worx 24v battery charger

Worx 24V Battery Charger: Fast, Reliable Power for Your Tools

By John Allen
AD

If you rely on a Worx 24V cordless tool for trimming hedges, edging lawns, or tackling yard cleanup, the battery charger is the piece of equipment that keeps everything moving. A Worx 24V battery charger is designed to safely refill 24-volt lithium-ion battery packs, converting standard household AC power into the DC voltage your battery needs. Without a compatible charger, even a perfectly good battery becomes dead weight.

Choosing the right charger, however, is not as simple as grabbing the first Worx charger you see online. Worx has multiple battery platforms, and a 20V PowerShare charger will not work with a 24V pack. This guide explains what to look for in a Worx 24V battery charger, how to charge your batteries without shortening their lifespan, and what to do when the charger or battery stops cooperating.

Worx 24V Battery Charger Basics and Compatibility

The Worx 24V battery charger is built around a specific voltage and connector system. Most units, including the commonly referenced WA3735 model, take 120V AC power from a wall outlet and output roughly 26V DC to charge a 24V lithium-ion pack. The charger monitors voltage and temperature while charging, then switches to a maintenance or shutoff state when the battery reaches full capacity.

AD
Worx Battery Charger Instructions: How to Charge Your Worx Batteries with Ease - Tool Trip
Worx Battery Charger Instructions: How to Charge Your Worx Batteries with Ease - Tool Trip
the charger is plugged in to an external power cord
the charger is plugged in to an external power cord
Batteries d'outils électriques authentiques WORX 20V 4Ah 6Ah 8Ah WA3553 WA3575 WX132, WX133, WX803,
Batteries d'outils électriques authentiques WORX 20V 4Ah 6Ah 8Ah WA3553 WA3575 WX132, WX133, WX803,

Because Worx has produced several battery lines, compatibility is the first thing to verify. A charger labeled for 24V is not interchangeable with a 20V PowerShare charger, a 40V charger, or a 56V charger. The physical terminals may look similar at a glance, but the voltage and charging profile are different. Always check the label on your battery and charger before plugging anything in.

What Makes the Worx 24V Charger Different from Other Worx Chargers?

The main difference is the charging profile. A 24V lithium-ion battery requires a charger that can deliver the correct current and voltage curve without overstressing the cells. The Worx 24V charger is engineered for that specific pack architecture, including the battery management system that protects against overcharge, over-discharge, and short circuits.

WORX Charger for 20v Lithium-ion Battery for sale online | eBay
WORX Charger for 20v Lithium-ion Battery for sale online | eBay
an orange and black battery with the words 20 volt power shaker on it
an orange and black battery with the words 20 volt power shaker on it
WORX Original Pure 20V 6Ah 8Ah Battery Applies To WA3014 WA3551 WG630 WG629 WX372 WX390 WX394 WX550
WORX Original Pure 20V 6Ah 8Ah Battery Applies To WA3014 WA3551 WG630 WG629 WX372 WX390 WX394 WX550

For example, a Worx 20V PowerShare charger is designed for 20V max batteries used in the company’s most popular tool lineup. A 24V charger often serves older or specialized Worx outdoor power equipment. Using the wrong charger can cause the battery to charge incompletely, overheat, or fail prematurely, and it may void your warranty. When in doubt, match the charger model to the battery model.

Battery Types and Model Numbers to Match

Most Worx 24V battery chargers are intended for 24V lithium-ion packs. Common battery model numbers in this category often begin with WA35 or similar prefixes, but the exact number matters more than the prefix. The charger model WA3735 is widely sold as a 24V lithium-ion charger, and it is frequently paired with 24V batteries used in Worx lawn and garden tools.

AD

You should also confirm the battery chemistry. If you have an older nickel-cadmium pack, do not assume a lithium-ion charger will work with it. Likewise, a lithium-ion battery should not be placed on a charger designed for NiCad or NiMH cells. Amp-hour rating is less critical for compatibility; a 2.0Ah battery will simply take longer to charge than a 1.5Ah battery on the same charger.

the battery and charger are connected to each other
the battery and charger are connected to each other
Worx Dynamic Help Center
Worx Dynamic Help Center
an image of a battery charger on a white background
an image of a battery charger on a white background
an image of a charger that is plugged into the back of a car
an image of a charger that is plugged into the back of a car

Charging Your Worx 24V Battery Correctly

Proper charging habits can add years of useful life to your Worx 24V batteries. The charger itself is only part of the equation. Where you charge, when you charge, and how long you leave the battery on the charger all affect performance. A little care goes a long way, especially if you depend on your Worx tools through multiple seasons.

