your safety checks complete, it's time to remove the old puck lights. Use your screwdriver to remove the trim around the lights. Usually, this is held in place with clips or screws. Once the trim is removed, you should be able to see the light housing.
Carefully remove the light housing by unscrewing it or pushing it upwards if it's a friction-fit. Once the housing is removed, you should see the wiring. Loosen the screws holding the wires in place and gently pull the wires out of the electrical box.
Preparing for the New Puck Lights
Before installing your new puck lights, ensure they're the correct type and size for your electrical box. Most puck lights are 6-8 inches in diameter, but it's always good to double-check.

If your replacement lights are a different size, you might need to adapt your electrical box. You can do this by adding an extension ring to the box or mounting the lights on a junction box.
Wiring the New Puck Lights
With your new lights ready, it's time to wire them. Connect the black wires (hot) together and the white wires (neutral) together. If your wires are different sizes, use wire connectors to connect them. Use clockwise twisting to avoid wire twisting.
Once your wires are connected, wrap the connections in electrical tape and push the wires back into the electrical box. Ensure there's no strain on the wires and that they're not visible when you reinstall the light housing.
Installing the New Puck Lights
With your new lights wired, it's time to install them. Line up the light housing with the electrical box and gently push it into place. Secure it with screws if necessary.
Reinstall the trim around the light, ensuring it's securely fastened to the ceiling.
Testing the New Puck Lights
Before you turn the power back on, use your non-contact voltage tester to ensure there's no power at the light fixture. Once you're sure it's safe, turn the power back on at your home's main electrical panel.
Test your new puck lights to ensure they're working correctly.
Congratulations! You've successfully replaced your hardwired puck lights. You've not only saved money by doing it yourself, but you've also gained a new skill. Always remember, if any part of the process feels unsafe or complex, don't hesitate to consult a professional. Keep your space well-lit and enjoy the new ambiance your replacement lights bring!


