Step-by-Step Guide: Laying a Herringbone Brick Floor like a Pro
Transforming a bland or worn-out floor into a stunning feature can be an incredibly rewarding project. One classic and elegant design you might consider is the herringbone pattern for your brick floor. This pattern not only adds aesthetic appeal but also creates a rustic, timeless ambiance. Here's a comprehensive guide to help you lay a herringbone brick floor like a pro.
Before we dive into the step-by-step process, it's essential to note that this project requires patience, precision, and a good understanding of bricklaying techniques. If you're a beginner, don't hesitate to practice first on a smaller scale or consider consulting a professional.
Preparation and Planning
Laying a herringbone brick floor involves careful planning and preparation. Here are key aspects to consider:



First, measure your room's dimensions accurately to determine how many bricks you'll need. Keep in mind that you'll need extra bricks for cuts and waste. A general rule of thumb is to buy around 10% more bricks than required.
Choose Your Bricks
Selecting the right bricks is crucial for your floor's longevity and appearance. Opt for frost-resistant, dense bricks with low water absorption. For a classic herringbone look, use rectangular clay bricks.



If you're using reclaimed or recycled bricks, ensure they're in good condition and have consistent sizes. Consider sourcing from reputable suppliers to avoid disappointment.
Gather Your Tools and Materials
Before you start, ensure you have all necessary tools and materials. These typically include:
- Bricks
- Laying course (sand and cement mixture)
- Thick and thin bedding sand
- lining sand
- Gloves
- Trowel
- Spirit level
- Tape measure
- Brickie's hammer and bolster
- Brick cutter (wet saw or nipping chisel)
- Shovel
- Wheelbarrow
- Brick layer's line
Laying the Substrate
Preparing the subbase is crucial for a durable floor. Here's how to do it:






A solid concrete subbase is usually recommended for brick floors. Ensure it's free of cracks and holes, and slopes slightly for drainage. If your subbase isn't concrete, consider using a damp-proof membrane before laying the bricks.
Prepare the BeddingSand
Prepare your bricklaying sand mix using thin sand and cement (1:3 ratio) for the bedding. This mix ensures stability and helps to create a strong bond between your bricks and the subbase.
Spread the bedding sand evenly across the subbase using a towel, ensuring it's around 25mm thick. Ensure it's level using a spirit level and a straight edge.

Lay the Bricks
Now that your subbase is prepared, it's time to start laying bricks. Start from the center of your room and work your way outwards. This method ensures your patterns line up and minimizes waste.
- Lay your first brick using your thin bedding sand mix and ensure it's level. Use a brickie's line for reference to maintain straight lines.
- Continue laying bricks towards the edges, ensuring each one is level, plumbed, and well-bedded. Use a striking tool and bolster to tap in your bricks gently if necessary.
- Once you reach the edges, cut your bricks to fit using your brick cutter. Never leave more than six inches at the edge.
Remember to maintain spacing between your bricks (joints) for pointing later on.
Creating the Herringbone Pattern
Creating the classic herringbone pattern requires careful planning and attention to detail. Here are some tips to help you:
The herringbone pattern consists of bricks laid at an angle, typically between 45° and 90°. Many opt for a 45° angle for a classic, symmetric look.
Layout Before You Lock it In
Before laying any bricks in the herringbone pattern, lay them out on the floor without mortar to ensure your design is aesthetically pleasing and balanced. Once satisfied, start laying them in with mortar.
To create the pattern, lay your bricks side by side with the short end facing outwards. Then, lay the next brick with its longer end pointing inwards, interlocking with the previous brick. Continue this pattern, working your way outward from the center.
Making Precise Cuts
When laying the herringbone pattern, you'll encounter areas where bricks don't fit perfectly. Use your wet saw or nipping chisel to cut these bricks to the required size. Ensure cuts are clean and precise for a professional finish.
Always wear protective gear and follow safety guidelines when using power tools or making cuts.
Pointing and Finishing
Once all bricks are laid, it's time for the final touch - pointing. Pointing fills the joints between bricks, seals the floor, and enhances the overall appearance:
Prepare Your Pointing Mix
Use a supo mix (sand, cement, and water) for pointing your bricks. For a classic look, mix aovalo a natural sand-cement mix without pigment. Alternatively, add pigment to match your brick color for a more subtle look.
Apply the Pointing
Using a pointing trowel, apply your pointing mix to the joints between bricks, filling them flush with the surface. Use a brush to remove excess mortar from the brick faces.
Allow the pointing to set slightly before using a bricklaying jointer or a piece of wood to create uniform joints. Finally, brush the floor clean with a stiff-bristled brush and allow it to cure for at least 28 days before using it heavily.
There you have it! A beautifully laid herringbone brick floor that will surely be the envy of your neighbors. Enjoy your newly transformed space!





