Tarp Like a Fitted Sheet: Easy & Secure Coverage
Ever found yourself struggling to set up a tarp in the backcountry, wishing you could just use it like a fitted sheet? You're not alone. Many campers and hikers have grappled with the same challenge. But what if we told you, it's actually possible? With the right techniques, you can indeed "tarp like a fitted sheet". Let's explore how.
The first step is understanding your tarp's dimensions and your tent's footprint. Just like with a fitted sheet, you need to match the size for a perfect fit.
Preparing Your Tarp and Tent
Before you start, ensure your tarp is clean and dry. This not only makes it easier to work with but also extends its lifespan.



Next, lay out your tent on a flat surface. This will be your working area. It's much easier to figure out how your tarp should look on flat ground than in the wild.
Measuring Your Tarp and Tent
Measure both the length and width of your tent's footprint. This is the area that needs to be covered by your tarp. Make sure to note which side is wider and which is longer.



Do the same for your tarp. Tarsps typically come in rectangular shapes, but you might have an oddly shaped one. If so, measure the longest and widest points.
Matching Tarp to Tent Size
Now, match your tarp's measurements to your tent's. You want the tarp to be at least as large as your tent's footprint, if not a bit larger to provide additional coverage. But remember, the larger the tarp, the heavier it is to carry.
Some campers prefer a Exact Fit, while others opt for an Overhang. Both methods have their pros and cons, and we'll discuss them later.






Setting Up Your Tarp
Once you've matched your tarp to your tent, it's time to set it up. The process is quite similar to how you'd set up a fitted sheet on your bed.
Start by positioning your tent where you want it. If you're using trekking poles or a dedicated tarp tent, set those up first.
Positioning the Tarp
Lay your tarp flat on the ground. If your tarp is larger than your tent, make sure the wider side is parallel to your tent's wider side. This will ensure maximum coverage.

Next, align the edges of your tarp with the edges of your tent. You want the tarp to extend slightly past the tent on all sides, providing a buffer against rain and wind.
Securing the Tarp
Now, it's time to secure the tarp. Use sturdy guylines or tie it directly to your tent's guylines. Make sure it's taut but not so tight that it pulls on the tent.
Use stakes to secure the edges of the tarp to the ground. This will prevent it from flapping around in the wind. Make sure the stakes are secure and won't snap in high winds.
And there you have it! You've just learned how to tarp like a fitted sheet. Camping should now be a little easier and a lot more comfortable.





