18mm drill bit

18mm Drill Bit Guide: Sizes, Uses, Top Picks & Pro Tips

By Olivia Allen
AD

An 18mm drill bit is a metric cutting tool that creates holes just over 11/16 inch in diameter, making it a genuinely useful size for woodworking, electrical work, plumbing, automotive repairs, and light masonry. It is large enough to pass cables, dowels, bolts, and small pipes, yet still compact enough for portable drills when the bit has the right shank.

Because 18mm is neither a tiny pilot size nor a heavy-duty core bit, it fills a practical gap in many tool kits. The challenge is that an 18mm drill bit comes in several geometries, shank styles, and materials, and choosing the wrong one can burn the bit, crack the workpiece, or produce a sloppy hole.

Understanding 18mm Drill Bit Dimensions and Standards

The number 18mm refers to the cutting diameter, not the shank size. In metric terms, that equals 18 millimeters, or approximately 0.7087 inches. A hole produced by an 18mm drill bit will usually be slightly larger than the bit itself because of runout, point geometry, and the natural clearance needed for the bit to rotate without binding.

AD
Drill bit for SDS-Max chuck ø 18 mm
Drill bit for SDS-Max chuck ø 18 mm
Uxcell 5pcs Diamond Hole Saw Drill Bit 3-18mm Glass Drill Bit for Ceramic/Marble/Granite
Uxcell 5pcs Diamond Hole Saw Drill Bit 3-18mm Glass Drill Bit for Ceramic/Marble/Granite
a drill that is in the shape of a spiral
a drill that is in the shape of a spiral

Drill bits are manufactured to standards such as DIN 338 for jobber-length twist drills, and masonry bits often follow similar diameter conventions with carbide tips. An 18mm bit may be a twist drill, brad point bit, Forstner bit, auger bit, spade bit, hole saw, or SDS Plus masonry bit, and each style follows its own design rules for flutes, point angle, and cutting action.

Metric Size vs. Inch Equivalents

In inch-based projects, 18mm is often confused with 11/16 inch, but those sizes are not identical. An 11/16 inch bit measures 0.6875 inches, while an 18mm drill bit measures 0.7087 inches. The closest common fractional sizes are 45/64 inch at 0.7031 inches and 23/32 inch at 0.7188 inches, so 18mm sits between them.

an image of a drill bit in the shape of a diamond on a white background
an image of a drill bit in the shape of a diamond on a white background
a metal tool with a long handle on a white background
a metal tool with a long handle on a white background
a close up view of the end of a metal object
a close up view of the end of a metal object

That difference matters when you are fitting dowels, bolts, bearings, grommets, or shelf pins. If a plan calls for an 18mm dowel, an 18mm drill bit is the correct match. If a plan calls for a 3/4 inch hole, an 18mm bit will be undersized because 3/4 inch equals 19.05mm. For clearance holes around an M18 bolt, an 18mm bit may be too tight, and a 19mm or 20mm bit is usually more appropriate.

Shank Styles and Chuck Compatibility

An 18mm cutting diameter does not mean the shank is 18mm. Many 18mm drill bits for portable drills use a reduced shank, often 3/8 inch or 1/2 inch, so they can fit standard chuck sizes. A 1/2 inch chuck can normally hold shanks up to 13mm, so a reduced shank is essential for most hand-held drilling tasks.

AD

Other shank types include hex shanks for quick-change holders, SDS Plus shanks for rotary hammers, and Morse taper shanks for drill presses and magnetic drill presses. Before buying an 18mm drill bit, check your tool’s chuck capacity, spindle type, and recommended shank. Using an SDS Plus bit in a standard chuck, or a reduced-shank bit in a hammer drill without the correct mode, can damage the tool and the workpiece.

How to Choose the Right Drill Bit
How to Choose the Right Drill Bit
A Primer on Tungsten Carbide Drill Bits
A Primer on Tungsten Carbide Drill Bits
D4507 - 5/32" HSS Brad Point Bit
D4507 - 5/32" HSS Brad Point Bit
Drill Bit Size Chart in Inches, mm, cm With Guide
Drill Bit Size Chart in Inches, mm, cm With Guide
a metal tool with an open end on a white background
a metal tool with an open end on a white background

Matching the 18mm Drill Bit to the Job

Material choice dictates the bit’s point angle, flute design, and cutting edge. Wood calls for sharp spurs or slicing edges, metal requires heat-resistant high-speed steel, and masonry needs a carbide tip that can pulverize stone and concrete. An 18mm drill bit made for one material can fail quickly in another, even if the diameter is correct.

Hole quality also depends on speed, feed pressure, and support. Drilling an 18mm hole in softwood is fast and forgiving, while the same size in stainless steel requires slow speed, steady pressure, and cutting fluid. Concrete demands a rotary hammer and a bit that can clear dust without overheating.

AD

Woodworking and Plastic Applications

For woodworking, an 18mm brad point bit or Forstner bit usually gives the cleanest results. Brad point bits track accurately on flat surfaces and reduce splintering, while Forstner bits create flat-bottomed holes for hinges, plugs, and decorative work. An 18mm auger bit is useful for deep boring in timber, and a spade bit can handle rough framing holes where speed matters more than a polished finish.

In plastic, an 18mm drill bit must be used carefully because acrylic, polycarbonate, and PVC can crack or chip. A brad point bit, low spindle speed, and a backing board help control breakout. For pipe pass-throughs and cable routing, confirm the actual outside diameter of the fitting, because an 18mm hole may be too small for common conduits and too large for a snug decorative grommet.

Metal, Masonry, and Concrete Applications

In metal, an 18mm high-speed steel twist drill is a serious cutting tool that needs a pilot hole, low RPM, and lubrication. A 1/4 inch or 3/8 inch pilot hole reduces the load on the larger bit and helps keep the hole round. For sheet metal, a step drill or hole saw may be safer than an 18mm twist drill, especially if the material is thin and prone to grabbing.

AD

In masonry and concrete, an 18mm SDS Plus drill bit is the standard choice for anchors, pipe sleeves, and cable entries. Use a rotary hammer in hammer mode, let the tool do the work, and pull the bit out periodically to clear dust. For brick, block, and soft stone, a masonry bit in a hammer drill may be sufficient, but hard concrete will require SDS Plus or SDS Max tooling and a bit with a robust carbide tip.

Keeping the right 18mm drill bit on hand makes those mid-sized holes far less frustrating, whether you are running cable through a stud, fitting a dowel, or setting an anchor. Check the shank, point style, and material before you drill, and let the bit’s design guide your speed and pressure. A sharp, correctly matched 18mm bit turns a difficult job into a clean, repeatable result.

AD