dewalt dcd708

DeWalt DCD708 Review: Compact Brushless Drill Power You Can Trust

By Joshua Lewis
AD

The DeWalt DCD708 is a compact 20V MAX brushless drill/driver that has earned a loyal following among tradespeople and serious DIYers. It is part of DeWalt’s Atomic lineup, which focuses on tools that are smaller and lighter without giving up the power needed for everyday drilling and fastening. If you have been searching for a drill that fits into tight cabinets, overhead spaces, and crowded tool bags, the DCD708 is worth a close look.

This article breaks down the DCD708’s real-world performance, battery compatibility, ergonomics, and best uses. You will also see how the bare tool and kit options compare, along with the limitations you should know before buying. By the end, you should have a clear idea whether this compact DeWalt drill belongs in your setup.

DeWalt DCD708 Performance and Specifications

The DCD708 runs on DeWalt’s 20V MAX battery platform and uses a brushless motor rated at 340 unit watts out. It has a two-speed gearbox with 0-450 RPM in low and 0-1,650 RPM in high, plus a 1/2-inch ratcheting chuck and a 15-position clutch. Those numbers place it firmly in the compact drill/driver class rather than the heavy-duty hammer drill category.

AD
Lowe's Is Clearing Out Power Tools Just in Time for Father's Day
Lowe's Is Clearing Out Power Tools Just in Time for Father's Day
Mais potência, mais bateria, mais vantagem! 🚀
Mais potência, mais bateria, mais vantagem! 🚀
DeWalt Impact!
DeWalt Impact!

In practical terms, the brushless motor delivers more runtime per charge and a longer service life than older brushed models. The drill is designed for wood, metal, and plastic, and it handles screwdriving with far more control than a basic entry-level drill. It is not a replacement for a rotary hammer or a full-size hammer drill when you need to bore into concrete.

Power and Speed for Common Tasks

The 340 UWO rating is enough for most household and light commercial work. Low speed gives you the torque needed for driving screws, using hole saws, and turning auger bits in softwood. High speed is better for small twist bits, pilot holes, and fastening tasks where you want quicker rotation rather than maximum torque.

DeWalt, Bohrmaschine + Akkuschrauber, DCD 708 (Bohrschrauber)
DeWalt, Bohrmaschine + Akkuschrauber, DCD 708 (Bohrschrauber)
dew xr 18 volt cordless drill with charge and battery, includes 2 batteries
dew xr 18 volt cordless drill with charge and battery, includes 2 batteries
four power tools sitting next to each other on a wooden table with a cell phone
four power tools sitting next to each other on a wooden table with a cell phone

For example, the DCD708 can assemble furniture, install cabinet hardware, drive deck screws in softwood, and drill pilot holes for shelving. It can also handle smaller holes in metal with step bits or twist bits if you use cutting oil and let the tool do the work. It will slow down with large hole saws, long lag bolts, or repeated heavy drilling, which is normal for a compact brushless drill.

Battery Platform and Runtime

The DCD708 works with DeWalt 20V MAX batteries, including 1.5Ah, 2.0Ah, 4.0Ah, 5.0Ah, and PowerStack packs. The bare tool version, often sold as the DCD708B, does not include a battery or charger, so it makes sense if you already own compatible DeWalt batteries. The kit version, commonly the DCD708C2, typically includes two 2.0Ah batteries, a charger, and a bag.

AD

Runtime depends heavily on battery size and the task. A compact 2.0Ah pack is fine for light assembly and quick repairs, while a 4.0Ah or 5.0Ah battery gives you longer sessions for drilling and driving. If you want the lightest possible setup for overhead work, a small pack is ideal; if you are building a deck or framing, a larger pack will reduce interruptions.

Cordless Drill Set: DEWALT Power for DIY Home Tasks
Cordless Drill Set: DEWALT Power for DIY Home Tasks
12 power, hand and auto tools dads will love this Father's Day
12 power, hand and auto tools dads will love this Father's Day
Dewalt
Dewalt
a bunch of tools sitting on top of a metal table in front of a black wall
a bunch of tools sitting on top of a metal table in front of a black wall
: DEWALT Drill & Impact Driver Combo Kit - 20V MAX with 2...
: DEWALT Drill & Impact Driver Combo Kit - 20V MAX with 2...
a hand holding a drill with the words can you hear the differences?
a hand holding a drill with the words can you hear the differences?

