unicorn spit table top

Unicorn Spit Table Top: DIY Guide to Vibrant, One-of-a-Kind Furniture Makeovers

By Mark Miller
AD

What exactly is a unicorn spit table top? In the world of DIY furniture and creative finishes, a Unicorn SPiT table top refers to a table surface that has been transformed with Unicorn SPiT, a water-based gel stain and paint known for its intense colors, blendable consistency, and wood-grain-friendly transparency. Instead of settling for a flat, factory finish, makers use this product to create swirls, ocean waves, galaxy effects, rustic glazes, and custom color stories that make a table feel personal and artistic.

The catch is that Unicorn SPiT is not a standalone topcoat. It is a colorant, not a protective finish. A table top faces spills, heat, scratching, and daily cleaning, so the real magic happens when the color is sealed correctly. Understanding how the product behaves, how to prep the surface, and which sealer will hold up to real life is the difference between a stunning piece and a sticky, short-lived experiment.

Why Unicorn SPiT Works Well on Table Tops

Unicorn SPiT has a thick, gel-like texture that stays where you put it, which makes it far easier to control than thin dyes or watery stains. It can be brushed, sponged, rag-rubbed, spritzed with water, and layered without instantly muddying the colors. That control is why it has become a favorite for table tops, especially on wood where the grain can still show through and add depth.

AD
Unicorn SPiT and Glitter Tabletop.
Unicorn SPiT and Glitter Tabletop.
This 'Unicorn Spit' Gel Stain Can Turn Anything Into A Magical Piece of Art
This 'Unicorn Spit' Gel Stain Can Turn Anything Into A Magical Piece of Art
Get Crafty With Unicorn SPiT
Get Crafty With Unicorn SPiT

Another advantage is versatility. You can use it straight from the bottle for bold saturation or dilute it with water for a washed, translucent effect. You can mix colors together, layer them while damp, or let coats dry and build up intensity. For a table top, that means you can create everything from a subtle driftwood look to a loud, abstract statement piece without needing a full studio of specialty products.

Understanding the Product Before You Start

Unicorn SPiT is often described as a gel stain and paint hybrid. It is water-based, low-odor compared to many solvent finishes, and clean-up is easier while it is still wet. It bonds best to porous surfaces such as raw wood, sanded MDF, and properly prepared furniture. On non-porous surfaces like glass, metal, or laminate, adhesion can be unpredictable unless you use a bonding primer or an appropriate prep method.

a wooden table with multicolored paint on it in a storeroom next to bookshelves
a wooden table with multicolored paint on it in a storeroom next to bookshelves
Busted to Beautiful: a UNICORN SPiT Table Transformation!
Busted to Beautiful: a UNICORN SPiT Table Transformation!
Unicorn SPiT Concentrated Gel Stain
Unicorn SPiT Concentrated Gel Stain

It is also important to know that Unicorn SPiT does not replace a sealer. Once the color is dry, it can still be vulnerable to water, abrasion, and heat. A table top needs a protective layer over the color, whether that is a water-based polyurethane, an oil-based topcoat, or a pour-on epoxy resin. Always test your chosen topcoat on a sample board first to check for compatibility and color shift.

Choosing the Right Table and Surface

The best candidates for a Unicorn SPiT table top are raw wood, previously stained wood that has been sanded back, and MDF with a sealed edge. Wood accepts the gel stain unevenly in a good way, highlighting grain and creating natural variation. If the table has an existing polyurethane or lacquer finish, you usually need to sand it dull or strip it so the color has something to grab.

AD

Think about how the table will be used before you choose your sealer. A decorative console table might only need a few coats of water-based polyurethane. A dining table or coffee table that sees daily snacks, crafts, and hot mugs will need a more robust system, such as several coats of a hard-wearing polyurethane or a bar-top epoxy. The more abuse the surface will take, the more serious the topcoat should be.

Unicorn spit
Unicorn spit
Unicorn Spit
Unicorn Spit
Mariposa Sparkling Red Rainbow flower coffee table unicorn spit diy
Mariposa Sparkling Red Rainbow flower coffee table unicorn spit diy
Unicorn spit table
Unicorn spit table
Sombrero Table
Sombrero Table
an abstract painting is displayed on the wall
an abstract painting is displayed on the wall

Step-by-Step Application for a Unicorn SPiT Table Top

Applying Unicorn SPiT to a table top is part prep, part color play, and part patience. The process starts long before the first drop of color hits the wood. You need a clean, dust-free surface, a clear idea of the look you want, and a test board to practice blending and sealing. Rushing the prep or the cure time is the fastest way to end up with peeling, tackiness, or a muddy design.

A simple workflow is to prep the surface, apply the color in thin layers, let it dry completely, seal it with a compatible topcoat, and then allow the full cure time before putting the table back into service. Each step matters, but the drying and curing stages are especially important because Unicorn SPiT and many topcoats need time to harden beyond simply feeling dry to the touch.

