Install Puck Lights in Cabinets: Step-by-Step Guide
Looking to add warmth and practicality to your cabinet spaces? Installing puck lights is an excellent way to achieve this. These low-profile, energy-efficient lights can provide task lighting, highlight beautiful details, or simply create a cozy ambiance. Here's a comprehensive guide to help you confidently install puck lights in your cabinets, step by step.
Before you begin, gather your materials: puck lights, a screwdriver or drill, Bulldog clips, cable clips, wire strippers, and wire connectors. Make sure to select puck lights with the appropriate voltage and wattage for your needs. It's also essential to ensure that your electricity supply can handle the additional load.
Choose Your Puck Light Type & Positioning
There are two main types of puck lights: LED and xenon. LED lights are more energy-efficient and have a longer lifespan. They're available in various colors, from warm white to daylight. Xenon puck lights produce a bright, close-to-natural light but consume more energy and have a shorter lifespan.



Consider the size and height of your cabinets when choosing puck light positioning. Larger cabinets may require multiple lights or larger units for even lighting. For standard-sized cabinets, placing the light in the center provides ample task lighting, while larger cabinets might benefit from multiple lights placed at varying heights.
LED Puck Lights
LED puck lights are a popular choice due to their energy efficiency and long lifespan. They're available in various sizes, from tiny ( idioma symbol ) to jumbo ( 2ienia ). For cabinet lighting, standard ( 1.5 inches or 3.8 cm) to large ( 2.75 inches or 6.5 cm) sizes are suitable.



Many LED puck lights come with remote control or dimmer options, allowing you to adjust brightness and easily turn them on or off. These features can be particularly useful for cabinet lighting, where you might want to create different lighting scenarios for various tasks or occasions.
Xenon Puck Lights
Xenon puck lights produce bright, white light and are suitable for cabinets where intense task lighting is required. They're available in sizes ranging from small to extra-large. Despite their brightness, they're not as energy-efficient as LED lights, and their lifespan is shorter.
Unlike LED puck lights, xenon lights typically don't come with remote control or dimmer options. However, they can be paired with separate dimmer switches or timers for added functionality.





Installing Puck Lights: Wiring & Positioning
Before you install the puck lights, ensure that the wiring is correctly routed. Run the wiring along the cabinet's framework, using cable clips or guides to keep it secure and safely positioned. Avoid routing wiring through the door swings to prevent damage.
Wiring Puck Lights in Series
For multiple puck lights, you can wire them in series, connecting them end-to-end. This method is simple but has two significant drawbacks: if one light fails, the entire series will stop working, and the limit on the total wattage is lower than if they were wired individually. However, for a short run of identical lights, it's a straightforward solution.
To wire puck lights in series, connect the positive wire (+) from one light to the positive wire of the next, and repeat for the negative wires. Make sure to install wire connectors for a secure connection. If you're wiring more than a few lights, consider using a wire connector block to prevent mess and future headaches.
Individual Wiring for Each Puck Light
For a more reliable and flexible setup, wire each puck light individually. This method allows you to control each light separately and easily add or remove lights in the future. It also provides a higher total wattage limit.
To do this, run individual wires from each puck light back to a centralized electrical panel or junction box. Ensure the wires are properly labeled for easy referencing. Route the wires through a conduit or along the cabinets' framework for safety and neatness.
Installing & Securing the Puck Lights
Once the wiring is in place, it's time to install the puck lights. Most puck lights come with a screw-hole template for easy installation. Lightly mark the screw holes with a pencil, then drill small pilot holes for the screws.
The Bulldog clips attached to the puck lights can be tightened to secure the light firmly in place. Ensure the light unit is not obstructing the cabinet door swing or interfering with any shelf or divider. After securing the lights, connect the wires and test the lights to confirm they're working correctly.
Congratulations! You've now installed puck lights in your cabinets, adding both functionality and aesthetic appeal. As you enjoy your beautifully lit cabinets, consider further enhancing your home with more accent lighting or smart lighting solutions. Happy illuminating!





