Upgrade Old Bathtub: Step-by-Step Guide to Install New One
The bathroom is a sanctuary, a place where we start our days and unwind after long ones. But an old, worn-out bathtub can detract from this otherwise soothing atmosphere. Replacing an old bathtub with a new one can breathe new life into your bathroom, adding both style and functionality. Here's a comprehensive guide on how to transition seamlessly from old to new.
Before we dive into the step-by-step process, let's first understand what's involved in replacing a bathtub. This guide assumes you're replacing a standard bathtub, not a custom or whirlpool model. If your current bathtub is surrounded by drywall, the replacement process is straightforward. However, if it's surrounded by tile, the process becomes more complex, and you might want to consider hiring a professional.
Planning and Preparation
The first step in any project is planning. Measure your current bathtub to ensure the new one will fit. Consider the style and material you want – ranging from acrylic and fiberglass to cast iron and porcelain. Also, decide whether you want a similar bathtub or perhaps to upgrade to a soaking tub or shower-tub combo.



Once you've decided on the specifics, it's time to prepare for the replacement. Gather your tools – you'll likely need a pry bar, utility knife, adjustable wrench, screwdriver, spackling compound, sandpaper, and possibly a hole saw. You'll also need your new bathtub, of course, along with any necessary accessories like drain and faucet kits.
Dismantling the Old Bathtub
Start by turning off the water supply and valve. Open the faucet to relieve pressure. Then, remove the faucet and overflow plate. Unscrew and remove the drain assembly, which may require an adjustable wrench. Once these are off, you can carefully pry the tub away from the walls and remove it.



If your old bathtub is surrounded by ceramic tile, you might need to use a score-and-snap tool to cut the tile, or hire a professional to avoid damaging the tile.
Preparing the Area
Inspect the area where the old bathtub was. If there's any damage, repair it now. Clean up any debris and ensure the area is level. If not, use shims beneath the new tub to ensure it sits level and stable.
Check the water supply and drain lines to ensure they're in good working order. If necessary, replace them with new ones that match the new bathtub's configuration.






Installing the New Bathtub
With the area prepared, it's time to install the new bathtub. Start by positioning the tub, ensuring it's level. Then, connect the water supply lines to the faucet tailpiece. Reinstall the drain assembly and connect it to the drain pipe. Ensure the drain pipe is securely connected and that the tub's drain hole is perfectly aligned with the drain pipe.
Reattach the faucet and overflow plate, then apply plumber's putty around the drain and faucet bases to create a watertight seal. Ensure all connections are tight, then turn on the water supply and test the tub.
Finishing Touches
Once the tub is installed and tested, it's time to prepare the area for tiling, if necessary. If your new tub is surrounded by drywall, you can move on to the next step. If it's surrounded by tile, you'll need to install or repair the tile before proceeding.

Once the tiling is complete, clean the area, and apply a fresh coat of sealant to the tub to protect it from water damage. Finally, polish the area to make it shine and ready for use.
Replacing an old bathtub with a new one can seem daunting, but with careful planning and execution, it's a task that many homeowners can tackle themselves. Enjoy the satisfaction of having transformed your bathroom into a more comfortable, stylish retreat.





