how to pull a tarp over a roof

Tarp Roofing: How to Securely Cover Your Roof

By Rachel Moore
AD

Putting a tarp over your roof can be a quick, temporary solution to protect it from the elements, especially during harsh weather or emergencies. It can also serve as a makeshift tent for repairs, before you have the time or resources to do a full repair. This article will guide you through the process step-by-step, ensuring you get the job done safely and effectively.

Securing a tarp properly over your roof requires planning, the right tools, and a bit of know-how. It's not as simple as just throwing a tarp over your roof and weighing it down with some bricks. Here's how to do it right.

Preparation: Gather Your Tools and Equipment

Before you start, ensure you have all the necessary tools and equipment on hand to avoid unnecessary trips up and down the ladder. Here's what you'll need:

AD
How To Attach a Tarp to a Leaking, Storm-Damaged Roof - Today's Homeowner
How To Attach a Tarp to a Leaking, Storm-Damaged Roof - Today's Homeowner
12+ Creative Tarping a Roof Ideas
12+ Creative Tarping a Roof Ideas
How To: Tarp a Roof
How To: Tarp a Roof

prehension: Gather Your Tools and Equipment

Before you start, ensure you have all the necessary tools and equipment on hand to avoid unnecessary trips up and down the ladder. Here's what you'll need:

How to Tarp a Roof: Things Every Homeowner Should Know
How to Tarp a Roof: Things Every Homeowner Should Know
How to Tarp a Roof - ARK Tarps
How to Tarp a Roof - ARK Tarps
How to temporarily cover your roof when it leaks using a tarp!
How to temporarily cover your roof when it leaks using a tarp!
  • A tarp, slightly larger than your roof
  • A utility knife
  • Duct tape
  • Number 8 nails or galvanized roofing nails
  • A hammer or staple gun
  • A ladder
  • Roofing cement (optional, but helpful for leaks)

Choosing the Right Tarp

When selecting a tarp, size matters. You want one that's slightly larger than your roof to ensure adequate coverage and to allow for overhang on all sides. The material of the tarp is also crucial. Heavy-duty, durable tarps are best for protecting your roof.

Consider the weight of the tarp as well. A medium-weight tarp is usually sufficient for most roof sizes, but heavier-duty tarps might be needed for larger roofs or areas with heavy snowfall. Always opt for a tarp with reinforced corners and hemmed edges for added durability.

AD

Safety First: Preparation and Planning

Before you start climbing onto your roof, ensure it's safe to do so. Remove any debris that might cause you to slip, and check for weak spots that could give way under your weight. If your roof is very steep or you're not comfortable with heights, consider hiring a professional.

Best way to secure a tarp
Best way to secure a tarp
Emergency Roof Tarp Fix, Step-by-Step 2025
Emergency Roof Tarp Fix, Step-by-Step 2025
How to Properly Tarp a Roof for Weather Protection
How to Properly Tarp a Roof for Weather Protection
How to Tarp a Roof | HURRICANE PREP
How to Tarp a Roof | HURRICANE PREP
The Ultimate Guide to Roof Tarping: Protecting Your Home in Emergency Situations
The Ultimate Guide to Roof Tarping: Protecting Your Home in Emergency Situations
How To Tarp A Roof Properly (If Yours Was Damaged By A Hurricane, Tornado, Or Severe Weather Storm)
How To Tarp A Roof Properly (If Yours Was Damaged By A Hurricane, Tornado, Or Severe Weather Storm)

Also, plan where you'll place your ladder. It should be positioned on a stable, level surface and extend at least 3 feet past the edge of your roof. This provides a safe area to work and ensures you can reach the entire roof surface.

Securing the Tarp: Step-by-Step

Now that you're prepared, it's time to secure the tarp to your roof. Here's how:

AD

prehension: Gather Your Tools and Equipment

Before you start, ensure you have all the necessary tools and equipment on hand to avoid unnecessary trips up and down the ladder. Here's what you'll need:

  • A tarp, slightly larger than your roof
  • A utility knife
  • Duct tape
  • Number 8 nails or galvanized roofing nails
  • A hammer or staple gun
  • A ladder
  • Roofing cement (optional, but helpful for leaks)

Step 1: Positioning the Tarp

Begin by spreading out your tarp on the ground. If possible, lay it out where you can easily access it from your ladder. Once you're ready, carefully climb onto your roof, making sure to stay on the stronger, supportive structures like ridges or hips.

AD

Position the tarp onto the roof, centering it as much as possible. Remember, you want it to overhang the edges, so you'll have to trim it later. For now, focus on getting it roughly into place.

Step 2: Trimming the Tarp

Once the tarp is roughly in place, use your utility knife to cut away any excess material from the edges. Be careful not to cut too close to the edges, as you'll need some overlap for securing the tarp.

After you've cut away the excess, use your utility knife to cut small slits along the edges of the tarp. This will allow you to wrap the tarp around the edges of your roof, providing a more secure fit.

Step 3: Securing the Tarp

Now it's time to secure the tarp to your roof. Start at one corner, driving a nail through the tarp and into the roof. If you're using a staple gun, secure it to the tarp and staple it to the roof. Make sure your nails or staples are spaced evenly and driven or stapled in far enough to secure the tarp but not so far that they damage your roof.

Once you've secured the first corner, carefully pull the tarp taught and secure it to the next corner. Continue pulling the tarp taught and securing it to each corner, working your way around the roof. Make sure to pull the tarp as taught and secure it as evenly as possible.

Step 4: Securing the Edges

Now that the tarp is secured in place, it's time to secure the edges. Use the slits you cut earlier to wrap the tarp around the edges of your roof. Use duct tape to secure the tarp to the edges, making sure to overlap the slits to create a water-tight seal.

For added security, you can also use roofing cement to seal the edges. This is especially helpful if you're dealing with a leaky roof and need to prevent water from seeping under the tarp.

Step 5: Check Your Work

Once you've secured the tarp, take a step back and check your work. Make sure the tarp is pulled taught and secured evenly. Check the edges to ensure they're securely taped or cemented. Make any necessary adjustments before finishing.

If possible, get a second pair of eyes to help check your work. Often, it's easier to spot mistakes from a different perspective.

Congratulations! You've successfully pulled a tarp over your roof. Regularly inspect your tarp, especially after heavy rain or snow, to ensure it's still secure and doing its job. Remember, a tarp is only a temporary fix. If your roof is leaking or damaged, you'll need to hire a professional roofer to repair it properly.

AD