Step-by-Step Guide: Easily Remove a Murphy Bed from Wall
When it comes to transforming your living space into a multifunctional haven, a Murphy bed is a smart and stylish solution. However, there may come a time when you want to remove your Murphy bed from its wall mount. Perhaps you're redecorating, moving, or looking to change up your room's layout. Whatever your reason, understanding how to properly remove a Murphy bed from the wall is crucial. This guide will walk you through the process step by step, ensuring a smooth and secure removal.
Before we dive into the process, safety is paramount. Always ensure your work area is uncluttered, and keep children and pets away from the work area. It's also wise to wear work gloves to protect your hands. Let's start by gathering the necessary tools: a drill (or screwdriver depending on your bed's hardware), a stepladder, a friend to assist if needed, and a few hours of uninterrupted time.
Preparing the Room and the Murphy Bed
The first step is to thoroughly prepare the room and the Murphy bed itself. Start by removing any decorative pieces or heavy furniture that might obstruct your work area. Then, clear the floor space, so the bed can be safely lowered and maneuvered.



Next, inspect the Murphy bed mechanism. Look for any visible hardware, such as bolts or screws, at the top and sides of the bed. These are typically what secure the bed to the wall. Your specific bed model may have unique hardware, so familiarize yourself with how it works.
Locating the Hardware
Murphy beds are usually secured to the wall using a lifting mechanism and a series of bolts or screws. The lifting mechanism, often a hydraulic piston or spring, is typically concealed within the bed's cabinet. The bolts or screws are usually located at the top of the cabinet, where it meets the wall.



If your bed uses a bolt-secured hinge system, you'll need a wrench or an adjustable spanner to unscrew the bolts. For those beds with screw-secured hinge systems, you'll need a drill or screwdriver. The specific hardware will determine the tools you'll use.
Safety Measures
Before disconnecting the bed from the wall, ensure you've done a full safety check. If the bed is heavy, which is usually the case, don't attempt removal by yourself. Ask a friend or family member to help, or consider hiring a professional.
Also, remember that the weight of the bed is supported by the lifting mechanism. Once you've disconnected the hardware, this support will be gone. Be ready to ease the bed down with a helper, and place something sturdy under the foot of the bed to prop it up if needed.






Removing the Murphy Bed from the Wall
With the room prepared and the hardware located, it's time to start the removal process. Begin by removing the bolts or screws securing the top of the bed to the wall. Be sure to brace the bed as you're working to prevent it from tilting forward.
As you remove the hardware, constantly check the stability of the bed. If at any point the bed feels unsteady, support it and temporarily stop the process until you're confident it's safe to continue. Remember, safety is your top priority.
Disconnecting the Lifting Mechanism
Once you've removed the bolts or screws, there might still be a lifting mechanism attached. If your bed uses a hydraulic piston or spring system, you'll need to disconnect this. For pistons, typically, a quick release valve or a pin that needs removal. Springs usually require disconnecting or removing pins holding them in place.

Again, consult your specific bed model instructions if available. If not, contact a professional or the manufacturer for guidance. Once disconnected, the bed should lower gently to the floor. If it's too heavy to lower by hand, carefully disconnect it while it's still up, then allow it to lower slowly.
Lowering the Bed to the Floor
The bed may need some maneuvering into its lowest position. If it's a bi-fold Murphy bed, carefully fold the bed in half, ensuring the two sections meet safely before proceeding. If it's a single-fold model, slowly lower it to the floor, keeping it balanced at all times.
If the bed has been stored against the wall for a long time, it might be stiff or difficult to move. Take your time, and avoid forcing it. If it's too difficult to handle, don't hesitate to ask for help or call a professional.
Congratulations! You've successfully removed your Murphy bed from the wall. Now, the possibilities for your room are endless. Whether you're redecorating or just need the extra space, enjoying your newly transformed room is the perfect reward for a job well done.





