how to remove jeep gladiator bed cover

How to Remove Jeep Gladiator Bed Cover

By David Moore
AD

A well-maintained Jeep Gladiator can handle rough terrains and daily commutes with ease, but the 5-foot bed can sometimes require a little extra care, like removing the bed cover. This straightforward guide will help you understand the process, ensuring your Gladiator's versatility and longevity.

Removing the Jeep Gladiator bed cover might seem daunting at first, but with the right steps and a little patience, it's a manageable task that opens up a world of customization options for your Gluadiator.

Preparing for Removal: Tools and Safety

Before diving into the process, gather these essential tools: a torch, a flathead screwdriver, and ratchet and sockets (10mm, 13mm, and 14mm). Ensure you're working in a safe, well-lit environment. Disconnect the negative battery terminal to prevent any electrical shorts.

AD
Best Truck Bed Tonneau Covers for Jeep Gladiator | Top Picks 2025
Best Truck Bed Tonneau Covers for Jeep Gladiator | Top Picks 2025
DiamondBack SE & HD Bed Covers Install & Review for Jeep Gladiator
DiamondBack SE & HD Bed Covers Install & Review for Jeep Gladiator
Rear seat delete with foam floor for dogs - cheap, easy and it works great
Rear seat delete with foam floor for dogs - cheap, easy and it works great

Safety should always be your top priority. Wear appropriate clothing and gloves to protect your hands. Also, make sure the engine and bed are cool to prevent any burns.

Disconnect the Bed Cover Wiring Harness

To begin, locate the wiring harness connector at the rear of the bed. Remove the connective clip using a flathead screwdriver, then disconnect the harness. Trace the wires forward to locate and disconnect the other end from the vehicle.

Most versatile truck bed cover on the market! - SMARTOP Platform - 2019+ Jeep Gladiator Installation
Most versatile truck bed cover on the market! - SMARTOP Platform - 2019+ Jeep Gladiator Installation
the back end of a pickup truck with an upholstered bed and leather seats
the back end of a pickup truck with an upholstered bed and leather seats
Optimize Your Jeep Gladiator: Truck Bed Divider Solution You Need!
Optimize Your Jeep Gladiator: Truck Bed Divider Solution You Need!

Coil the disconnected wires neatly and secure them with a cable tie. This prevents them from rattling or getting damaged during the removal process.

Removing the Tailgate and Access Panel

Loosen and remove the eight (8) 14mm bolts securing the tailgate to the bed. Lower the tailgate and set it aside. Remove the three (3) 10mm bolts under the bed rail access panel and lift it off.

AD

Use the flathead screwdriver to remove any remaining clips securing the bed cover to the access panel. Set the access panel aside temporarily.

a man is opening the back of his truck
a man is opening the back of his truck
Deck Covers
Deck Covers
Cheap DIY Jeep Gladiator rear seat delete
Cheap DIY Jeep Gladiator rear seat delete
Best Jeep Gladiator Tonneau and Bed Covers | RealTruck
Best Jeep Gladiator Tonneau and Bed Covers | RealTruck
Protect Your Gear in Style with Jeep Gladiator Tonneau Covers! 🛡️
Protect Your Gear in Style with Jeep Gladiator Tonneau Covers! 🛡️
Bed Rails On The Cheap
Bed Rails On The Cheap

Removing the Bed Covers

Now that you've accessed the bed rail system, you're ready to remove the bed covers themselves.

Each corner of the bed cover is secured by a U-shaped bolt. Use a socket wrench to loosen and remove these bolts. Start from one corner and work your way around the bed to maintain the order of removal.

AD

Side Rails Removal

Remove the four (4) 13mm bolts securing the side rails to the bed. These rails slot into the bed, so you might need to apply some force to pull them out. Lift up on the outer edge of the rail while wiggling it to disengage it from the bed.

Jeep Gladiator JT How to Remove Top
Jeep Gladiator JT How to Remove Top

Once the side rails are off, discard the nuts and bolts. You won't need them for reinstallation.

Front and Rear Cross Members Removal

Repeat the process for the front and rear cross members. These are secured by four (4) bolts each, and also slot into the bed. You might need to use a pry bar to help pop them out.

AD

With all components removed, you can now fully access the Jeep Gladiator's open bed. Enjoy the versatile space for your cargo or use the removable bed floor as a makeshift truck bed extension.

When reinstalling the bed covers, reverse the removal process, ensuring each component is properly aligned and securely fastened. Regularly inspect your Gladiator's bed covers for any signs of wear or damage to increase their longevity and your vehicle's overall performance. Happy driving!"

AD