Waterproofing Brick: Best Sealers, Methods & Tips for a Dry, Durable Wall
Brick has earned its reputation as one of the most durable building materials on earth, but durability and waterproofness are two different things. A fired clay brick is porous by nature, packed with microscopic channels that allow water to move in and out of the wall. Waterproofing brick is not about encasing masonry in a plastic shell; it is about controlling how water enters, travels through, and escapes the wall so that the brick, the mortar, and everything behind them stay dry.
Get that balance wrong and the damage appears slowly — a chalky white haze on the surface, paint peeling inside the house, mortar joints crumbling, or a brick face flaking away after a hard winter. Get it right and a brick wall can shrug off decades of driving rain with nothing more than an occasional inspection. This guide explains how brick absorbs moisture, which waterproofing products genuinely work, and how to apply them so the protection lasts.
Why Brick Absorbs Water and What Moisture Damage Really Costs
Brick is made from clay, shale, and sand fired at temperatures above 1,800 degrees Fahrenheit. That firing process fuses the material into a hard ceramic, but it also leaves behind a network of tiny, interconnected pores. Depending on the brick type, absorption rates commonly fall between 4 and 20 percent by weight. Soft, handmade, or reclaimed bricks sit at the high end of that range, while dense engineering bricks sit near the bottom.
The mortar joints between those bricks are often the weakest link. Traditional mortar is intentionally softer and more porous than the brick so that it acts as a sacrificial layer, flexing and absorbing movement instead of cracking the units themselves. The trade-off is that mortar can wick water faster than the brick it holds together, which is why so many moisture problems trace back to the joints rather than the face of the wall.
The Science of Porosity and Capillary Action
Water does not simply sit on the surface of a brick waiting to dry. Capillary action pulls it inward, the same force that draws coffee up a paper towel. A single brick may only be a few inches thick, but during a wind-driven rainstorm, the outer inch can reach saturation within minutes. From there, moisture migrates deeper into the wall assembly, where it meets insulation, sheathing, framing, and interior finishes.
Drying works in the opposite direction, and this is where breathability becomes critical. Masonry wants to release moisture through both faces of the wall. If the interior is coated with a low-permeability paint or a vapor barrier, and the exterior is sealed with a film-forming coating, water that gets in has nowhere to go. Trapped moisture is what causes freeze-thaw damage, mold growth, and the musty smell that tells homeowners something is wrong long before visible damage appears.
Warning Signs: Efflorescence, Spalling, and Mold
Efflorescence is the white, powdery bloom that appears on brick after wet weather. It is the residue of water-soluble salts carried to the surface by migrating moisture and left behind when the water evaporates. Efflorescence itself is cosmetic, but it is a reliable indicator that water is moving through the wall, and it deserves investigation rather than a quick scrub.
Spalling is the more serious stage. Water absorbed into the brick expands roughly nine percent when it freezes, and that pressure is strong enough to shear off the face of the brick entirely. Alongside spalling, watch for crumbling mortar joints, cracks that reappear after repair, interior paint blistering, and dark staining on north-facing walls that stay damp the longest. Catching these signals early keeps a modest waterproofing job from turning into a masonry restoration project.
Choosing the Right Waterproofing Approach for Brick
There is no universal brick waterproofing product, and the wrong choice can create more problems than it solves. The guiding principle is straightforward: repel liquid water from the outside while still allowing water vapor to escape. Products that violate this principle may look effective for a season or two, but they tend to trap moisture and accelerate the exact damage they were meant to prevent.
It also helps to think of waterproofing as one part of a larger water management system. Clean gutters, properly sloped flashing, functioning weep holes, and ground that slopes away from the foundation often do more to keep a brick wall dry than any sealer. Sealers are the finishing touch on a wall that already sheds bulk water correctly.
Breathable Penetrating Sealers
Penetrating sealers based on silane, siloxane, or silane-siloxane blends are the gold standard for above-grade brick. These clear liquids soak into the pores rather than sitting on top of them, forming a hydrophobic lining that repels water while leaving the pore structure open. The wall keeps its natural appearance, its texture, and its ability to dry outward.
They are available in solvent-based and water-based formulations, and in cream versions thick enough to apply with a roller or brush for one-coat coverage on vertical surfaces. Expect coverage in the range of 100 to 200 square feet per gallon, depending on how porous the brick is, and plan on reapplying every five to ten years. For historic masonry and any wall where appearance matters, a breathable penetrating sealer is almost always the right answer.
