DeWalt Table Saw DW745S: Compact Power for Precision Cuts
The DeWalt table saw DW745S has earned a loyal following among trim carpenters, remodelers, and DIY woodworkers who need a compact saw that can still handle real job site cuts. Rather than a full-size cabinet saw, this model focuses on portability, simple adjustments, and dependable 10-inch cutting power. Its reputation comes from doing the basics extremely well: ripping dimensional lumber, crosscutting trim, and making repeatable bevel cuts without demanding a trailer or a dedicated shop.
For anyone comparing compact table saws, the DW745S sits in a sweet spot. It is small enough to move by one person, yet it offers the blade size and rip capacity that make it useful for framing, decking, shelving, and finish work. The question is not whether it can replace a large stationary saw, but whether its specific mix of power, fence accuracy, and portability matches the way you work.
What the DeWalt DW745S Brings to the Job Site
At its core, the DW745S is a 10-inch compact table saw built around a 15-amp motor. That motor spins the blade at roughly 3,850 RPM, which gives the saw enough speed and torque to cut through common framing lumber, plywood, and hardwoods when paired with the right blade. The table is compact, but the right-side rip capacity reaches up to 20 inches, a number that matters when you are ripping shelving, stair stringers, or wide trim.
The saw is designed for mobility. It is not a heavy cabinet saw, and when paired with the rolling stand often included in DW745S packages, it can be moved around a garage, up a ramp, or across a job site without a second person. That portability does not come at the expense of basic cut quality, provided the fence is aligned and the blade is sharp. For contractors who move from room to room or site to site, that balance is the main attraction.
Motor, Blade, and Cutting Performance
The 15-amp motor is the heart of the DW745S. It provides enough power for ripping 2x4s, 2x6s, and sheet goods, and it handles crosscuts in trim and dimensional lumber with confidence. The saw ships with a 24-tooth carbide blade, which is a reasonable all-purpose choice for framing and rough carpentry. For finer work, swapping to a 40-tooth or 60-tooth blade will reduce tear-out and leave a smoother finish on hardwood and plywood.
Depth of cut is also respectable for a compact saw. At 90 degrees, it can cut through material up to about 3-1/8 inches, and at 45 degrees, it handles around 2-1/4 inches. That means it can bevel cut common 2x material for angled supports, chamfers, and simple joinery. The rack-and-pinion fence adjusts smoothly and locks down firmly, which helps you make repeatable rips without constantly measuring and rechecking the fence.
Portability and Stand Setup
One of the biggest reasons people search for the DeWalt table saw DW745S is portability. The saw itself weighs around 45 pounds, so it is manageable for one person to lift into a truck or set on a bench. When the model is bundled with a rolling stand, the entire setup becomes much easier to move across a driveway, shop floor, or job site. The stand also raises the saw to a more comfortable working height, which reduces fatigue during long ripping sessions.
Setup is straightforward. The fence, miter gauge, blade guard, and riving knife need to be checked before first use, and the blade angle should be verified with a square. Once dialed in, the saw can be folded or rolled into storage without a major teardown. The on-board storage for the push stick, blade wrench, and miter gauge helps keep small parts from disappearing in a messy truck bed, which is a small but appreciated detail on a job site tool.
Using and Maintaining the DW745S
A compact table saw only performs as well as its setup and maintenance. The DW745S rewards owners who take a few minutes to align the blade, check the fence, and keep the table clean. Because it is often used for rough carpentry and finish work in the same week, it needs to transition between blades and accessories without losing accuracy. Understanding its safety features and maintenance needs will make the saw safer, smoother, and longer lasting.
Dust collection, blade choice, and outfeed support are the three areas where users can get the most improvement. The saw has a dust port that can be connected to a shop vacuum or dust collector, but no compact saw captures everything. Adding a dedicated shop vac, using a featherboard, and building a simple outfeed table can turn the DW745S into a much more capable workstation without changing its portable character.
Safety Features and Best Practices
The DW745S uses DeWalt's Site-Pro Modular Guarding System, which includes a blade guard, riving knife, and anti-kickback pawls. The riving knife is especially important because it keeps the kerf from closing behind the blade when cutting tensioned lumber. The guard can be removed for specific non-through cuts, but it should be reinstalled immediately afterward. These features are not optional accessories; they are core to safe table saw operation.
Safe technique matters just as much as the guards. Always use a push stick when ripping narrow pieces, keep your hands clear of the blade path, and stand slightly to one side of the blade rather than directly behind it. Use featherboards for consistent pressure, support long boards with an outfeed roller or table, and unplug the saw before changing blades or making adjustments. Hearing protection, safety glasses, and a dust mask are basic job site essentials.
Maintenance, Blades, and Accessories
Routine maintenance for the DW745S is simple. Brush or vacuum sawdust from the motor vents, table, and fence rails. Check the blade for pitch buildup and clean it with a dedicated blade cleaner. Apply a thin coat of paste wax to the cast table to reduce friction and rust, but avoid silicone-based products that can interfere with finishes. Periodically check the blade angle, fence parallelism, and miter slot alignment to keep cuts accurate.
Blade selection makes a huge difference. A 24-tooth ripping blade cuts fast in dimensional lumber, a 40-tooth general-purpose blade handles trim and plywood, and an 80-tooth blade is better for fine crosscuts and melamine. Useful accessories include a zero-clearance insert, a high-quality miter gauge, a shop vacuum hose, and a rolling stand if your model did not include one. These additions are modest in cost compared with a larger saw and can noticeably improve results.
If your projects involve trim, framing, shelves, decks, or small-shop furniture, the DeWalt table saw DW745S is a practical tool that earns its space. It is not the biggest or quietest saw on the market, but it is compact, proven, and easy to live with when you need accurate cuts without a permanent shop setup. Take the time to align it, feed it the right blade, and respect its safety features, and it will remain a dependable partner for years of hands-on work.