Start by choosing a dry, well-ventilated area with a stable outlet. Avoid charging in direct sunlight, in a damp garage corner, or near flammable materials. If you just finished a heavy job, let the battery cool for 15 to 30 minutes before placing it on the charger. Charging a hot battery can trigger a thermal protection mode or, over time, reduce cell capacity.

AD

Step-by-Step Charging Process

Plug the Worx 24V charger into a working wall outlet first, then slide the battery into the charger until it clicks or seats firmly. The LED indicator should light up to show that charging has begun. On most models, a solid red light means the battery is charging, while a solid green light means the charge is complete. Charge time varies by battery capacity, but compact 24V packs often finish in one to two hours.

When the green light appears, remove the battery from the charger. Although many Worx chargers have built-in protection against overcharging, leaving a battery on the charger for days or weeks is not ideal. If you will not use the battery for a while, store it in a cool, dry place at roughly 40 to 60 percent charge. Recharge it every few months to keep the cells from dropping too low.

LED Indicators and Error Signals

LED indicators are the charger’s way of communicating. A steady red light usually means the battery is taking a charge. A steady green light means the cycle is complete. Some Worx 24V chargers use a flashing red or alternating red-green pattern to indicate a fault, such as a battery that is too hot, too cold, or no longer accepting a charge.

AD

If you see a fault signal, unplug the charger and remove the battery. Let both sit at room temperature for a while, then inspect the metal contacts for dirt, corrosion, or bent terminals. Try a different outlet and, if possible, test the charger with another compatible battery. If the same error appears with a known-good battery, the charger may be failing. If the error follows the battery, the pack may need replacement.

Maintenance, Troubleshooting, and Replacement

A Worx 24V battery charger does not need much maintenance, but it does need common sense. Keep it away from moisture, dust, and extreme temperatures. Wipe the exterior with a dry cloth when it gets dirty, and never spray water or cleaning solvents into the vents. The charging contacts on both the charger and battery should stay clean and dry for reliable connections.

Power surges and unstable electrical outlets can also shorten a charger’s life. If your garage or shed is prone to flickering lights or storm-related outages, consider plugging the charger into a surge protector. Do not yank the cord to unplug the charger; pull the plug body instead. These small habits help prevent internal damage that can lead to intermittent charging or complete failure.

Common Worx 24V Charger Problems

One of the most common complaints is a charger that shows no light at all. This usually points to a power issue: a tripped outlet, a loose cord, or an internal fuse. Test the outlet with another device, inspect the charger cord for cuts or kinks, and try a different outlet before assuming the charger is dead. If the charger still shows no signs of life, replacement is usually the safest option.

Another frequent issue is a battery that never reaches a full green light. This can happen when the battery has aged, one or more cells are unbalanced, or the charger is not delivering enough current. Overheating, buzzing, or a burning smell are serious warning signs. Stop using the charger immediately. Do not open the housing, because capacitors inside can hold a dangerous charge even when unplugged.

When and How to Replace Your Charger

Replace your Worx 24V battery charger if the cord is frayed, the housing is cracked, the terminals are corroded beyond cleaning, or the charger repeatedly fails to charge a known-good battery. A damaged charger is not worth risking, especially when lithium-ion batteries are involved. Buy a genuine Worx replacement or a charger specifically listed as compatible with your battery model and voltage.

Before buying, compare the cost of a standalone charger with a kit that includes a new battery. Sometimes the bundle is only slightly more expensive and gives you a fresh pack as a backup. When you retire an old charger, dispose of it through a local e-waste or battery recycling program rather than throwing it in the trash. If you purchase a new unit, keep the receipt and register the product if the manufacturer offers a warranty.

With the right Worx 24V battery charger, your cordless tools stay ready for everything from spring trimming to fall cleanup. Take a moment to confirm your battery’s voltage and model, keep the contacts clean, and avoid charging in extreme conditions. That small bit of attention will help you get more runtime, more seasons, and fewer interruptions from your Worx equipment.

AD