Film-Forming Coatings and Paints
Acrylic sealers, elastomeric coatings, and masonry paints work by creating a continuous skin over the brick. They shed water quickly, resist dirt, and can change the color of a wall, which makes them appealing for renovations. The problem is that skin. Most film-forming products have low vapor permeability, so moisture that enters through hairline cracks, window perimeters, or from the interior side cannot escape and instead pushes the coating off from behind.
That said, film-forming products have legitimate uses, particularly on brick that has already been painted and cannot realistically be stripped. Below-grade foundation walls face a different set of conditions entirely — hydrostatic pressure rather than wind-driven rain — and require cementitious or elastomeric systems engineered for that job. Integral water repellents added to mortar at the mixing stage are another option worth discussing with a mason during new construction or repointing.
- Breathable penetrating sealers: best for unpainted, above-grade brick and historic masonry.
- Film-forming acrylics and elastomerics: suitable for already-painted walls or specific below-grade applications.
- Integral mortar additives: a preventive measure during new build or repointing, not a retrofit solution.
- Drainage and flashing repairs: essential groundwork before any sealer is applied.
Preparation, Application, and Long-Term Upkeep
Most waterproofing failures are preparation failures. A sealer applied over dirt, efflorescence, mildew, or loose mortar cannot bond properly, and it will start failing within a year. Budget at least as much time for cleaning and repair as for the actual application, and never seal a wall that is still wet from rain or from a recent washing.
Weather conditions matter just as much as surface condition. Most manufacturers specify application temperatures between 50 and 80 degrees Fahrenheit, with no rain forecast for at least 24 to 48 hours afterward. Direct sun, high wind, and hot brick surfaces cause the product to flash off before it can penetrate, so early morning or late afternoon application on a mild, overcast day is often ideal.
Cleaning and Repairing Before You Seal
Start by removing efflorescence with a stiff dry brush, then follow with a cleaner formulated for masonry. Avoid muriatic acid on older or softer brick, since it can etch the surface and leave salts behind. Mildew and algae need an oxygenated or bleach-based cleaner that is thoroughly rinsed afterward. For general grime, a low-pressure wash under 1,200 psi with a wide fan tip is safe; sandblasting and high-pressure nozzles are not, as they erode the fired skin of the brick and open it up to even more water absorption.
Once the wall is clean, repoint any crumbling mortar joints with a mix that is softer and more permeable than the brick itself. On pre-1930s masonry, that usually means a lime-based mortar rather than a hard Portland cement mix. Repair cracks with a flexible masonry sealant, replace spalled units where structural integrity is affected, and then let everything cure and dry for 24 to 72 hours. A moisture meter reading taken before sealing will confirm the wall is ready.
Applying the Treatment and Knowing When to Reapply
Apply penetrating sealer with a low-pressure garden or pump sprayer, working from the bottom of the wall upward in manageable sections. Flood the surface until it stops absorbing, also known as saturation to refusal, and back-roll or brush rough textures to ensure even coverage. If the product calls for two coats, apply the second while the first is still damp to the touch. Mask windows, doors, light fixtures, plants, and any adjacent concrete or paving, because overspray can leave permanent marks.
After application, allow 24 to 48 hours of dry weather for curing. Test the result by spraying a small section with water — it should bead up and run off rather than soaking in. Plan on reapplying every five to ten years, and inspect the wall annually, paying closest attention to north-facing elevations, walls exposed to prevailing wind, and areas under poorly maintained gutters. A fresh application is far cheaper than repointing or replacing brick.
For homeowners weighing DIY against hiring a professional, the math is worth running. Materials for a penetrating sealer typically run 20 to 50 cents per square foot, while a professional masonry contractor charges roughly one to three dollars per square foot including prep work — more if repointing or crack repair is involved. Two-story walls, steep pitches, and historic masonry are usually best left to someone with the right ladders, sprayers, and insurance.
Waterproofing brick is really an exercise in patience: fix the drainage first, clean and repair the wall second, and only then apply a breathable sealer that lets the masonry dry itself out. If your brick is showing efflorescence, crumbling joints, or that first hint of flaking, the smartest move is to have the wall assessed before the next freeze-thaw cycle does the deciding for you.