ecosmart eco 11

EcoSmart ECO 11 Tankless Water Heater: Compact, Efficient, Endless Hot Water

By Laura Young
AD

The EcoSmart ECO 11 is a compact electric tankless water heater built for on-demand hot water in small homes, apartments, cabins, and point-of-use setups. Instead of storing hot water in a tank, it heats water as it flows, which means you are not paying to keep a full tank warm when nobody is using it. That design makes the ECO 11 especially appealing when space is tight and you want a simpler alternative to a traditional tank-style heater.

With 11 kW of heating power at 240 volts, the EcoSmart ECO 11 is not a universal whole-house solution for every climate. It can be an excellent fit for mild regions, single-fixture installations, or small households that stagger their hot water use. Understanding its flow rate, temperature rise, and electrical demands is the key to knowing whether it will perform the way you expect.

What the EcoSmart ECO 11 Is and Who It Suits

The EcoSmart ECO 11 belongs to EcoSmart's line of electric tankless water heaters. It uses self-modulating technology to adjust its power draw based on the water flow and the temperature you select. Because it does not rely on natural gas or propane, it needs no venting, no gas line, and no pilot light. It simply connects to a properly sized electrical circuit and your plumbing.

AD
Ecosmart Point-of-Use Electric Tankless Water Heater - Pack of 6, Size:2 In
Ecosmart Point-of-Use Electric Tankless Water Heater - Pack of 6, Size:2 In
EcoSmart 11800 W Tankless Electric Water Heater Mfr# ECO 11
EcoSmart 11800 W Tankless Electric Water Heater Mfr# ECO 11
EcoSmart ECO 11 13KW Electric Tankless Water Heater 240V Self-Modulating Tech
EcoSmart ECO 11 13KW Electric Tankless Water Heater 240V Self-Modulating Tech

This model is often chosen for bathrooms, kitchens, tiny homes, garages, and remote cabins where a full-size tank heater would be impractical. It can also work as a secondary heater for a specific fixture, such as a guest bathroom or an outdoor sink, while a larger system handles the rest of the house. The digital display lets you set the outlet temperature within a range that typically spans 80°F to 140°F, giving you direct control over comfort and safety.

Compact Electric Tankless Design

The physical footprint of the EcoSmart ECO 11 is one of its strongest selling points. It is small enough to mount on a wall in a utility closet, under a cabinet, or near the point of use, which reduces the amount of time you wait for hot water to arrive. Since there is no tank, you also free up valuable floor space that a conventional heater would occupy. The unit is lightweight compared with tank models, so installation does not require heavy lifting or reinforced flooring.

EcoSmart ECO-11 Electric Tankless Water Heater 13.6 KW 2 Bath
EcoSmart ECO-11 Electric Tankless Water Heater 13.6 KW 2 Bath
EcoSmart Eco 11 Tankless Water Heater Reviews ⚡💧
EcoSmart Eco 11 Tankless Water Heater Reviews ⚡💧
EcoSmart Fire Ghost Designer Fireplace
EcoSmart Fire Ghost Designer Fireplace

Its electric operation makes it flexible for retrofits where running a gas line or installing a vent would be expensive or impossible. That said, the compact size does not mean the installation is plug-and-play. The ECO 11 still needs a dedicated electrical circuit, proper wire gauge, and a secure plumbing connection. Mounting it close to the fixtures it serves can improve performance by reducing heat loss through long pipe runs.

Heating Power and Temperature Rise

The EcoSmart ECO 11 produces 11 kW of heating power at 240 volts, which translates to roughly 46 amps of current. Its real-world hot water output depends on the incoming water temperature and the flow rate. A simple way to think about it is temperature rise: the heater must raise the incoming groundwater or city water to your desired set point. The faster the water flows, the less temperature rise the unit can achieve.

AD

At a flow rate of about 1.5 gallons per minute, the ECO 11 can raise water temperature by approximately 50°F. If your incoming water is 60°F, that gives you roughly 110°F at the tap, which is comfortable for a shower. In colder months, when incoming water might be 45°F to 50°F, the same flow rate may produce water that feels only warm. Higher flow rates reduce the temperature rise further, so running a shower and a kitchen sink at the same time can quickly exceed the unit's capacity.

the tankless water heater is shown with its accessories
the tankless water heater is shown with its accessories
Eco-smart Eco 11 Electric Tankless Water Heater
Eco-smart Eco 11 Electric Tankless Water Heater

Installation, Electrical Requirements, and Real-World Performance

Installing the EcoSmart ECO 11 is more about electrical planning than plumbing. The heater requires a dedicated 240-volt circuit, and most installations call for a 50-amp double-pole breaker. Wire size must match the breaker, the length of the run, and local electrical codes. Many manufacturer guidelines list 8 AWG copper wire, but some cable types or local amendments may require 6 AWG. A licensed electrician should confirm the correct setup for your home.

Before buying the ECO 11, check your electrical service capacity. A 100-amp panel may not have enough spare capacity for a 50-amp circuit, especially if other large appliances are already drawing power. A 200-amp panel usually offers more room, but a load calculation is still necessary. Skipping this step can lead to nuisance tripping, overheated wiring, or an installation that fails inspection.

AD

Electrical Planning and Safety

Safety begins with a properly sized circuit and a code-compliant installation. The ECO 11 should be connected to a dedicated breaker, not shared with other high-demand appliances. Grounding must be correct, and the unit should be installed according to the manufacturer's clearance requirements. In many jurisdictions, a pressure relief valve is also required on the hot water outlet, so check local plumbing codes before finalizing the design.

It is also wise to install a shutoff valve and unions on the water lines, which makes future maintenance or replacement much easier. If your water supply contains high levels of minerals, an inline filter or descaling port can help protect the heat exchanger. Because the unit draws a significant amount of current, a visible disconnect switch near the heater is often required or recommended for service safety.

Efficiency, Maintenance, and Cost Considerations

Electric tankless heaters like the EcoSmart ECO 11 are highly efficient at the point of use because they do not have standby heat losses. Nearly all the electricity they consume goes directly into heating water. The trade-off is that they can create a large instantaneous electrical demand. Your operating cost will depend on your local electricity rate, how much hot water you use, and the incoming water temperature in your area.

AD

Maintenance is relatively straightforward. In hard water areas, descaling the unit annually helps prevent mineral buildup from reducing flow and heating performance. A simple vinegar flush with a small pump kit can extend the life of the heat exchanger. There is no anode rod to replace and no tank to rust or leak, but the unit still needs periodic inspection for leaks, loose connections, and sediment buildup. With proper care, an EcoSmart ECO 11 can provide reliable service for many years.

For the right home, the EcoSmart ECO 11 delivers a compact, efficient, and surprisingly capable hot water solution. Before you buy, confirm your incoming water temperature, peak flow rate, and available electrical capacity with a qualified electrician. When those pieces line up, this 11 kW tankless heater can quietly replace a bulky tank and keep hot water flowing on demand.

AD