AD

Surface Prep and Base Coating

Start by sanding the table top with a progression that ends around 220-grit. Remove dust with a vacuum and a damp cloth, then let it dry completely. Tape off edges if you want a clean border, and consider a stain-blocking primer or shellac if you are working over a surface that might bleed through, such as certain woods with strong tannins or an old finish with unknown stains.

Unicorn SPiT Concentrated Gel Stain on X
Unicorn SPiT Concentrated Gel Stain on X
a coffee table made out of wood and painted with multicolored paint on it
a coffee table made out of wood and painted with multicolored paint on it

For a base coat, you can apply Unicorn SPiT directly or dilute it with water for a lighter wash. Work in small sections so the gel does not dry before you can blend it. If you want more control, mist the surface lightly with water to keep the color movable. Let the base coat dry thoroughly before adding more layers, and keep a test board nearby to confirm how the colors interact.

Layering Color and Creating Effects

Layering is where a Unicorn SPiT table top becomes distinctive. Try dry brushing for a weathered look, sponging for soft clouds, or spritzing with water to create drips and blooms. You can use a resist technique with painter's tape or stencils, wipe back areas with a damp rag, or drag a stiff brush through wet color to mimic wood grain. The key is to build slowly and stop before the colors turn muddy.

AD

Once the color design is complete, let it dry for at least 24 hours, though thicker applications may need longer. If the surface feels cool, tacky, or lifts color when lightly touched, it is not ready for sealer. A very light sanding with a fine-grit pad can smooth minor ridges, but be gentle because aggressive sanding can remove the design. Wipe away all dust before moving to the topcoat.

Topcoating and Curing for Durability

Choosing a topcoat is the most important decision for a usable table top. Water-based polyurethane is popular because it is easy to apply, dries clear, and has less odor. Oil-based polyurethane can add a warm amber tone and offers strong durability, but it needs good ventilation and longer dry times. Pour-on epoxy creates a thick, glass-like surface that is excellent for bar tops and heavy-use tables, but it requires precise mixing and a dust-free curing space.

Apply the topcoat according to the manufacturer's directions, usually in several thin coats rather than one thick coat. Lightly sand between coats if the product allows it, and clean away dust before the next layer. After the final coat, resist the urge to use the table immediately. Many finishes need several days to a week to cure fully, and epoxy may need even longer. Once cured, the Unicorn SPiT table top can handle normal household use with reasonable care.

Design Ideas and Common Mistakes

Part of the appeal of a Unicorn SPiT table top is that it can fit almost any style, from modern and geometric to farmhouse and whimsical. The same product can create a soft, whitewashed pine look or a deep, jewel-toned abstract surface. The design possibilities are wide, but the most successful projects usually share a few traits: a clear color palette, intentional layering, and a durable sealer.

Common mistakes tend to revolve around impatience. People apply the color too thickly, seal before the stain is fully dry, or use a topcoat that does not agree with the water-based color. Others skip the test board and end up with unexpected color shifts or adhesion problems. Avoiding these pitfalls is mostly about slowing down and treating the table top as a finish that needs time to build and cure.

Popular Unicorn SPiT Table Top Designs

Ocean-inspired designs are a natural fit because blues, greens, and whites blend beautifully into waves and foam. Galaxy themes use deep purples, blacks, and metallic accents to create a cosmic look that works well on coffee tables and gaming tables. Geometric patterns with crisp tape lines offer a more modern feel, while a simple wood-grain highlight can enhance the natural character of oak, pine, or ash without covering it completely.

For a farmhouse or boho table, try diluted browns, grays, and soft whites to create a weathered, aged finish. For a bold statement, use saturated jewel tones and abstract sweeps that encourage conversation. The table's setting should guide the palette. A bright playroom table can handle rainbow layers, while a formal dining room may call for deeper, more restrained colors sealed under a satin topcoat.

Troubleshooting and Maintenance

If the color remains tacky after drying, the application was likely too thick or the humidity was too high. Increase airflow, wait longer, and avoid adding sealer until the surface is completely dry. If the topcoat fisheyes, bubbles, or peels, the surface may have been contaminated with oil, dust, or incompatible product. If color bleeds through a light topcoat, a stain-blocking sealer or additional clear coats may be needed.

For everyday maintenance, wipe the table with a soft, damp cloth and mild soap. Avoid ammonia-based cleaners, abrasive scrubbing pads, and standing water. Use coasters under drinks and trivets under hot dishes, even if the table has a strong topcoat. If the finish eventually shows wear, a light sanding and a fresh coat of compatible topcoat can restore the surface without stripping the original Unicorn SPiT design.

A Unicorn SPiT table top rewards curiosity, but it also asks for respect for the finishing process. Choose your colors with the room in mind, test your topcoat before committing, and give every layer the time it needs to dry and cure. With that approach, an ordinary table can become a durable, one-of-a-kind centerpiece that invites people to look closer and ask how you did it.

AD