How to Fix a Leaky Roof: Step-by-Step Tarp Attachment Guide
Is your roof causing you concern with a concerning leak? You're not alone. Seasons can be harsh on our roofs, but there's a practical solution you can employ before you need to fully replace your roof. Attaching a tarp to a leaky roof can act as a temporary yet effective fix. Here's a step-by-step guide to help you get the job done right.
First, let's address the safety aspect. Whenever you're performing roof work, safety should be your priority. Ensure you have a stable ladder, secure your footing, and consider investing in a fall arrest system if the pitch of your roof is steep. Also, make sure the weather is dry and calm to avoid any accidents.
Preparing Your Roof for the Tarp
Before you start, inspect your roof. Remove any loose debris or algae that could impede the tarp's placement. If your roof has multiple layers of shingles, you might need to hire a professional to ensure the proper removal of the old layers.



Once your roof is clean, consider applying a primer on the problematic area. This extra step can help improve the tarp's adhesion and create a better barrier against the rain.
Gather Your Materials
Visit a local home improvement store to get your supplies. You'll need a tarp that's larger than your roof's square footage (yes, bigger is better) and millimeters thick. This will ensure it's strong enough to withstand wind and rain. Also, get some roofing nails, a hammer or nail gun, and a marker.



Choose a tarp made of heavy-duty polyethylene. It's durable, water-resistant, and relatively inexpensive. Avoid canvas tarps because they absorb water and can cause further leakage.
Calculate and Cut Your Tarp
Measure your roof, and then add several feet on each side. You'll need the extra material to overlap and secure the tarp. Draw the outline on the tarp with a marker. Remember, the edges should extend over the sides of the house to prevent any water from getting underneath.
Use a sharp utility knife to carefully cut along your marked lines. Be cautious not to cut yourself or damage the tarp. After cutting, carefully lift the tarp and place it on your roof.






Securing the Tarp
Once the tarp is on your roof, you'll need to secure it in place. The best way to do this is by using roofing nails. However, be careful not to nail where you'll need to run the tarp around chimneys or vents.
Start from the top and work your way down, folding the tarp as you go. Make sure each fold is secure with a nail. Use at least six nails per fold. For Safety, use nails with rounded heads to prevent puncturing the tarp.
Securing the Sides and Bottom
Once the top is secure, carefully fold the sides over the edges of the roof and nail them down as well. Ensure each corner is secure to prevent wind from lifting the tarp. For the bottom, you have a couple of options. You can fold it upwards and staple it temporarily for a smooth look, or you can leave it as is.

With the sides secured, you can trim any excess tarp from the bottom. Be sure to leave a few inches on each side for coverage. As a final touch, secure any loose folds with nails for maximum protection.
Monitor and Maintain
While a tarp can prevent further damage, it's not a permanent solution. Regularly inspect your tarp for signs of wear, tear, or lifting. Winter and summer can be especially harsh, so it's crucial to check the condition of your tarp after severe weather.
Also, consider the aesthetic of your home. Tarps can detract from your home's appearance. Why not look into professional roof repair services in the meantime? You need an expert to assess the damage and create a plan for restoration. The sooner, the better to prevent future issues.
Remember, a tarped roof is a temporary fix. It's crucial to schedule a professional inspection as soon as possible. In the meantime, you can take pride in knowing you've protected your home from further damage. Until then, take care, and be safe on your roof!
