"Easy Ribbon Bow Tutorial: Create Showstopper Wreath Bows in Minutes"
Add a touch of elegance to your wreath with a grand bow made from a simple ribbon. This simple yet stunning embellishment is not only cost-effective but also easy to make. In this step-by-step guide, we'll walk you through the process of creating a big bow out of ribbon for your wreath.
credit goes to unsplash
Gather Your Materials
Before you start, ensure you have all the necessary materials. Here's what you'll need:



- A wide ribbon, at least 2 inches (5 cm) wide
- Scissors
- A wreath (live, foam, or artificial)
- Hot glue gun and glue sticks (optional)
Measure Your Ribbon
Determine the length you want your bow to be. For a big, showy bow, you'll need plenty of ribbon. A good rule of thumb is to have about 8 times the length of the bow's height from the top of the wreath to the base of the bow. For example, if your wreath is 18 inches (45 cm) tall, you'll need around 144 inches (365 cm) of ribbon.
Tip: Measure and cut the ribbon at this stage, as it's easier to manage than a long, continuous loop.



Create the Bow's Base
Fold the ribbon in half to form a loop, with the two ends hanging loose. This loop will be the center of your bow.
credit goes to unsplash
Make the Bow's Loops
With your base loop in place, it's time to create the bow's loops. This step requires some practice, but with each loop, you'll get the hang of it.






Form the First Loop
Take both ends of the ribbon and bring them towards the center, crossing them over each other. This forms the first loop of your bow.
credit goes to unsplash
Create Additional Loops
Now, wrap each tail of the ribbon around the base of the loop, pulling it through to form another loop. Do this three or four times, depending on how full you want your bow to be.

credit goes to unsplash
Final Touches
After creating your loops, there are a few more steps to give your bow a polished look.
Tie the Bow
Once you're happy with the number of loops, it's time to tie the bow. Bring the two tails together and tie them in a knot, centering it beneath the loops.
credit goes to unsplash
Hide the Knot
To hide the knot, wrap a small piece of the same or contrasting ribbon around the tails where they meet the knot. Glue it in place for a secure hold.
credit goes to unsplash
Now that your bow is complete, it's time to attach it to your wreath. If you want a subtle look, simply weave the tails of the bow through the wreath and adjust the loops as needed. If you prefer a more secure hold, or want to add some sparkle to your wreath, hot glue the bow to the wreath before adding it.
Remember: Always ensure that your bow and wreath are compatible. Foam wreaths and live wreaths may require more-securing methods, while artificial wreaths can be more forgiving.
Creating a big bow from ribbon for your wreath is a fun and rewarding DIY project that you can personalize to match any style or occasion. With practice, you'll be creating stunning bows to add to your wreaths, gift packages, and more. So, grab your ribbon and get started today!


