Step-by-Step: How to Install a Door Knob [Video Guide]
Ever found yourself in a pickle, twisting and pulling at a door knob that simply won't budge? It's a frustrating experience, but it's often a simple fix. Installing a new door knob or replacing an old one might seem daunting, but with the right guide, it's a straightforward task you can tackle on your own. Let's dive into the step-by-step process of installing a door knob, ensuring your space remains secure and functional.
Before we begin, ensure you have the necessary tools and materials. You'll need a new door knob set, a screwdriver (usually Phillips), an old rag or towel, and maybe a drill if you're adjusting the knob height. This guide assumes you're replacing a round doorknob, which is the most common type.
Understanding Your Door Knob Set
Before you start unscrewing, understand the components of your new door knob. The typical set includes a doorknob, a latchbolt (the part that retracts when you turn the knob), a strike plate (for the latchbolt to fit into), and a few screws. Some sets might also include a faceplate, which covers the latchbolt and provides a more finished look.



Your door knob set might come with variations like levers or handles, backsets (the distance from the edge of the door to the center of the hole), and finishes like brushed nickel or satin chrome. The most common backset is 2-3/8 inches, but check your existing door to ensure a smooth fit.
Preparing Your Door
First, remove any hardware from the door, including the old knob, screws, and faceplate if present. You might need to use a screwdriver to pry off the faceplate. Be careful not to damage the door.



Next, make sure the latchbolt hole is clear of any obstructions. If necessary, widen the hole slightly to accommodate your new knob. Remember to measure and mark the center point for the latchbolt hole, usually at 3-3/8 inches or 3-7/8 inches from the edge of the door, depending on your backset.
Installing the Latchbolt
Insert the latchbolt into the door, ensuring it's facing the correct direction. With the latchbolt in place, insert the latchbolt spring and the retaining ring. The spring should fit snugly around the latchbolt, securing it in place.
Now, insert the rosette (the decorative plate that covers the latchbolt) into the door. Ensure it's facing the correct direction and fits snugly against the door. Some knob sets might require you to hammer the rosette into place using a center punch and a hammer.






Mounting the Faceplate and Doorknob
Attach the faceplate (if included) to the door using the screws provided. Make sure it's centered and level before securing it tightly. If your knob set doesn't include a faceplate, your rosette should provide a finished look.
Now, insert the interior and exterior doorknobs into the door. Ensure they line up correctly with the latchbolt and are properly positioned for turning. Use the provided screws to securely fasten the knob into place. You might need to drill pilot holes first to prevent the screws from stripping the wood.
Installing the Strike Plate
Hold the strike plate (the metal plate that the latchbolt fits into) against the jamb (the side of the door frame) and mark the screw holes. Drill pilot holes if necessary. Position the strike plate so that the latchbolt fits snugly when the door is closed, and secure it with screws.

If the strike plate doesn't fit properly, you might need to chisel out a little more of the jamb. Be careful not to damage the jamb or create a gap where the latchbolt doesn't fit snugly.
Finishing Touches
Test the door by opening and closing it several times to ensure the new knob fits properly and turns smoothly. Adjust the latchbolt or the knob height as needed for a perfect fit.
Consider applying a small amount of lubricant, like graphite powder or silicone spray, around the latchbolt to ensure smooth operation for years to come.
There you have it! With a little patience and the right tools, you've successfully installed a new door knob. Now, go ahead and check off another task from your home improvement list. Happy DIYing!





