ring camera mounting instructions

Ring Camera Mounting Guide: Step-by-Step Instructions

By Emily King
AD

Enhancing your home security system with a Ring camera delivers peace of mind, but proper mounting is crucial to maximize its potential. This guide walks you through the process, ensuring a secure and optimal installation.

Before we dive into the specifics, here's what you'll need: your Ring camera, a drill (if needed), a screwdriver, a level, and the mounting hardware that came with your device.

Mounting a Ring Camera Indoors

Indoor installations are straightforward and require minimal tools. Here are two common methods:

AD
How To Setup Ring Camera?
How To Setup Ring Camera?
How To Mount Ring Camera On Stucco – Storables
How To Mount Ring Camera On Stucco – Storables
Ring Spotlight Camera Install and Setup | FixThisBuildThat
Ring Spotlight Camera Install and Setup | FixThisBuildThat

Desktop or Shelf Mount

For this method, you'll use the provided stand and a small screwdriver. Place your Ring camera on a level surface, then use the stand to adjust the viewing angle. Secure the stand using the provided screw.

Remember, the ideal height for indoor cameras is between 4 to 6 feet, ensuring it captures the entire room and avoids obstructed views.

a woman using an outdoor camera on the side of a house with text overlay that reads, install smart outdoor cam
a woman using an outdoor camera on the side of a house with text overlay that reads, install smart outdoor cam
Ring Outdoor Camera Battery (Stick Up Cam)
Ring Outdoor Camera Battery (Stick Up Cam)
EASY Ring Camera System Install - No Drilling In Your Home!
EASY Ring Camera System Install - No Drilling In Your Home!

Mounting on a Wall

First, use a level to mark where you want the camera to be placed. Ensure it's 4 to 6 feet off the ground and in direct view of the area you want to monitor.

Drill pilot holes (if necessary) and attach the mounting bracket using the provided screws. Connect the camera to the bracket, ensuring it's secure and level.

AD

Mounting a Ring Camera Outdoors

Outdoor installations require weatherproofing and additional tools:

Ring Camera Placement Guide: Best Locations to Place
Ring Camera Placement Guide: Best Locations to Place
How To Setup Ring Floodlight Camera | +1–888–937–0088
How To Setup Ring Floodlight Camera | +1–888–937–0088
Ring Floodlight Cam Hack - Mounting Horizontal Under An Eave or Overhang
Ring Floodlight Cam Hack - Mounting Horizontal Under An Eave or Overhang
Your Ring Doorbell Has a Huge Blind Spot
Your Ring Doorbell Has a Huge Blind Spot
Mount Ring Camera on a wall (Best Way) 4K
Mount Ring Camera on a wall (Best Way) 4K
How to Rotate Outdoor Ring Camera
How to Rotate Outdoor Ring Camera

Installing on Siding or Wood

Measure and mark the location, ensuring it's 4 to 6 feet off the ground and captures the desired view. Drill a hole slightly smaller than your screw's diameter.

Attach the mounting bracket using the provided screws. Connect your Ring camera to the bracket, making sure it's secure and level. Finish by securing the camera with the provided screw or lag bolt.

AD

Installing on Brick, Concrete, or Stucco

You'll need a masonry drill bit and appropriate screws for this installation. Follow the same process as above, but adapt the drilling and screw diameter to your surface's material.

Once mounted, test your camera's view, connectivity, and motion notifications to ensure everything is working correctly.

As a final thought, consider occasional cleaning and recalibration to keep your Ring camera performing at its best, delivering the ultimate in home security. Always consult Ring's official support resources for model-specific instructions.

AD
AD