how to make a hose holder

Easy DIY Hose Holder: Step-by-Step Guide

By Ashley Williams
AD

Ever found yourself tripping over a garden hose sprawled across your lawn? Or struggled to reach that perfect watering spot because your hose couldn't stretch any further? It's time to keep your garden tidy and efficient with a DIY hose holder. Not only does it save space and prevent tangles, but it also adds a touch of organization to your outdoor area. Let's dive into how to make a simple yet effective hose holder using standard materials.

Before we start, remember that the goal is to create a sturdy, long-lasting hose holder that can accommodate your hose's length and diameter. We'll explore two main designs: a wall-mounted holder and a freestanding option. Both designs are easy to make and perfect for beginners.

Wall-Mounted Hose Holder

The wall-mounted hose holder is ideal for those with limited space or who want to keep their hose within easy reach. It's also great for homes with small gardens or patios. By keeping your hose off the ground, you'll prevent dirt and debris from building up, making your hose last longer.

AD
13 DIY Garden Hose Holder Ideas That Hide the Mess (Not Just Store It)
13 DIY Garden Hose Holder Ideas That Hide the Mess (Not Just Store It)
How to Make A Wooden Hose Holder
How to Make A Wooden Hose Holder
How to Make a Garden Hose Holder DIY That Is Cheap Sturdy and Genuinely Good Looking
How to Make a Garden Hose Holder DIY That Is Cheap Sturdy and Genuinely Good Looking

To create a wall-mounted holder, you'll need the following materials:

  • 1x4 or 1x6 pressure-treated lumber (length depends on your hose length)
  • Teak oil (optional, for finishing)
  • Screws and screwdrivers
  • Hole saw or spade bit (decimal size matching your hose diameter)
  • Drill and driver set
  • Cordless drill

Measuring and Cutting

First, measure your hose and cut your lumber to match its length, plus an extra 12 inches for the brackets. If you're using a 1x6 board, you can create two holders from one board.

13 Creative DIY Garden Hose Holder Hacks to Keep Your Yard Tidy
13 Creative DIY Garden Hose Holder Hacks to Keep Your Yard Tidy
An Aesthetic Yard Hose Holder You Can DIY
An Aesthetic Yard Hose Holder You Can DIY
11 DIY Rose Reels You Can Make For Your Garden
11 DIY Rose Reels You Can Make For Your Garden

Mark the center of your board, then measure and mark the width of your hose. This will help you place the holes where the hose will rest.

Creating the Holes

Using your hole saw or spade bit, drill through the marked spots. Make sure to clamp your board to a sturdy surface or use a drill press for better accuracy.

AD

Counter-sink the screws using a countersink drill bit. This will help create a flush surface for attaching the brackets.

Water Hose Storage
Water Hose Storage
a blower sitting on the ground next to a house
a blower sitting on the ground next to a house
DIY Garden Hose Stand
DIY Garden Hose Stand
a garden hose and gardening gloves hanging on a wall next to a potted plant
a garden hose and gardening gloves hanging on a wall next to a potted plant
10 DIY Garden Hose Holder Plans
10 DIY Garden Hose Holder Plans
3 Easy DIY Hose Holders
3 Easy DIY Hose Holders

Attaching the Brackets

Now it's time to create brackets that will hold your hose holder. You'll need two pieces of lumber, each 3 inches long and 1 inch wide. Cut these into L-shapes.

Position the brackets on the bottom of your holder board, ensuring they're level and centered. Drill pilot holes and attach them using screws.

AD

Finally, apply teak oil to protect and finish your hose holder. Once dry, attach it to the wall using screws or by drilling it directly into a stud if available.

a man is holding a blue hose attached to a wall
a man is holding a blue hose attached to a wall

Freestanding Hose Holder

A freestanding holder is perfect for those who want a portable option or have multiple hoses to store. It's also great for storing hoses in garages or sheds. Let's explore a simple design using PVC pipe.

For this project, you'll need:

AD
  • 4x 10-foot long PVC pipe (schedule 40) in 1.5-inch diameter
  • 4x PVC end caps
  • 1x PVC 90-degree elbow fitting
  • 5x PVC cement and primer
  • PVC pipe cutter or saw

Creating the Base

Cut two pieces of PVC pipe into 24-inch lengths. These will serve as the base of your holder. Assemble them into a U-shape using a 90-degree elbow fitting and end caps. Use PVC cement and primer to secure the fittings.

Allow the cement to cure according to the manufacturer's instructions before moving on to the next step.

Setting Up the Hose Holders

Measure and cut four pieces of PVC pipe into lengths that match your hose's width. These will be the individual holders that keep your hose organized.

Using the remaining PVC pipe, create two lengths that match the distance between the base pipes. These will become the supports that connect to the base.

Attach the hose holders to the supports using PVC cement and primer. Allow this to cure. Then, attach the supports to the base pipe using the same process.

Your freestanding hose holder is now complete. You can apply a finish if desired, but PVC doesn't require sealing like wood.

Regularly cleaning and maintaining your DIY hose holder will ensure it lasts for years. Routinely inspect the fittings and pipes for any cracks or wear. For wooden holders, apply a fresh coat of sealant every year or as needed.

Embrace your green thumb and keep your garden tidy with these simple DIY hose holders. Not only will they make your outdoor chores more enjoyable, but they'll also add a touch of personality to your outdoor space. Happy gardening!

AD