speedaire 6x396 rear clevis mounting kit

Speedaire 6x396 Rear Clevis Mounting Kit – Durable & Exact Fit

By William Clark
AD

The Speedaire 6X396 rear clevis mounting kit is a small but critical hardware assembly for anyone mounting a compatible pneumatic cylinder in a pivot-style application. Instead of locking the cylinder body into a rigid position, this kit gives the rear end a controlled pivot point, allowing the cylinder to move through an arc as the rod extends and retracts.

For maintenance teams, OEM machine builders, and industrial buyers, understanding what this mounting kit does, how it installs, and how to confirm compatibility can prevent premature cylinder wear, rod misalignment, and costly downtime. The following guide covers the practical details behind the Speedaire 6x396 rear clevis mounting kit and its role in air cylinder mounting systems.

What the Speedaire 6X396 Rear Clevis Mounting Kit Does

In a pneumatic circuit, the cylinder must transfer force without fighting the machine structure. When a cylinder is bolted rigidly at both ends, even a small misalignment can create side loading on the piston rod, piston, and bore. A rear clevis mount solves this by anchoring the rear of the cylinder through a pivot pin, so the cylinder body can rotate slightly while the rod moves. The Speedaire 6X396 rear clevis mounting kit provides the bracket and pivot hardware needed to create that rear pivot point on compatible Speedaire cylinders.

AD
HyHaven U-Shaped Clevis Mounting Brackets for 6000N Linear Actuators (2-Pack)
HyHaven U-Shaped Clevis Mounting Brackets for 6000N Linear Actuators (2-Pack)
Replacement Small Clevis Pins for Gantry Cranes, 2PK
Replacement Small Clevis Pins for Gantry Cranes, 2PK
Clevis Rod Ends & Yoke Ends
Clevis Rod Ends & Yoke Ends

This kit is not simply a generic bracket. Rear clevis mounting kits are designed around specific cylinder mounting dimensions, pin diameters, and load ratings. The 6X396 kit is matched to particular Speedaire cylinder series or bore sizes, which means the user should always verify the cylinder model before ordering. When the correct kit is used, the rear clevis keeps the cylinder aligned through its stroke and helps the rod clevis, spherical eye, or other front mount move naturally with the application.

Pivot Mounting vs. Rigid Mounting

Rigid mounting is suitable for applications where the cylinder pushes in a perfectly straight line and the load is guided by external rails or bearings. However, many real-world machines have some degree of misalignment, thermal expansion, or arcing motion. In those cases, a pivot mount such as a rear clevis is the better choice because it allows the cylinder to self-align during operation. The Speedaire 6X396 rear clevis mounting kit is intended for exactly this kind of setup.

Uxcell Air Cylinder Rod Clevis End M12x1.25 Female Thread Y Connector, Silver
Uxcell Air Cylinder Rod Clevis End M12x1.25 Female Thread Y Connector, Silver
Fasteners Clevis Pin 5/16" x 1" 100/Bag
Fasteners Clevis Pin 5/16" x 1" 100/Bag
Clevis Fastener
Clevis Fastener

Consider a cylinder operating a hinged gate, a dump door, or a rotating clamp arm. The load moves in an arc, so the cylinder must also be allowed to pivot. If the rear of the cylinder is fixed solidly, the rod may bend, the seals may wear unevenly, and the machine may bind. By installing the rear clevis kit, the cylinder can follow the natural path of the mechanism, which extends service life and improves motion quality.

Key Components and Materials

Although the exact contents can vary by production run, a rear clevis mounting kit typically includes the clevis bracket, a pivot pin, retaining rings or cotter pins, and the fasteners needed to attach the bracket to the cylinder or machine frame. The components are usually made from steel or a comparable high-strength material and may be plated or coated for corrosion resistance. The Speedaire 6X396 kit follows this general format, with parts sized to work as a matched assembly.

AD

Material and finish matter in industrial environments. A zinc-plated or black-oxide finish can help resist moisture and mild chemicals, but harsh washdown or outdoor applications may require additional protection. The pivot pin and retaining hardware also need to be inspected for wear over time. Replacing a missing or bent pin with a hardware-store substitute can introduce play, accelerate wear, and compromise the cylinder's mounting geometry.

