How to Replace a Bathtub Drain Assembly
Imagine this: You're relaxing in your bathtub after a long day, but suddenly, water starts gurgling in the drain instead of disappearing. It's time to confront that dreaded clog or replace your old bathtub drain assembly. Don't worry, it's an easy fix with the right guidance.
Replacing a bathtub drain assembly can save you from costly plumber visits and is a project anyone with basic DIY skills can handle. Let's dive in and explore the step-by-step process, from gathering tools and understanding drain types to completing the installation.
Understanding Bathtub Drain Assemblies
First, you need to understand the two main types of bathtub drain assemblies:



- Pop-up Drain Assemblies: These have a lever or knob that controls a plug, which rests on the tub's bottom. They're common in newer homes.
- App herr Drain Assemblies: These use a metal rod to hold the plug in place. They're often found in older homes and can be a bit more complex to replace.
Get familiar with your drain assembly type. Here, we'll guide you through replacing a pop-up drain assembly, as it's simpler and more common.
Gather Your Tools
Before you start, gather these essential tools:



- Adjustable wrench
- Plumber's putty
- Large channels locks
- New drain assembly
If you're dealing with an appareil drain assembly, you'll also need a hacksaw or sawzall to cut the metal rod.
Remove the Old Drain
Start by turning off the water supply and opening the faucet to relieve any water pressure. Then, follow these steps to remove the old drain assembly:
- Slide the overflow plate out of its slot. If it's stuck, use a flathead screwdriver to gently pry it out.
- Remove the drain cover and lift the pop-up mechanism out of the tub. You might need to use pliers to twist and pull the pivot rod.
- Unscrew the lock nut using an adjustable wrench and remove the escutcheon (the metal ring around the drain).
- From below the tub, use a wrench to unscrew the coupling nut that holds the drain tailpiece to the trap.
- Once the tailpiece is loose, remove it along with the old drain assembly from above.
Install the New Drain Assembly
Now that you've removed the old assembly, it's time to install the new one. Here's how:






Prime the New Drain
Before installation, apply a small amount of plumber's putty around the base of the strainer, about half an inch from the bottom.
Install the New Drain Assembly
Now, follow these steps to install the new drain assembly:
- From below the tub, position the tailpiece through the tub opening and attach it to the trap using the coupling nut. Tighten securely.
- From above the tub, slide the strainer into place, ensuring the putty creates a tight seal.
- Secure the strainer with the lock nut, using an adjustable wrench. Be careful not to overtighten.
- Reinstall the escutcheon.
- Replace the pop-up mechanism, ensuring it fits correctly and operates smoothly.
- With the overflow plate, cover the hole where the pop-up rod emerges.
Finally, turn your water supply back on and check for any leaks. You're all done!

There you have it! Replacing a bathtub drain assembly is easier than you thought. By following these steps, you'll have your bathtub back in working order in no time, ready for your next relaxing soak.




