Mastering Above Ground Pool Skimmers: A Step-by-Step Guide
Are you making the most of your above ground pool this season? To keep it sparkling clean and safe for enjoyment, regular maintenance is key. One of the most important tools in your pool care kit is the skimmer. Yet, many pool owners are unsure about how to use an above ground pool skimmer effectively. In this guide, we'll walk you through the process step-by-step.
First, let's understand what a pool skimmer does. Basically, it's designed to remove surface debris - like leaves, bugs, and dirt - before they sink to the bottom and cause stains or clogs. By regular skimming, you'll minimize the need for harsh chemicals, making your pool water healthier and safer.
Understanding Your Above Ground Pool Skimmer
Before we dive into the how-tos, let's get to know your pool skimmer a bit better. Above ground pool skimmers come in two primary types: automatic and manual:



1. Automatic skimmers are connected to your pool's pump and skims the surface 24/7. They're convenient but may require more maintenance.
2. Manual skimmers, like the telepole skimmer, require you to physically move the net across the water's surface. They're cheaper but demand more effort.



Assessing Your Skimmer's Condition
Whether you've just installed your above ground pool or it's been up for a while, always start by inspecting your skimmer.
First, ensure it's properly attached and secure. Then, check for any visible cracks, gaps, or tears. If you spot any issues, repair or replace the skimmer as necessary.
Preparation Before Skimming
Before you start skimming, make sure the skimmer basket is clean and empty. Also, ensure your pool's pump and filter are functioning correctly. Any debris left in the skimmer basket can lead to clogs and reduce efficiency.






Additionally, the pool water's pH and chemical balance should be in the recommended range - 7.2 to 7.6 for pH and 1 to 3 ppm for combined chlorine. Balanced water prevents algae growth and enhances filter performance.
Manual Skimming Techniques
If you're using a manual skimmer, here are some tips for effective skimming:
Correct Skim Pole Height
Hold the skimmer pole at an angle, with the net about 3 to 5 inches below the water surface. This helps you collect more debris in one pass.
Also, keep the net's opening level with the water, not tilted downwards. This prevents water from flowing into the net, which can make skimming difficult.
Skimming Pattern
Start at one corner of the pool and work your way across, using a side-to-side motion. Move in a zigzag pattern for better coverage. Ensure you skim every area, especially along the edges, where debris tends to accumulate.
Once you've emptied your skimmer, continue from where you left off. Ideally, skim your pool daily during the summer months or whenever it leaves rain or wind.
Automatic Skimmer Maintenance
Regular maintenance helps ensure your automatic skimmer remains effective and efficient.
Inspecting the Skimmer Basket
Empty and clean the skimmer basket every week, or as necessary. If you're using an above ground pool, place the basket in a bucket of water to prevent debris from scattering.
While cleaning, inspect the basket for any signs of wear. If the holes are clogged or worn out, replace the basket to maintain optimal suction.
Checking the Suction Hose
The suction hose connects your skimmer to the pool's pump. Over time, algae and debris can build up in the hose, reducing suction power.
Every few months, disconnect the hose, flush it with fresh water, and soak in a pool hose cleaner. Ensure there are no cracks or kinks before reinstalling. Also, keep an eye on the hose's intake jet. If it's clogged or damaged, replace it immediately.
With regular skimming and proper maintenance, your above ground pool will remain pristine and inviting all season long. So, grab your skimmer and enjoy your pool while keeping it clean and safe. Happy swimming!



