Laying Bricks on Dirt: A Step-by-Step Guide
Laying bricks on dirt ground might seem like a simple task, but understanding the best practices can ensure longevity and stability of your brickwork. This guide will walk you through the process, from preparing the site to laying the final brick.
Bear in mind, laying bricks on dirt requires careful consideration of the ground's instability. Here, we'll focus on foundations for small structures or patios, where the risk of movement is relatively low. For larger structures, consider hiring a professional.
Preparing the Site
Next, calculate the perimeter of your planned structure. Measure and mark out the dimensions using stakes and string. This will serve as your guide when laying bricks.
Creating a Flat Surface
Before you begin laying bricks, you need a flat surface to work on. Remove the top layer of dirt using a shovel or mattock until you reach firm, undisturbed soil.
Then, use a rake to create a roughly flat surface. If the area is large or has significant undulations, consider renting a concrete mixer and screed to achieve a truly level base.
Laying a Suitable Base
A solid base is essential for preventing movement and maintaining structural integrity. For small structures, a layer of compacted hardcore and sand should suffice.
Spread a layer of hardcore (gravel or crushed concrete) about 50mm deep. Compact it using a vibrating plate compactor. Then, add a 50mm layer of sharp sand, level it, and compact it again. This will give you a stable foundation for your bricks.
Laying the Bricks
Now that your site is prepared, it's time to start laying bricks. Start at a corner, and work your way around the perimeter in one direction, always laying the longest edge Against a straight edge or a wall.
Use a trowel to apply mortar to the bottom and sides of each brick. This technique, known as 'buttering', ensures a strong bond between the bricks and the mortar.
Maintaining Alignment and Level
As you lay each brick, ensure it's perfectly level. Use a spirit level to check both horizontally and vertically. Adjust the position of the brick in the mortar if necessary.
To maintain alignment, use a string line stretched along the wall or the marked-out perimeter. Lay your bricks against this line, ensuring the top edge is level and flush with the line.
Laying Bricks in Courses
Lay bricks in courses, working from side to side. Each course should be 'bonded' with the one below it to create a strong, interlocked pattern. Common bonds include stack bond, stretcher bond, and English bond.
After laying bricks in a course, use a rubber mallet to gently tap them down, ensuring they're firmly seated in the mortar. Then, move on to the next course, offsetting the joints to create a strong bond.
Finishing the Work
Once you've completed the perimeter, lay internal bricks, ensuring they're properly bonded with the surrounding wall. Continue laying bricks in courses until you reach the required height.
For small structures, you may need to install a concrete lintel over doors and windows. Ensure this is correctly positioned and appropriately supported before continuing to lay bricks above it.
Allow the mortar to cure for at least 48 hours before using or applying any load to your brickwork. Then, apply a suitable sealer to protect your bricks from moisture and weathering.
Laying bricks on dirt ground requires patience and careful attention to detail. By following these steps and taking the time to get each stage right, you can create a sturdy, long-lasting structure that will serve you well for years to come.


















