Step-by-Step: How to Install a Bathtub in an Existing Shower
Transforming your shower into a luxurious bathtub haven can be a rewarding upgrade, adding both comfort and value to your bathroom. While it's a project best left to professionals if you're not comfortable with DIY, it's entirely possible to install a bathtub in an existing shower with the right knowledge and careful planning. This comprehensive guide will walk you through the process.
Before you begin, ensure you're equipped with the necessary tools and materials. You'll need a sledgehammer, pry bar, adjustable wrench, screwdriver, tape measure, utility knife, level, and rubber gloves. For materials, you'll require a bathtub, cement backer board, silicon or silicone caulk, caulk gun, epoxy, plumbing supplies, and tile or bathtub surround.
Planning and Preparation
Your first step is to plan your installation. Measure your new bathtub to ensure it fits in your desired location and can accommodate your plumbing. You may need to install a shower valve or reroute your plumbing if the tub is larger or positioned differently.



Preparation involves turning off your water supply, draining your lines, and removing any existing fixtures and flooring. Safety first: always assume that wires are live and pipes contain water when performing home renovations.
Removing the Existing Shower
Start by disconnecting the water supply lines and removing any accessories like showerheads or fixtures. Use a utility knife to cut through any caulk or sealant around the shower base or tiles. Then, carefully pry off the shower base, surround, or tiles using a pry bar or sledgehammer.



You might find drained pipes or rotting wood underneath, so give the area a thorough inspection before proceeding. Remember to keep safety gloves on to protect against sharp edges, splinters, or mold.
Preparing the New Bathtub Site
Once the old shower is gone, measure and mark the tub's outline on the floor. If needed, level the area by adding cement or self-leveling compound. Next, install cement backer board on the walls, cutting it to size with a utility knife. This will help prevent water damage and support the new tub.
Ensure the backer board is secure by applying thinset mortar and screw the board onto the studs. Let it dry completely before proceeding.






Installing the Bathtub
Now it's time to physically move and install the bathtub. If needed, reinforce the floor joists to support the extra weight. Position the tub in place and ensure it's level and plumb.
Before securing the tub, test the fit of the plumbing fixtures. If necessary, make adjustments or modifications to the plumbing lines. Once everything fits, mark and cut any backer board or subfloor as needed. Apply a bead of silicon around the drain area before securing the tub to the floor.
Securing the Bathtub
Secure the bathtub to the floor and wall studs using L-brackets or other appropriate hardware. Coordinate the bracket placement with the location of your plumbing connections. Ensure the tub remains level as you secure it.

After securing the tub, you can install the faucet and shower components according to their manufacturer's instructions. Before reinstalling the water supply lines, ensure all connections are tight and that there are no leaks.
Finishing the Project
Finally, install the bathtub surround or tile, if applicable. Apply a generous bead of silicon around the entire tub and let it dry. Install any remaining fixtures, turn your water supply back on, and gradually increase pressure to test for leaks.
With your new bathtub installed, don't forget to break it in with a relaxing soak! Keep an eye on your plumbing connections periodically, checking for any leaks or signs of loosening.
Transforming a shower into a comfortable bathtub space can be a rewarding DIY project. By following this guide, you'll soon be enjoying a well-deserved soak in your newly installed bathtub.




