how to make a pvc rod holder

How to DIY PVC Rod Holder: Easy Guide for Anglers

By Kevin Robinson
AD

Ever faced difficulties in securely storing or transporting a PVC rod? Worry not, for you can create your own PVC rod holder to ensure safety and utility. This guide will show you an easy method to make a PVC rod holder at home, requiring minimal tools and readily available materials.

There are numerous benefits to creating your own PVC rod holder. It's cost-effective, customizable, and you'll take pride in having created a useful tool yourself. Plus, you can adjust the design as per your specific needs.

Materials and Tools Needed

The materials and tools required are simple and affordable. You might even have them at home already.

AD
9 Practical PVC Fishing Rod Holder DIY Designs
9 Practical PVC Fishing Rod Holder DIY Designs
some fishing rods and poles with the words 19 easy diy fishing rod holder ideas
some fishing rods and poles with the words 19 easy diy fishing rod holder ideas
PVC Fishing Rod Holder
PVC Fishing Rod Holder

Materials:

  • PVC pipe (1/2 inch diameter, 10 feet length)
  • Electrical tape (thick)
  • Plastic caps for PVC pipes

Tools:

the inside of a boat with two umbrellas on it's stand and an american flag in the background
the inside of a boat with two umbrellas on it's stand and an american flag in the background
PVC Truck Bed Fly Rod Holder #shorts
PVC Truck Bed Fly Rod Holder #shorts
How To Make a DIY Fishing Rod Holder
How To Make a DIY Fishing Rod Holder
  • Hacksaw or PVC pipe cutter
  • Measuring tape
  • Pencil
  • Scissors

Cutting the PVC Pipe

The first step is to cut the PVC pipe into the desired lengths. The total length you cut will depend on the size of your PVC rod and how many segments you want your holder to have.

For instance, you might cut it into six segments, each 16 inches long. Use a measuring tape and pencil to mark these points, and then use the hacksaw or PVC pipe cutter to create clean, even cuts.

AD

Assembling the PVC Pipe Segments

Now that you have your PVC pipe segments, it's time to assemble them into a holder. Take one segment and insert the end of the PVC rod into it. Hold the bottom of the rod against a solid surface;

25 DIY Fishing Rod Holders You Can Make Easily
25 DIY Fishing Rod Holders You Can Make Easily
Basic Fishing Rod Holder
Basic Fishing Rod Holder
How to make a pvc pipe rod holder for bank fishing
How to make a pvc pipe rod holder for bank fishing
a white pipe with the words pwc rod holder hong kong on it's side
a white pipe with the words pwc rod holder hong kong on it's side
DIY Fishing Rod Holder - Well She Tried
DIY Fishing Rod Holder - Well She Tried
there are two fishing rods in the bucket
there are two fishing rods in the bucket

Then, start wrapping the electrical tape around the segment. Make sure the tape is taut, but not so tight that you put excessive pressure on the rod. Continue wrapping until you reach the end of the segment. Ensure that the tape is long enough to reach the opposite end.

Securing therod

After assembling, it's time to safeguard the PVC rod securely. The electrical tape ensures the rod doesn't move around inside the segments, but what if the segments themselves shift?

AD

The issue can be avoided by taping the segments together. Start with the bottom segment, taping around its base. Then move onto the second segment, wrapping the tape where they meet. Repeat this process until you've taped the segments together in a circular manner. Use as much tape as you deem necessary.

Fishing Rods Carrying Tube
Fishing Rods Carrying Tube

Finishing Touches

In the last step, add the PVC pipe caps to the top and bottom ends. This will prevent the rod from popping out.

Your PVC rod holder is now complete and ready to be used. With this, you can securely transport and store your PVC rod!

AD

Want to customize your holder further? Consider adding additional segments, varying the size of the segments, or even using different colored tape to make it visually appealing. Happy DIYing!

AD