Design, Ergonomics, and User Experience

The DCD708 is built to be easy to carry and control. It measures roughly 6.9 inches front to back and weighs about 2.6 pounds without a battery, which makes it noticeably smaller than many full-size drills. The handle has a rubber overmold that improves grip, and the balance is comfortable whether you are working at bench height or reaching overhead.

DeWalt also paid attention to the details that matter during daily use. The 1/2-inch ratcheting chuck accepts a wide range of bits and accessories, the 15-position clutch helps prevent overdriving screws, and the built-in LED illuminates dark work areas. These features make the drill feel more refined than a basic contractor-grade tool.

AD

Compact Size and Comfort

The compact frame is one of the DCD708’s biggest advantages. It slips into tighter spaces than a full-size hammer drill, including between studs, under sinks, inside cabinets, and around installed appliances. That smaller footprint reduces fatigue when you are drilling overhead or working in awkward positions for long periods.

Dewalt drill for home use
Dewalt drill for home use
DEWALT POR DENTRO
DEWALT POR DENTRO

For tasks like installing curtain rods, mounting TV brackets, assembling flat-pack furniture, or running electrical boxes, the size is a genuine benefit. It may not have the raw torque of a larger drill, but it is easier to maneuver and less likely to wear out your wrist during repetitive fastening. Many users find it becomes the drill they reach for first because it is simply more convenient.

Chuck, Clutch, and LED Features

The 1/2-inch ratcheting metal chuck grips bits securely and tightens by hand without a chuck key. That makes bit changes fast, especially when you are moving between drill bits and driver bits. The 15-position clutch is useful for screwdriving because it lets you dial in the amount of torque before the clutch disengages, reducing stripped screw heads and damaged materials.

AD

The LED light is another practical addition. It stays on briefly after the trigger is released, which helps you see the work surface after you stop drilling. A belt hook is often included or available, allowing you to hang the tool from your belt or pocket instead of setting it down in a busy workspace. These small features add up to a smoother, more efficient experience.

Applications, Limitations, and Buying Advice

The DCD708 is best understood as a compact brushless drill/driver, not a do-everything power tool. It excels at drilling wood, metal, and plastic, and it drives screws with excellent control. It is a strong choice for electricians, cabinet installers, finish carpenters, homeowners, and anyone who needs a lightweight drill for maintenance and repair work.

Its main limitation is the lack of a hammer function. If your work involves concrete, brick, or stone, you will want a dedicated hammer drill or rotary hammer. The DCD708 also has less torque than premium compact hammer drills, so very large hole saws, heavy mixing, and long lag bolts may require a more powerful tool.

Best Use Cases and Materials

In wood, the DCD708 handles pilot holes, counterbores, spade bits, and smaller hole saws without trouble. In metal, it can drill through thin steel and aluminum with the right bit, cutting fluid, and moderate pressure. In plastic, it works well for electrical boxes, PVC, and enclosures, especially when you use low speed to avoid melting the material.

Typical jobs include hanging shelves, building planters, installing door hardware, repairing fences, assembling playsets, and doing automotive interior work. For concrete anchors, tile, or repeated masonry drilling, choose a hammer drill instead. For long deck screws and heavy fastening, an impact driver will usually be faster and more efficient than the DCD708.

Kit vs Bare Tool and Accessories

If you already own DeWalt 20V MAX batteries and a charger, the DCD708B bare tool is the most economical route. If you are new to the platform, the DCD708C2 kit is often a better value because it includes two 2.0Ah batteries, a charger, and a carrying bag. That gives you everything needed to start working right away.

Good accessories to pair with the drill include a quality bit set, step drill bits, hole saws, driver bits, and a magnetic bit holder. A larger battery pack is worth adding if you plan to drill for hours rather than minutes. If you do a lot of screwdriving, consider adding a DeWalt impact driver to complement the DCD708 rather than relying on the drill for every fastening task.

Choosing the DeWalt DCD708 comes down to matching the tool to your workload. If you need a lightweight, brushless drill that can handle most household and trade tasks, it is an easy recommendation. If your days are filled with concrete anchors or heavy auger bits, step up to a hammer drill or a higher-torque model. Either way, pair the DCD708 with sharp bits and a battery that matches your project length, and it will keep earning its place in your bag.

AD