Unveiling the Color Code for a 470-Ohm Resistor
The color coding on a resistor's bands indicates its resistance and tolerance values. For a 470 ohm resistor, understanding the color code is vital.
This article guides you through determining what color code would represent a 470 ohm resistor.
Understanding Resistor Color Code
The resistor color code system uses four or five bands, each signifying a specific digit or multiplier. The first two bands indicate the significant figures, the third indicating the multiplier, and the fourth indicating the tolerance.



Here's a color code table for quick reference:
| Digit | Color | Multiplier |
|---|---|---|
| 0 | Black | ×1 |
| 1 | Brown | ×10 |
Determining the Significant Figures
For a 470 ohm resistor, the significant figures are '47'. We'll need to find the colors corresponding to 4 and 7.



The first band's color is brown (for 1) and the second band's color is violet (for 7).
Finding the Multiplier
The third band indicates the multiplier. Since 470 is already less than 1000, we'd like a multiplier between 1 and 10. After 1 (which is brown), the next color is 'red', representing 2.
Consideration for Tolerance
The final band (or fourth in a five-band resistor) indicates the tolerance. A common tolerance level is 5%, represented by the gold color.





Combining these, a 470ohm resistor with a tolerance of 5% would have a color code of Brown, Violet, Red, Gold.
Verify the Resistance Values
To validate the color code, you can use the formula: Resistance = (First Digit × Multiplier) × 10^(Second Digit).
For our case, it would be (1 × 2) × 10^(7) = 470 ohms, confirming our color code is correct.
Reading Resistors Without Color Coding
иногда бывают случаи, когда необходимо прочитать значение сопротивления у резистора без цветовых полос. В этом случае некоторые производители добавляют сильное серебро или золотую краску к концам резистора.
These added markings allow you to directly read the resistance value, similar to how digital multimeter works. However, this is not a standard practice and may vary between manufacturers.
In conclusion, understanding the resistor color code is key to choosing the right resistor for your electronic circuit. The color code for a 470 ohm resistor with a 5% tolerance is Brown, Violet, Red, Gold. Always double-check your measurements and color codes to ensure you're working with the correct resistor value.



