Sears Weed Eaters: Best Models, Reviews & Buying Guide
Sears weed eaters hold a special place in the history of American lawn care. For decades, homeowners walked into Sears stores and walked out with a Craftsman string trimmer, a reliable machine that promised to tame overgrown fence lines, sidewalks, and flower beds. Even though Sears has dramatically changed as a retailer, thousands of those trimmers are still sitting in garages and sheds, waiting for another season of work. If you own one, or you are considering buying a used model, understanding what you have is the first step toward keeping it running.
Whether you call it a weed eater, a string trimmer, a line trimmer, or a brush cutter, the basic job is the same: spin a length of nylon line at high speed to cut grass and weeds in places a mower cannot reach. Sears sold gas, corded electric, and cordless versions under the Craftsman name, and many of those models share parts and service procedures with brands like Poulan, Weed Eater, and Ryobi. That overlap is good news for anyone searching for Sears weed eater parts, manuals, or repair advice.
Understanding Sears Weed Eater Models and Brand History
Sears did not manufacture most of the string trimmers it sold. Instead, the company relied on outside manufacturers to build machines that carried the Craftsman badge, and sometimes the Sears name directly. This means a Sears weed eater may actually be a Poulan, a Weed Eater, a Ryobi, or another brand under the plastic housing. The model number plate, usually located near the engine or on the handle, is the key to identifying exactly what you own and which parts will fit.
Older Craftsman gas trimmers often used a model number beginning with 358, which typically points to Poulan or Weed Eater heritage. Other prefixes can indicate different manufacturers. Once you know the model number, you can cross-reference it with parts diagrams, owner's manuals, and aftermarket suppliers. That small detail saves time, money, and frustration when you need a primer bulb, a carburetor gasket, or a replacement spool.
Gas-Powered Craftsman String Trimmers
Gas-powered Sears weed eaters were built for homeowners who wanted freedom from extension cords and enough power to handle thick weeds. Many models used a two-cycle engine that requires a precise mix of gasoline and two-cycle oil. Some later Craftsman models used a four-cycle engine, which runs on straight gasoline but still needs regular oil changes. Curved-shaft models are lighter and easier to maneuver, while straight-shaft models offer more reach and often accept edger or brush-cutter attachments.
Common complaints with aging gas trimmers include hard starting, rough idling, and stalling when the trigger is squeezed. Often the culprit is old fuel left in the tank over winter. Ethanol in modern gasoline can attract moisture and degrade fuel lines, primer bulbs, and carburetor diaphragms. Using fresh fuel, adding a stabilizer, and running the carburetor dry before storage can prevent many of these problems. If the trimmer has been sitting for years, a fuel system rebuild is usually the first repair to consider.
Electric and Cordless Sears Weed Eaters
Corded electric Sears weed eaters are lightweight, quiet, and simple to maintain. They start with the push of a button, produce no exhaust fumes, and require almost no engine maintenance. The main trade-off is the cord, which limits your range and can become a nuisance in large yards. For small lots, townhomes, and trimming around patios, a corded Craftsman trimmer can still be a practical choice. Replacement spools and bump-feed heads are usually easy to find online.
Cordless models from Sears and Craftsman use rechargeable battery packs, often in older 19.2-volt or newer 20-volt platforms. Battery age is the biggest factor in performance. If a cordless trimmer seems weak or runs for only a few minutes, the battery may be at the end of its life rather than the motor being bad. Storing batteries indoors, avoiding extreme heat, and using the correct charger can extend their useful life. When a battery is no longer available, some owners adapt by buying a newer trimmer bare tool and keeping the old one for parts.
Maintenance, Troubleshooting, and Parts for Sears Weed Eaters
Routine maintenance is what separates a trimmer that lasts two seasons from one that lasts fifteen. For gas models, check the air filter, spark plug, and fuel filter regularly. Clean the cooling fins on the engine so it does not overheat. Inspect the trimmer head, replace worn line, and make sure the shield is secure. For electric models, keep the vents clear, check the cord for cuts, and clean grass clippings from the motor housing. These small habits take only minutes but prevent major breakdowns.
When a Sears weed eater will not start, troubleshoot in a logical order. Confirm that the fuel is fresh and mixed correctly on two-cycle models. Check the spark plug for fouling or damage. Inspect the primer bulb for cracks and the fuel lines for stiffness or leaks. On electric models, test the outlet, extension cord, and trigger switch. If the trimmer starts but dies when tilted, the carburetor may need adjustment or cleaning. Many repair guides for Poulan, Weed Eater, and Craftsman trimmers apply directly to Sears-branded machines because of their shared manufacturing history.
Common Repairs and Replacement Parts
The most common repairs on Sears weed eaters involve the fuel system, the starter assembly, and the cutting head. Fuel lines become brittle and crack, causing air leaks that make the engine run lean or refuse to start. Primer bulbs crack and leak. Carburetor diaphragms stiffen over time. On the cutting end, bump-feed heads wear out, spools crack, and retaining caps go missing. Replacing these parts is usually straightforward with basic hand tools and a parts diagram.
Finding parts starts with the model number. Sears PartsDirect was once the go-to source, and it still lists many older Craftsman and Sears trimmer parts. Aftermarket sellers on sites like Amazon and eBay often carry compatible fuel line kits, primer bulbs, carburetor rebuild kits, and trimmer heads at lower prices. Local small-engine repair shops may have universal parts on hand and can also diagnose problems if you would rather not do the work yourself. Always compare the part number, not just the brand name, because visually similar parts can have different fittings.
Seasonal Storage and Safety
At the end of the cutting season, give your Sears weed eater a proper send-off. For gas models, drain the fuel tank and run the engine until it stops. Add a fuel stabilizer if you plan to keep fuel in the tank for a short period. Remove the spark plug, add a few drops of oil to the cylinder, and pull the starter rope slowly to distribute it. Clean the air filter, scrape grass from the shield, and store the trimmer in a dry place. Electric models should be cleaned, inspected for cord damage, and stored with the battery removed if possible.
Safety deserves the same attention as maintenance. Wear eye protection, long pants, and sturdy shoes when operating any string trimmer. Keep bystanders, pets, and children well away from the cutting area. Never remove the shield or use the trimmer without the proper guard. Do not operate a gas trimmer indoors or in a closed garage because of carbon monoxide risks. Before making repairs, disconnect the spark plug wire or unplug the electric cord. These habits protect you and help the machine perform the way it was designed.
If you have an older Sears weed eater tucked away in the corner of your garage, it is worth a second look before you replace it. A little fuel system care, a new spark plug, and a fresh spool of line can bring many of these machines back to life for another season. Check the model number, find a reliable parts source, and treat the trimmer to the maintenance it has been missing. With a bit of attention, that familiar Craftsman orange and black can keep your lawn edges sharp and your weekend workload lighter.