root locus examples

Root Locus Examples: Easy Step-by-Step Guide with Solved Problems

By Hannah White
AD

Root locus examples are one of the fastest ways to connect a control system transfer function to the actual movement of closed-loop poles. When you vary a gain K from zero to infinity, the root locus shows where the characteristic equation 1 plus K G(s)H(s) equals zero sends the system's poles. Instead of solving that equation repeatedly, you read the plot, identify branches, asymptotes, breakaway points, and imaginary-axis crossings, and then decide how the system will respond.

Good examples matter because root locus sketching rules are easy to memorize but hard to trust until you see them operate on real transfer functions. A second-order plant reveals the basic real-axis and breakaway behavior. A third-order plant adds asymptotes and a stability limit. A zero shows how compensation can pull the locus left. Software verification then confirms the hand sketch and turns the technique into a practical design habit.

Foundational Root Locus Examples

Start with the standard open-loop form L(s) = K G(s)H(s). The closed-loop characteristic equation is 1 plus L(s) equals zero. Every branch begins at an open-loop pole when K is zero and ends at an open-loop zero, or at infinity, as K grows without bound. The number of branches equals the number of open-loop poles, and the real-axis rule says a point belongs to the locus when the count of real poles and zeros to its right is odd.

AD
Control Systems/Root Locus - Wikibooks, open books for an open world
Control Systems/Root Locus - Wikibooks, open books for an open world
ROOT LOCUS ANALYSIS
ROOT LOCUS ANALYSIS
a block diagram with the symbols for root locus method and an explanation to its functions
a block diagram with the symbols for root locus method and an explanation to its functions

These foundational root locus examples use simple plants so the algebra stays visible. You can calculate the characteristic polynomial, find breakaway points by setting the derivative of K with respect to s to zero, and check stability with the Routh-Hurwitz test. That combination builds intuition before you rely on a computer-generated plot.

Example 1: Second-Order Plant with Two Real Poles

Let G(s)H(s) = K divided by s(s+2). The characteristic equation is s^2 + 2s + K = 0. The open-loop poles sit at s = 0 and s = -2. With no finite zeros, both branches start on the real axis and move toward each other as K increases. The real-axis segment between 0 and -2 is part of the locus because a test point in that interval has one pole to its right.

the diagram shows how to draw root locuss in automattic control systems,
the diagram shows how to draw root locuss in automattic control systems,
Root, Base, and Stem in Morphology: Meaning and Examples
Root, Base, and Stem in Morphology: Meaning and Examples
a drawing of a plant with its roots exposed
a drawing of a plant with its roots exposed

The breakaway point occurs where the branches meet and split. Write K = -s(s+2), then take dK/ds = -2s - 2 and set it to zero. The solution is s = -1, and substituting back gives K = 1. For K less than 1, the closed-loop poles are real and negative. For K greater than 1, they become a complex-conjugate pair with real part -1, so the system remains stable for all positive K while damping decreases as gain rises.

Example 2: Third-Order System with Asymptotes

Now consider G(s)H(s) = K divided by s(s+2)(s+4). This plant has three poles at 0, -2, and -4, and no finite zeros. Three branches travel to infinity, so the locus has asymptotes. The asymptote angles are 60 degrees, 180 degrees, and 300 degrees. The centroid is the sum of poles minus the sum of zeros divided by the pole-zero difference, which gives negative 2. The real-axis segments are from negative infinity to -4 and from -2 to 0.

AD

The characteristic equation is s^3 + 6s^2 + 8s + K = 0. Differentiating K = -(s^3 + 6s^2 + 8s) and setting the derivative to zero gives 3s^2 + 12s + 8 = 0. The valid breakaway point is approximately s = -0.845, with K about 3.08. A Routh array shows that the system is stable for K between 0 and 48, and at K = 48 the locus crosses the imaginary axis at approximately plus or minus j2.828. This example captures a complete stability story from a single root locus plot.

