tobin sports inflatable boat floor replacement

Tobin Sports Inflatable Boat Floor Replacement

By Andrew Taylor
AD

Have you recently purchased a Tobin sports inflatable boat, only to find that the floor is damaged or worn out? Don't despair, for you're not alone. Inflatable boats, while durable, can undergo considerable wear and tear. Replacing the floor, however, need not be a daunting task. Let's explore the process of Tobin sports inflatable boat floor replacement, equipping you with the knowledge to tackle this DIY project with confidence.

Before we delve into the specifics, it's crucial to understand why this task is best left to the home enthusiast. Namely, replacing the floor can save you significant money while giving you the satisfaction of having done the work yourself. Additionally, it's an opportunity to intimately familiarize yourself with your boat's construction.

Assessing the Damage

Before you begin, carefully inspect the damage to ensure the floor is the only part that needs replacing. If you find other issues, you may want to tackle them at the same time for a seamless repair process.

AD
Inflatable Boat Floorboard & Seat
Inflatable Boat Floorboard & Seat
Intex Excursion 5 (Part 5) - Floor Modifications DIY
Intex Excursion 5 (Part 5) - Floor Modifications DIY
Inflatable Boat Floorboard & Seat
Inflatable Boat Floorboard & Seat

The most common issues requiring floor replacement in Tobin sports inflatable boats are punctures, tears, or excessive wear. Irrespective of the cause, these problems can lead to discomfort and potential safety hazards while out on the water. Therefore, it's essential to address them promptly.

Gathering the Right Materials

Once you've determined that the floor alone needs replacing, gather the necessary tools and materials. You'll need a replacement floor (usually made of Hypalon or PVC), a utility knife, a scissors or shears, a solvent-based adhesive (like the one used during the boat's original construction), a brush for applying the adhesive, and sandpaper or a rasp for roughing up the surfaces.

Floor Installation Instructions
Floor Installation Instructions
an inflatable boat is sitting on the grass
an inflatable boat is sitting on the grass
SB-310 Wood Floor Inflatable Boat Replacement Floorboard, #2 Second Floorboard Piece
SB-310 Wood Floor Inflatable Boat Replacement Floorboard, #2 Second Floorboard Piece

Ensure you purchase a floor that matches your boat's exact dimensions. Measure the floor from end to end and side to side to avoid any disappointing misfits. Also, consider Stickafloor, a popular choice among Tobin sports inflatable boat owners due to its easy application and durability.

Removing the Old Floor

First, deflate your boat and remove it from any water. Ensure the area where you'll be working is well-ventilated and free from any obstacles.

AD

Next, carefully cut away the old floor from the boat's body using a utility knife or shears. Be cautious not to damage the sides of the boat in the process. Once detached, thoroughly clean both the old floor and the area where it had been attached using soap and water to remove all traces of the old adhesive and any dirt.

Aluminum Floor vs Inflatable Floor
Aluminum Floor vs Inflatable Floor
Repairing your inflatable boat now as easy as painting - just apply revolutionary two-stage Tuff-Coat Inflatable Boat Repair Kit to any damaged Hypalon or PVC surface
Repairing your inflatable boat now as easy as painting - just apply revolutionary two-stage Tuff-Coat Inflatable Boat Repair Kit to any damaged Hypalon or PVC surface
an inflatable boat is tied to the dock
an inflatable boat is tied to the dock
Intex Excursion 5 Floor Mod With Floor Plan
Intex Excursion 5 Floor Mod With Floor Plan
SB-310 Wood Floor Inflatable Boat Replacement Floorboard, #4 Stern Floorboard Piece
SB-310 Wood Floor Inflatable Boat Replacement Floorboard, #4 Stern Floorboard Piece

Preparing the Surfaces

Inspect the boat's body where the old floor had been attached. Use sandpaper or a rasp to roughen the surface, ensuring better adhesion for the new floor. Make sure to remove any sandpaper residue or dust.

Similarly, roughen the backside of the new floor using the same method. This step ensures that the adhesive bonds effectively with both surfaces, preventing any future separations.

AD

Attaching the New Floor

Begin by applying the solvent-based adhesive to the backside of the new floor using a brush. Ensure the adhesive is evenly spread across the entire surface, avoiding any puddles that might cause uneven adhesion.

Wait for the adhesive to become tacky, then slowly and carefully place the new floor onto the prepared surface of the boat's body. Start from one end and gradually work your way to the other, ensuring the floor is evenly aligned and forms a smooth, wrinkle-free surface.

Finishing Touches

Once the new floor is in place, use a soft, dry cloth to wipe away any excess adhesive that may have seeped out from the sides. Again, ensure the area is well-ventilated as you do this to avoid inhaling harmful fumes.

AD

Allow the adhesive to cure according to the manufacturer's instructions, usually around 24-48 hours. Be gentle with your boat during this period, avoiding any unnecessary pressure on the newly attached floor.

After the floor has fully bonded, you're now ready to inflate your Tobin sports inflatable boat and head back out onto the water. Your prompt attention to the floor's replacement ensures a comfortable and safe boating experience for you and your passengers. Regular inspections and timely maintenance will safeguard your boat's longevity and performance.

AD