stock tank pool pump diy

Stock Tank Pool Pump DIY: Setup & Maintenance Tips

By David Brown
AD

If you're looking to cool off this summer without breaking the bank, consider setting up a stock tank pool. Not only are these above-ground pools affordable and easy to install, but they also add a touch of rustic charm to your backyard. To keep your stock tank pool water clear and fresh, you'll need a reliable pump. In this DIY guide, we'll walk you through the process of choosing, installing, and maintaining a pump for your stock tank pool. Let's dive in!

Before we begin, it's important to note that stock tank pools, also known as stock tank pools, are smaller and shallower than traditional in-ground or above-ground pools. Therefore, they require specific pumps designed for their size and depth. Read on to learn more about selecting the right pump for your stock tank pool.

Choosing the Right Pump for Your Stock Tank Pool

When selecting a pump for your stock tank pool, there are several factors to consider, including flow rate, horsepower, and pump type.

AD
Part Three: DIY Stock Tank Pool — Pool Pump, Accessories, & Set-up
Part Three: DIY Stock Tank Pool — Pool Pump, Accessories, & Set-up
How To Install Any Pump On Your Stock Tank Pool — Stock Tank Pool Authority
How To Install Any Pump On Your Stock Tank Pool — Stock Tank Pool Authority
there is a large metal tub in the yard with water running through it and an advertisement about how i built a custom 8ft cowboy pool for under $ 80
there is a large metal tub in the yard with water running through it and an advertisement about how i built a custom 8ft cowboy pool for under $ 80

Flow Rate

The flow rate, measured in gallons per minute (GPM), indicates how much water the pump can move in a given time. For stock tank pools, which typically range from 8 to 12 feet in diameter and 18 to 24 inches in depth, a flow rate of 1,000 to 1,500 GPM should suffice.

To determine the appropriate flow rate for your stock tank pool, you can use the following formula: (Pool volume x Turnover rate) / 60. The average turnover rate for a swimming pool is about once every 6 hours. However, for stock tank pools, a turnover rate of once every 12 hours should be sufficient, as these pools are smaller and used less frequently compared to traditional swimming pools.

Stock Tank Pool DIY Tutorial - The Sommer Home
Stock Tank Pool DIY Tutorial - The Sommer Home
Stock Tank Pool Deck Tutorial | Garrison Street Design Studio
Stock Tank Pool Deck Tutorial | Garrison Street Design Studio
How to Turn a Stock Tank into a Pool — The Wehner Home
How to Turn a Stock Tank into a Pool — The Wehner Home

Horsepower

Horsepower (HP) refers to a pump's ability to move water against resistance, which is determined by factors such as the pool's size, depth, and plumbing configuration. For stock tank pools, a single-speed pump with 0.5 to 1.0 HP should be adequate.

Single-speed pumps are the most common and affordable type of pool pumps. They run at a constant speed and are suitable for stock tank pools, as they do not require the same level of energy efficiency or circulation complexity as larger, in-ground pools.

AD

Pump Type: Discharge and Intake

Stock tank pools typically have one skimmer for suction and one return jet for water entry. This means that the pump you choose should have a single intake and a single discharge port. Make sure to select a pump that is compatible with your pool's skimmer and return system.

Building a Stock Tank Pool - Do's, Don'ts and FAQs
Building a Stock Tank Pool - Do's, Don'ts and FAQs
Stock Tank Pool
Stock Tank Pool
Easy DIY Backyard Stock Tank Pool Setup with Pump
Easy DIY Backyard Stock Tank Pool Setup with Pump
50 Brilliant Stock Tank Pool Setups
50 Brilliant Stock Tank Pool Setups
How to DIY an above-ground pool pump cover with a fake rock
How to DIY an above-ground pool pump cover with a fake rock
How to Build a Stock Tank Pool
How to Build a Stock Tank Pool

The pump should be installed in a way that ensures proper water flow, with the intake connected to the skimmer and the discharge connected to the return jet. Proper installation is crucial to maintain adequate water circulation and prevent airlocks or other pump issues.