Product of Roots Formula Explained | Easy Quadratic Equations Algebra Guide
Product of Roots Formula Explained | Easy Quadratic Equations Algebra Guide
Nyquist Stability Criterion - Examples and MATLAB Coding
Nyquist Stability Criterion - Examples and MATLAB Coding
different types of root systems in the soil
different types of root systems in the soil
a drawing of a tree with roots and the height of it's root area
a drawing of a tree with roots and the height of it's root area
a blackboard with the words root locus and why root locus is written on it
a blackboard with the words root locus and why root locus is written on it
Evolution of the Brassica self-incompatibility locus: A look into S-locus gene polymorphisms | PNAS
Evolution of the Brassica self-incompatibility locus: A look into S-locus gene polymorphisms | PNAS

Advanced Root Locus Examples with Zeros and Controller Design

Zeros change the root locus in ways that are central to controller design. A zero attracts branches, shifts the centroid, and can reduce the number of asymptotes. That is why lead compensators, PD controllers, and PI controllers all introduce zeros or poles that reshape the locus. The goal is usually to move closed-loop poles into a region with acceptable damping and settling time while preserving steady-state accuracy.

Advanced root locus examples also show the limits of hand sketching. Once a zero is added, the characteristic polynomial becomes more complicated and breakaway calculations can produce extra roots that are not on the locus. Software tools such as MATLAB and Python are useful here, but they are most valuable after you have predicted the general shape and checked the rules yourself.

AD

Example 3: Adding a Zero to Reshape the Locus

Take the previous third-order plant and add a zero at s = -1. The new open-loop function is G(s)H(s) = K(s+1) divided by s(s+2)(s+4). There are still three poles, but now there is one finite zero, so only two branches go to infinity. The asymptote angles become plus or minus 90 degrees, and the centroid moves to negative 2.5. The real-axis locus changes to the intervals from -4 to -2 and from -1 to 0.

a black and yellow poster with the words root locus sketching
a black and yellow poster with the words root locus sketching
a poster with different types of words and pictures on it, including the word list
a poster with different types of words and pictures on it, including the word list
an image of a red and white room with the words lett written in it
an image of a red and white room with the words lett written in it
Fibrous Root Diagram | Structure, Features & Functions Infographic
Fibrous Root Diagram | Structure, Features & Functions Infographic

The characteristic equation becomes s^3 + 6s^2 + (8+K)s + K = 0. A Routh array gives a first-column term of (48 + 5K) divided by 6, which is positive for all K greater than zero. Unlike the uncompensated third-order plant, this zero-stabilized system has no finite gain limit. The zero pulls the branches left and keeps the closed-loop poles in the stable region, illustrating why a well-placed zero is such a powerful design tool.

Example 4: PI Controller Tuning and Software Verification

Consider a plant G(s) = 1 divided by (s+1)(s+3) and a PI controller C(s) = Kp + Ki/s. Rewrite the controller as K(s+z)/s, where z = Ki/Kp. The open-loop function becomes L(s) = K(s+z) divided by s(s+1)(s+3). The PI controller eliminates steady-state error, but its pole at the origin adds a branch that can reduce stability margin. The zero at -z must be placed to bend the locus toward the left half-plane.

AD

Use software to verify the sketch. In MATLAB, define s = tf('s'), G = 1/((s+1)*(s+3)), and L = (s+z)/ (s*(s+1)*(s+3)); then call rlocus(L) for different z values. In Python, the control package offers root_locus for the same transfer function. Compare the breakaway points, asymptotes, and gain margins. A zero near -0.5 often gives better damping than a zero near -0.1, but the final choice depends on overshoot, settling time, and actuator limits.

Pick one of these transfer functions and sketch its root locus by hand before opening any software. Mark the poles, zeros, real-axis segments, asymptotes, and likely breakaway points. Then run the same case in MATLAB or Python and compare the result. The gap between your first sketch and the computed plot is where the real learning happens, and closing that gap once will make root locus a design tool you reach for rather than a procedure you memorize.

AD