DIY Raised Bed Netting: Build Your Own
Considering foraying into gardening but worried about pests? Raised bed netting is your answer. It's a DIY solution that provides excellent protection while letting ample sunlight and air reach your plants. Here, we delve into creating your own raised bed netting, ensuring your garden thrives in a pest-free haven.
Raising your beds has numerous benefits: better drainage, easier access, and less bending. But, without proper netting, you're inviting pests in. So, let's combine these two ideas and create a do-it-yourself (DIY) raised bed netting system.
Understanding Raised Bed Netting
Raised bed netting isn't just about blocking pests. It's also about protecting your plants from wind damage and bird dropping contamination. It's less about practicality, more about peace of mind. Let's explore the types and benefits.



There are two main types: fabric and hardware netting. Fabric, often made of synthetic materials like polypropylene, is lightweight, durable, and perfect for small raise beds. Hardware netting, usually made of galvanized steel, is heavier-duty and ideal for larger beds or orchards.
Fabric Raised Bed Netting
Fabric netting, cheaper and easier to install, suits most home gardeners. It provides UV protection, prevents airborne disease spores, and stops crawling critters. Plus, it's reusable and easy to clean.



Polypropylene, for instance, is a top choice. It's easy to clean, withstands sun and rain, and lasts for years. But, ensure it's not too fine, as it can obstruct airflow and heat.
Hardware Raised Bed Netting
Hardware netting, sturdier and more expensive, is ideal for larger-scale gardens or orchards. It's heavy-duty, rust-resistant, and durable. It can withstand high winds and heavy snow load. Plus, it lets in plenty of sunlight and air.
Galvanized steel is a popular choice for its strength and longevity. But, it's heavier and more complex to install. Nevertheless, it can last for decades with minimal maintenance.






DIY Raised Bed Netting: Step by Step
Ready to DIY? Here's a step-by-step guide to create your raised bed netting using fabric netting.
Materials: Fabric netting, staple gun, staples, scissors, and measuring tape.
Measure Your Bed
First, measure your raised bed's length, width, and height. You'll want your netting to fit snuggly, without overhanging and collecting debris.

For example, if your bed is 4' x 8' x 1', you'll need a netting that's at least 4' x 8' x 1'6". You'll need extra for overlaps and stretching.
Installing the Netting
Start at one corner of your raised bed. Pull the netting taut and staple it at the bottom, about an inch from the corner. Then, work your way up the side, keeping the netting taut and stapling every 4-6 inches.
When you reach the top, staple along the length, ensuring it's secure and flat. Then, repeat for the other sides. When done, pull all four corners taut and staple in place.
Caring for Your DIY Raised Bed Netting
With proper care, your netting can last for years. Here's how to maintain it:
- Clean it regularly to remove dirt and debris. Hose it down, let it dry, then store it away from direct sunlight.
- Avoid using harsh chemicals on it. If you must, wash it off thoroughly afterwards.
- In areas with high snow load, support the netting to avoid damage.
Repairing Your DIY Raised Bed Netting
Torn or damaged netting is easier to repair than replace. Here's how:
- If the damage is small, you can staple a patch over it.
- Large holes or tears might need to be stitched closed or patched with additional netting.
- Always ensure your repairs are secure and won't snag or tear further.
Embracing DIY raised bed netting not only protects your plants but also circumvents store-bought products, saves money, and boosts your gardening cred. So, grab your tools and create your personalized, pest-free garden sanctuary today!





