How to Add a Skimmer to an Above Ground Pool
Looking to enhance the convenience and safety of your above ground pool? Adding a skimmer is a game-changer. This device not only helps to keep your pool clean but also ensures that your pool pump and plumbing system don't become clogged. Here's a comprehensive guide on how to add a surface skimmer to your above ground pool.
Before we dive in, it's crucial to choose the right skimmer. For above ground pools, a surface skimmer is your best bet. It's designed to float on the surface of the water, collecting debris and leaves, while allowing water to pass through to your pool pump and filter.
Preparation and Planning
Before you start, have all your tools and materials ready. You'll need a surface skimmer, a skimmer pole for installation, a skimmer ring, and some sturdy gloves. Also, ensure you have a flathead screwdriver, pliers, and a drill with a masonry bit for drilling holes if necessary.



Once you have your tools and equipment, the next step is to plan where you'll place your skimmer. The ideal location is opposite your return jets, allowing for even circulation and efficient debris collection.
Measuring and Marking
Use your skimmer pole to carefully measure and mark the center point of where you want to install your skimmer. This is usually about halfway between your pool's top lip and bottom, ensuring it remains submerged and functional.



Measure from the center mark you've made to create a square pattern that will accommodate the skimmer's dimensions. This will help guide you as you cut the hole for installation.
Cutting the Hole
Using your drill, carefully drill a hole in the center of your marked square. Then, use your jigsaw or pool cutter to extend this hole, creating a square or rectangular opening big enough for your skimmer to fit through.
Be careful during this step to maintain a straight line and prevent any tears in the pool wall. If you're using a pool cutter, follow the manufacturer's instructions for safe operation.






Installing the Skimmer
Once you've cut the hole, it's time to install your skimmer. Ensure your pool's water level is at the midway point of your skimmer's height for optimal performance.
Start by inserting the skimmer into the hole you've created. It should fit snugly, with the basket side facing the pool's interior. Some skimmers may come with a gasket to prevent leaks; if so, install this according to the manufacturer's instructions.
Securing the Skimmer
Use the skimmer pole to press the skimmer firmly into place. The skimmer should be level with the pool's surface, allowing for easy removal for cleaning or maintenance.

Some skimmers come with suction cups or screws for added stability. If yours does, secure it according to the manufacturer's instructions, ensuring it doesn't interfere with the skimmer's movement or functionality.
Connecting the Skimmer to Your Plumbing
Your skimmer should have a dedicated pipe leading to your pool pump. Connect this pipe to your skimmer, ensuring there are no leaks. You may need to use plumber's tape or a coupling to make this connection.
Once connected, test the system by turning on your pool pump. The water should flow smoothly from your pool, through the skimmer, and into your filter system. If there are leaks or obstructions, adjust your connections or check for any blockages.
Congratulations! You've successfully added a skimmer to your above ground pool. Regularly check your skimmer basket to remove debris, and cleaning your skimmer monthly will help maintain its functionality and your pool's overall cleanliness. Enjoy your convenient, low-maintenance pool setup!
