How to Quickly Protect Your Roof: A Step-by-Step Guide to Covering with a Tarp
Weather conditions can be unpredictable, and it's crucial to safeguard your roof against potential damage. While a thorough roof repair or replacement might be the long-term solution, temporarily covering your roof with a tarp can provide immediate protection. Here's a comprehensive guide on how to cover your roof with a tarp effectively and safely.
Before you start, gather the necessary tools and materials. You'll need a long, durable tarp (specifically designed for roofing, if possible), a hammer or a staple gun, roofing nails or staples, scissors, a ladder, and safety equipment like a harness or a safety line.
Preparing the Roof
The first step is to ensure your roof is clean and clear of any obstacles. Remove any debris, leaves, or twigs that could get in your way or cause accidents.



Inspect your roof for any sharp edges, nails sticking out, or other hazards. These could tear your tarp or cause injuries. If necessary, file down sharp edges and secure loose nails.
Measuring and Preparing the Tarp
Measure your roof to determine the size of the tarp needed. Your tarp should be large enough to cover the damaged area generously, but not so large that it catches the wind and blows away.



Next, prepare the edges of the tarp. Fold the edges over to create a reinforced hem, about 6 inches wide. This will protect the tarp from tearing and provide a safe place to secure it with nails or staples.
Securing the Tarp
Start at the top of your roof and work your way down. Lay the tarp flat and smooth it out as much as possible. Use roofing nails or a staple gun to secure the tarp to the roof, spacing the fasteners about 12-18 inches apart.
Use additional nails or staples to secure the tarp to any rafters, peaks, or valleys on your roof. This will help prevent the tarp from blowing off in windy conditions.






Folding and Overlapping
Once the top of the tarp is secured, grab the bottom edge and fold it up to meet the top edge. Overlap the two edges by at least 12 inches. Secure this overlap with nails or staples, ensuring it's taut and won't lift up in the wind.
Repeat this process with any remaining edges or corners, always ensuring the seams overlap by at least 12 inches. For larger tarps, consider creating sections by folding the tarp in half and securing it, then unfolding and securing the next section.
Inspecting and Maintaining the Tarp
After securing the tarp, inspect it thoroughly to ensure there are no gaps or loose edges. Walk around the perimeter of your home to check the tarp from different angles.
Regularly check the tarp for signs of wear and damage. Bad weather can weaken the tarp over time, so it's essential to monitor its condition and replace it if necessary. Additionally, ensure that nothing is resting on the tarp, as this can cause damage or punctures.
Remember, while a tarp provides temporary protection, it's not a permanent solution. If your roof is damaged, it's crucial to hire a professional roofer for a thorough inspection and repair. Until then, a well-secured tarp can help prevent further damage and provide peace of mind.





