REAPER Debreathing Plugin: Instantly Remove Breath Sounds from Vocals
If you record vocals in REAPER, you have probably heard a loud inhale right before a verse or a sharp exhale after a big note. A reaper debreathing plugin or a well-built stock-plugin chain can reduce those sounds without flattening the performance. The goal is not to erase every breath, but to keep them from pulling focus away from the lyric or vocal tone.
REAPER does not ship with a single tool called “DeBreath,” but it gives you several ways to get there: ReaGate, ReaFIR, ReaXcomp, item automation, and full support for third-party VST/VST3 debreathing plugins. The best approach depends on whether you are editing a pop vocal, a podcast, a voiceover, or a delicate acoustic ballad.
Understanding Debreathing in REAPER
Debreathing is the process of reducing breath noises in a vocal or spoken-word recording. It can mean attenuating inhales, softening exhales, or removing lip smacks and mouth clicks that sit near a breath. In REAPER, you can do this manually, with stock plugins, or with a dedicated debreathing plugin.
Breaths are not automatically bad. In many performances, a quiet inhale adds realism and emotional pacing. The problem starts when a breath is louder than the phrase that follows it, or when multiple breaths stack up in a dense mix. Successful debreathing preserves the human element while removing the distraction.
Why Breath Removal Matters for Clean Vocals
A loud breath can compete with consonants, muddy a quiet verse, and make a vocal feel less controlled. In genres like pop, hip-hop, EDM, and modern rock, vocals are often compressed and bright, so breath noise becomes even more exposed. A reaper debreathing plugin helps you tame those moments before the final mix.
For podcasts and voiceover work, breath control is just as important. Listeners may tolerate natural breathing, but heavy inhales can sound unprofessional, especially when headphones are involved. The right amount of reduction keeps the voice smooth without making the speaker sound robotic.
Native REAPER Tools vs Third-Party Plugins
REAPER’s stock plugins are flexible enough to handle many debreathing tasks. ReaGate can attenuate quiet breath sounds between phrases, ReaFIR can subtract a learned breath profile, and ReaXcomp can control high-frequency breath energy. These tools require more setup, but they cost nothing and integrate tightly with REAPER’s routing.
Dedicated third-party plugins are faster because they detect breaths automatically. Waves DeBreath, Boz Digital Labs DeBreather, and iZotope RX’s Breath Control are common choices. They can be more transparent and less fiddly, but they also add cost and may still need manual automation for difficult passages.
Building a Debreathing Chain with REAPER Plugins
You can create a surprisingly effective debreathing chain using only REAPER’s built-in effects. The key is to target breath sounds selectively rather than processing the entire vocal with heavy compression or EQ. Start by listening to the raw track and marking where breaths cause the most problems.
A good chain often combines a gate or expander, a dynamic EQ-style tool, and manual volume automation. If the breaths are inconsistent, automation will be more transparent than a single static plugin setting. If the breaths are predictable and quiet, a gate or multiband compressor may be enough.
Using ReaGate for Breath Attenuation
ReaGate is useful when breaths happen during pauses or between vocal phrases. Set the threshold above the breath level but below the quietest sung or spoken note. When the vocal stops, the gate closes and reduces the breath; when the vocal resumes, the gate opens again.
Try a threshold around -35 dB to -25 dB, an attack of 1–5 ms, a release of 100–300 ms, and a hold of 20–50 ms. Use the sidechain filter to focus the detector on high frequencies, where breaths often live. Always check for chopped-off phrase endings, because an aggressive gate can cut natural vocal tails.
Spectral Subtraction with ReaFIR
ReaFIR’s Subtract mode can learn a noise profile and remove it from the signal. Select a section that contains only breath noise, enable the automatic noise profile build, and let REAPER analyze it. Then play the vocal and adjust the subtract amount until the breath softens.
This method can be very effective on steady breath noise, but it can also create artifacts if pushed too far. Use automation to bypass ReaFIR during sung or spoken phrases, and apply it only to breath-heavy sections. A little reduction often sounds better than complete removal.
Multiband Control with ReaXcomp
Breaths usually have energy in the 2–8 kHz range, with additional air around 10 kHz and above. ReaXcomp lets you compress or control those bands separately from the body of the vocal. Set a high-frequency band with a low threshold and a high ratio to catch breath spikes.
Be careful not to dull the vocal’s clarity. If the singer’s intelligibility drops, reduce the ratio or raise the threshold. You can also automate the band’s gain or threshold so it only works during breaths, which keeps the rest of the performance untouched.
Manual Automation and Take Envelopes
Manual editing is still the most transparent debreathing method in REAPER. Split the breath into its own item, then lower the item volume or draw a take volume envelope over the breath. This gives you sample-accurate control without relying on a plugin’s detection algorithm.
You can also use REAPER’s item volume handle, take envelopes, or a volume automation lane on the track. For long projects, create a shortcut for splitting and fading items to speed up the workflow. Manual debreathing is slower, but it often produces the most natural result.
Third-Party Debreathing Plugins That Work in REAPER
REAPER supports VST, VST3, AU, and JSFX plugins, so most dedicated debreathing tools can be inserted directly on a vocal track. Third-party plugins typically analyze the incoming signal and reduce breaths based on threshold, sensitivity, and attenuation controls. Some also offer separate breath and voice monitoring.
The best plugin for you depends on how much control you want. Simple tools are fast and musical, while advanced restoration suites offer deeper detection and cleanup. In all cases, use bypass comparisons and check the result in mono to make sure the vocal still sounds natural.
Waves DeBreath
Waves DeBreath is one of the best-known debreathing plugins. It separates breath sounds from voiced audio, then lets you reduce the breath level with a simple fader. You can solo the breath detection to hear exactly what the plugin is removing.
In REAPER, insert DeBreath as a VST3 on the vocal track. Start with moderate sensitivity and reduce breaths by 6–15 dB rather than muting them completely. Automate the plugin’s mix or bypass if a particular breath feels emotional and should stay audible.
Boz Digital Labs DeBreather
Boz Digital Labs DeBreather is a straightforward option with a clean interface and musical results. It uses threshold and reduction controls to catch breaths without requiring a complex setup. Many users find it faster than manual editing for long vocal comps.
Place it early in the vocal chain, before heavy compression or saturation. That way, the compressor is not reacting to breath peaks. If the plugin misses a soft exhale, combine it with light volume automation instead of increasing the reduction aggressively.
iZotope RX and Similar Restoration Suites
iZotope RX includes Breath Control, a module designed to detect and reduce breaths in dialogue and vocals. You can use RX as a standalone editor or integrate it with REAPER through RX Connect. It is especially useful for podcasts, audiobooks, and voiceover projects.
Restoration suites like RX offer precise visual feedback, which helps you remove only the unwanted breath energy. They can be heavier on CPU and may interrupt a fast creative flow. For music projects, a lighter plugin like DeBreath or DeBreather may be more practical.
Choosing the Right Plugin for Your REAPER Workflow
Consider the source first. A whispery indie vocal may need gentle reduction, while a punchy rap vocal can handle more aggressive debreathing. If you edit long interviews, automation and batch processing matter more than surgical control. If you mix music, transparency and speed are usually the priorities.
Demo any plugin before buying, and test it on real sessions rather than isolated breaths. Listen for artifacts, lisping, and unnatural gaps. The best reaper debreathing plugin is the one that saves you time while keeping the performance believable. With a thoughtful chain and a bit of manual cleanup, your vocals can stay expressive, clean, and ready for the mix.