RV Gray Water Hose Connection: Easy Tips & Best Practices
Hooking up an RV grey water hose connection might seem daunting, but with a little know-how, it's a breeze. Properly connecting your grey water hose ensures that wastewater from your sink, shower, and toilet drains safely, keeping your campsite clean and your RV in good condition.
Before you get started, make sure you have the right equipment. You'll need an RV sewer hose kit, which includes a sewer hose, a sewer Donut (also known as a sewer dump protector), and elbow adapters. You'll also need a level to ensure your RV is EXITING water from the tank, not INTAKING it.
Choosing the Right Sewer Hose
The length and diameter of your sewer hose are crucial for a smooth connection. Most RVs have a 3-inch bayonet connection, so a 3-inch sewer hose is typically the best choice. As for length, a 10 to 15-foot hose works well for most situations, but you may need a longer one if your sewer drain is far from your RV.



Once you've chosen the right hose, it's time to connect it to your RV's sewer outlet. At the RV end, you'll find a cap. Remove it and attach the sewer hose, ensuring it's securely fastened to prevent leaks.
Using Sewer Elbow Adapters
If your RV's sewer outlet doesn't match the hose's diameter, you'll need elbow adapters. These handy tools allow you to connect different sized hoses to your RV. Simply attach the adapter to the end of your sewer hose and connect it to your RV's sewer outlet.



When using elbow adapters, ensure they're properly sealed to prevent leaks. You can use Teflon tape or a fitting grease to create a tight seal.
Attaching the Sewer Donut
The Sewer Donut is a circular piece of RV sewer equipment that fits over your RV's sewer outlet. It helps to stabilize the sewer hose and prevents it from pulling off or popping off during use. Attach the Donut to your RV's outlet before connecting your sewer hose.
Make sure the Donut is firmly in place and that the sewer hose is fully inserted into the Donut's opening. This ensures a secure connection and prevents leaks.





Connecting to the Sewer Drain
Now that you've connected your sewer hose to your RV, it's time to connect the other end to the sewer drain at your campsite. First, locate the sewer drain and make sure it's accessible. If it's buried, you may need to dig it out.
Once you've found the drain, insert the end of your sewer hose into it. The hose should fit snugly, with no gaps. If there's a lot of play, you may need to use a sewer drain adapter to create a better fit.
Securing the Connection
To prevent the sewer hose from popping off during use, secure it to the sewer drain using a sewer hose support. This can be as simple as a piece of PVC pipe or a commercial sewer hose support bracket. Make sure the support is sturdy and will hold the hose in place even if there's a lot of wastewater flowing.
You can also use RV sewer hose locks or a sewer hose connector with a locking mechanism to further secure the connection. These tools help to prevent accidental disconnections and leaks.
Leveling Your RV
Before you start draining your tanks, make sure your RV is level. A slight slope towards your sewer outlet will ensure that water drains quickly and completely. If your RV isn't level, adjust the jacks or use leveling blocks until it is.
You can also use a water tank level indicator to ensure your tanks are being emptied completely. This tool helps to prevent overfilling and makes it easier to monitor your tank levels.
Once you've leveled your RV and secured your sewer hose, you're ready to start draining your tanks. Always remember to keep the sewer drain open to prevent backups, and never pour anything besides wastewater down the drain. With these tips in mind, you're well on your way to safe and efficient RV grey water disposal.