Installing the Pump in Your Stock Tank Pool

Now that you've chosen the right pump for your stock tank pool, it's time to install it. The installation process is relatively straightforward and can be completed in a few steps:

AD

Gather Your Materials

Before you begin, make sure you have all the necessary materials and tools on hand, including:

How to setup a DIY Stock tank pool with liner - HandBuilt
How to setup a DIY Stock tank pool with liner - HandBuilt
  • Pool pump
  • Hose clamps
  • Hoses (suction and discharge)
  • Teflon tape or pipe dope
  • Adjustable wrench
  • Screwdriver
  • Tape measure

Connect the Pump to the Skimmer and Return Jet

1. Measure and cut the suction and discharge hoses to the appropriate lengths, ensuring they reach from the pump to the skimmer and return jet without being too long or too short.

2. Connect one end of the suction hose to the pump's intake and the other end to the skimmer. Wrap the hose connections with Teflon tape or pipe dope to create a tight seal and prevent leaks.

AD

3. Repeat the process for the discharge hose, connecting one end to the pump's discharge port and the other end to the return jet.

4. Secure the hoses to the pump and pool using hose clamps. Tighten the clamps with an adjustable wrench to ensure a stable connection.

Position and Mount the Pump

The pump should be positioned close to the pool's skimmer and return jet to minimize the length of the suction and discharge hoses. Once you've determined the best location for the pump, mount it using the provided hardware or secure it to a stable, level surface near the pool.

5. Connect the pump's power cord to a dedicatedGFCI (Ground Fault Circuit Interrupter) outlet, ensuring that the outlet is properly wired and protected. Always prioritize safety when working with electrical components.

6. Prime the pump by filling the intake and discharge pipes with water, then turn it on. The pump should create suction and draw water from the pool through the skimmer, filtering and circulating it before returning it to the pool through the return jet.

Congratulations! You've successfully installed a pump in your stock tank pool. Now, let's discuss how to maintain your pump system for optimal performance and longevity.

Maintaining Your Stock Tank Pool Pump

A well-maintained pump will not only extend its lifespan but also ensure crystal-clear water in your stock tank pool. Regular cleaning, management of chemicals, and periodic inspections are essential to keep your pump functioning at its best.

Regular Cleaning

A clean pump is a happy pump. To keep your pool pump running smoothly, follow these cleaning tips:

1. Monthly: Disassemble the pump and clean its impeller, strainer basket, and O-ring. Inspect these components for signs of wear, damage, or buildup, and replace them as needed.

2. Seasonally: Clean the pump's lid, housing, and filter system, removing any dirt, debris, or algae that has accumulated over time. A thorough cleaning at the beginning and end of the swimming season will ensure optimal performance and prolong the life of your pump.

Chemical Management

Balancing the chemicals in your stock tank pool is crucial to prevent damage to the pump and its components. Maintain proper pH, alkalinity, and sanitizer levels, and monitor them regularly to ensure they remain within acceptable ranges:

1. pH: Maintain a pH level between 7.2 and 7.6 for optimal water balance and clarity. Anything outside this range can cause staining, scaling, or corrosion of the pump's internal components.

2. Alkalinity: Keep total alkalinity between 80 and 120 parts per million (ppm) to buffer pH levels and prevent sudden shifts in pH.

3. Sanitizer: Maintain a consistent chlorine or alternative sanitizer level to prevent bacterial and algal growth, which can clog the pump and cause irreparable damage.

Periodic Inspections

Regularly inspect your pump for signs of wear, damage, or leaks. Look for loose fittings, cracks in the housing, orgren corrosion on metallic components. Address any issues promptly to prevent further damage and ensure optimal performance.

Additionally, monitor your pump's operation, listening for unusual noises or changes in water flow. If you notice anything out of the ordinary, shut down the pump and contact a professional pool technician for assistance.

Stock tank pools are an affordable and convenient way to enjoy the benefits of a swimming pool without the high cost and maintenance of a traditional in-ground pool. By selecting, installing, and maintaining the right pump for your stock tank pool, you can ensure clear, inviting water and a memorable swimming experience for years to come.

AD