How to Attach a Murphy Bed to the Wall: A Step-by-Step Guide
Streamlining your small space? A Murphy bed, also known as a wall bed, can be your ultimate solution. It's smart, space-saving, and adds a stylish touch to your room. But, to fully harness its benefits, you need to know how to attach a Murphy bed to the wall securely and correctly. Let's dive right in.
Before we start, ensure you have all the necessary tools and hardware. You'll typically need a drill, screwdriver, measuring tape, level, and the hardware that came with your Murphy bed. Safety first, always wear protective gear, including gloves and safety glasses, and work in a well-lit area.
Gather Your Supplies and Understand Your Bed
First things first, check your Murphy bed kit for an instruction manual. It should detail the specific hardware and steps for your bed. If you've misplaced it, most manufacturers provide manuals online. Always follow the specific manufacturer's guidelines first.



Here's a basic overview to get you started:
Required Tools and Materials
Besides the tools mentioned earlier, you might also need a socket wrench, an adjustable wrench, and a mallet for tapping pieces into place. The hardware provided should consist of screws, brackets, bolts, and nuts, and may also include a FD (floor dimer) or a 2-bearing system for the bed to pivot on.



Ensure all screws and bolts are of sufficient length to accommodate your bed and the wall material you're mounting it to (wood, metal, concrete, etc.). If you're unsure, consult a hardware store expert.
Understand the Mechanism
Most Murphy beds use a system of brackets, bolts, and gas pistons (springs) to fold and unfold your bed. Familiarize yourself with these components. The brackets are typically mounted on the bed frame, while the bolts and pistons face the wall.
Some systems may use a 2-bearing system, where the bed pivots on a central axis. Others might use a floor slider system, where the bed slides out on rails before pivoting down.






Measure and Prepare the Wall
Proper measurement is crucial to ensure your Murphy bed fits snugly and safely on your wall. Start by measuring from the floor to the ceiling and note down the measurement. This is the overall height where your bed will be mounted.
Next, measure the width of your bed frame. This will determine where you'll need to attach your mounting hardware. Ideally, the bed should pivot from the center. If your walls are uneven or you're not sure, consider involving a professional or using a laser level to ensure accuracy.
Locate Wall Studs
Murphy beds require significant support, so it's best to attach them to wall studs. Use a stud finder to locate these. In most cases, they're spaced 16 inches or 24 inches apart on center. Mark the locations for easy reference.

If you can't find wall studs, or they're not evenly spaced for your bed, consider using heavy-duty wall anchors or molly bolts to secure your bedերից. However, these aren't as strong as securing directly to studs, so always exercise caution when using them.
Mark Your Measurement Points
Once you've located your studs or chosen your anchor points, mark out where your bed brackets will attach. Use your bed frame as a guide, lining it up with the center of your marks. Make sure it's level and not too close to the ceiling, allowing enough room for the bed to fold down.
If you're unsure or struggling to visualize, consider creating a mock-up of your bed with paper or cardboard to ensure it's positioned correctly.
Attach the Brackets
Now that you've prepared your wall, it's time to attach the brackets. This process varies slightly depending on your bed's mechanism and manufacturer instructions. Always consult your specific manual for the most accurate advice.
Attaching Brackets with Bolts and Nuts
Some beds use bolts that screw into a metal plate or wall angle. Drill holes in your marked spots, inserting a drill bit of a similar size to your bolt's diameter. Fit the bolt through the bracket and wall, then secure it with a washer and nut. Tighten with a wrench, ensuring it's secure but not overtightened.
If using wall anchors, follow the manufacturer's instructions for drilling and inserting them. Once secure, attach the brackets as above.
Installing Pivotal Hardware
Some beds use a pivot system, like a 2-bearing system or gas pistons. These often come with pre-drilled holes. Align these holes with your marks and wall, then secure them using the provided hardware.
Some gas pistons may need to be pre-assembled into the bracket. If you're unsure, consult your manual. Always ensure the gas pistons are facing the correct direction for smooth operation.
Attach the Bed Frame and Operate
With the brackets attached, it's time to attach your bed frame. Align the frame with the brackets and secure it using the appropriate hardware. This is often a combination of screws, bolts, or knobs.
Secure the Headboard
If your Murphy bed comes with a headboard, attach this now. It's often designed to fit over the bed frame and face the wall when the bed is up. Ensure it's secure and won't wobble or fall when the bed is in use.
Test the Mechanism
Once everything's secure, test your Murphy bed mechanism. It should fold down and up smoothly. If it's resistance, tighten any loose screws or bolts. If it's too difficult to lift, you may need to adjust the gas pistons for a smoother operation. Most gas pistons can be adjusted with a specialist key, usually provided with your bed.
Congratulations! You've now successfully attached your Murphy bed to the wall. Enjoy the space savings and comfortable sleep this smart solution provides.
Remember, regular maintenance is key to ensuring your Murphy bed operates smoothly for years to come. Check the hardware periodically, tightening any loose screws or bolts, and ensure the gas pistons are well-oiled. With proper care, your Murphy bed will be a cherished addition to your home.