3/8 In. Clevis Pin
3/8 In. Clevis Pin
an aluminum pipe clamp is shown with the end section open and one end closed
an aluminum pipe clamp is shown with the end section open and one end closed
Clamp and Shimblock Assembly
Clamp and Shimblock Assembly
1 stks Beugel Voor Substructuur Cltb Gids As Ondersteuning Cltam Side Gemonteerde Strut Clip RCJ
1 stks Beugel Voor Substructuur Cltb Gids As Ondersteuning Cltam Side Gemonteerde Strut Clip RCJ
Clevis End #3 1-8RH 1-1/16 3/4 SC
Clevis End #3 1-8RH 1-1/16 3/4 SC
Clevis Pins
Clevis Pins

Installation, Compatibility, and Maintenance for the Speedaire 6X396 Rear Clevis Mounting Kit

Proper installation starts long before the first bolt is tightened. The technician should confirm that the cylinder is depressurized, the air supply is locked out, and all stored energy is released. After that, the cylinder model, bore size, and existing mounting style should be checked against the Speedaire 6X396 rear clevis mounting kit. A kit that looks similar but has the wrong pin diameter or mounting hole spacing can create a dangerous misalignment.

Once compatibility is confirmed, the rear clevis bracket is attached to the rear of the cylinder according to the manufacturer's instructions. The pivot pin is inserted through the bracket and cylinder mounting ears, then secured with the supplied retaining rings or pins. The bracket is then mounted to the machine frame so that the pivot axis is perpendicular to the cylinder stroke. Fasteners should be tightened to the specified torque, and the cylinder should be cycled slowly to check for binding, excessive play, or interference.

AD

Compatibility Checks Before You Buy

Before purchasing the Speedaire 6X396 rear clevis mounting kit, gather the cylinder's model number, bore size, and current mounting configuration. Speedaire offers multiple cylinder families and mounting options, and a rear clevis kit for one series may not fit another. The part number 6X396 should be cross-referenced with the cylinder documentation or a trusted supplier's compatibility chart. If the original kit is still on the machine, compare the old bracket's dimensions with the replacement.

HyHaven U-Shaped Clevis Mounting Brackets for 6000N Linear Actuators (2-Pack)
HyHaven U-Shaped Clevis Mounting Brackets for 6000N Linear Actuators (2-Pack)
several different types of metal parts on a white surface with screws, nuts and bolts
several different types of metal parts on a white surface with screws, nuts and bolts
CWB 06
CWB 06

Key dimensions to verify include the pin diameter, the width between the clevis ears, the mounting hole pattern, and the thread size or bolt size used to attach the bracket. It is also wise to confirm the kit's load capacity relative to the cylinder's thrust and the application's shock loads. When in doubt, contact the supplier with the complete cylinder nameplate information. A few minutes of verification can prevent a return, a stalled repair, or a damaged cylinder.

Maintenance and Troubleshooting

Rear clevis mounting kits are simple, but they still require periodic inspection. Check the pivot pin for wear, corrosion, or bending. Look for elongated holes in the clevis bracket, loose fasteners, and missing retaining rings. A small amount of grease on the pivot pin may be appropriate if the manufacturer allows it, but avoid contaminating the cylinder's air supply or seals. If the machine operates in a dirty environment, clean the pivot area and inspect it more frequently.

AD

Common symptoms of a worn or misaligned rear clevis include rod binding, uneven seal wear, noisy operation, and visible movement at the mounting bracket. If these signs appear, stop the machine and inspect the entire mounting system, not just the clevis kit. Sometimes the problem is a loose frame bracket, a bent rod, or a front mount that does not allow enough articulation. Replacing the Speedaire 6X396 rear clevis mounting kit with a new, correct unit can restore proper pivoting, but the root cause of the misalignment should also be corrected.

Keeping the right mounting hardware on hand is one of the simplest ways to reduce pneumatic maintenance delays. The Speedaire 6X396 rear clevis mounting kit may be a small component, but it plays a major role in alignment, wear reduction, and reliable motion. Verify the cylinder model, install the kit with care, and inspect it during routine service; that approach will help the cylinder run smoother and last longer in demanding industrial applications.

AD