Easy Steps to Remove Side Mirror Cover: A Comprehensive Guide
Whether you're replacing a damaged cover, performing routine maintenance, or merely curious about the process, knowing how to remove a side mirror cover is a useful skill. This task may seem daunting, but with the right tools and steps, anyone can accomplish it. Let's dive into the process, ensuring maximum safety and efficiency.
Before you start, gather your tools and find a suitable workspace. You'll need a flathead screwdriver, a safety glass removal tool if you have one, some rags, and maybe a pair of safety glasses.
Understanding Your Side Mirror Cover
Side mirror covers primarily protect the side mirror from scratches and damage. They also enhance the vehicle's aesthetic appeal. Knowing the purpose and components of your side mirror cover will help you navigate the removal process more confidently.



Most side mirror covers are made of plastic or rubber and are held in place with clips or screws. The exact type and method of attachment can vary depending on your vehicle's make and model. It's essential to familiarize yourself with your specific side mirror design before starting.
Locating the Retaining Clips or Screws
Begin by examining the mirror cover's underside. You should see several small openings or slots where the retaining clips or screws are located. If you can't see them, gently tilt the mirror cover upwards and look for them in the space between the cover and the side mirror's glass.



Don't worry if the openings or slots are not immediately apparent. Sometimes, they are hidden beneath a thin layer of paint or debris. Gently clean the area with a soft cloth and use a magnifying glass if necessary to locate them.
Identifying the Type of Retention Mechanism
Once you've found the openings or slots, determine the type of retention mechanism used. As mentioned earlier, this could be either clips or screws. Most side mirror covers use clips, but some may use screws or a combination of both.
Here's a quick way to identify them: If you can see the top of a small pin or lug sticking out of the opening, it's likely a clip. If you see a slot or indentation designed for a screwdriver, it's likely a screw.






Removing the Side Mirror Cover
Now that you've identified the retention mechanism, it's time to remove the side mirror cover. The process is essentially the same for both clips and screws, but with a slight variation.
Remember, patience and a steady hand are key. Damaging the cover or retention mechanism will make the process more challenging and may require you to purchase new parts.
Removing clips
Gently insert the edge of your flathead screwdriver or a safety glass removal tool into the opening. Apply steady, gentle pressure to push the clip inwards, towards the center of the side mirror cover.

You should feel the clip release with a satisfying 'pop'. Once the clip is released, move to the next clip and repeat the process. If you're having trouble, try using a bit of steady, gentle wiggling motion while applying pressure. If the clip still won't budge, you may need to apply gentle heat with a hairdryer to soften the plastic slightly.
Removing screws
If your side mirror cover is held in place with screws, use your flathead screwdriver to gently turn each screw counterclockwise. As the screw is loosened, you should feel resistance decrease until it turns easily. Once the screw is completely loose, remove it and set it aside.
Repeat this process for all screws until the side mirror cover is completely free. Be careful not to lose or mix up the screws. If they vary in length or type, this could complicate the reinstallation process.
Congratulations! You've successfully removed your side mirror cover. Remember, if at any point you feel unsure or uncomfortable, stop and consult a professional. Regular maintenance and careful handling will ensure your side mirror cover is always in good condition.




