Master the ZIPPERED PILLOWCASE: Easy DIY Tutorial
Ever found yourself rummaging through your sheets for a wayward pillow at night? Say goodbye to those restless nights with a simple yet ingenious solution: a pillowcase with a convenient zipper. Not only does it keep your pillow secure, but it also allows for easy removal and washing. Here's a step-by-step tutorial to create your own pillowcase with zipper, easily and efficiently.
Before you start, gather your materials: fabric for the pillowcase, a coordinating zipper, matching thread, tailor's chalk, scissors, a sewing machine, and a pillow that fits the case you'll be making. In this tutorial, we'll be creating a standard pillowcase for a 20" x 26" pillow. Let's dive in!
Creating the Pillowcase Pieces
The first step is to create the pieces for your pillowcase. For this, you'll need two rectangles of fabric, each measuring 20" x 27". The extra inch allows for the width of the zipper and some seam allowance. Here's how to proceed:



Using tailor's chalk, mark the center point of one of the fabric pieces, which will be the top of your pillowcase. Measure and mark 10" down from the top on both sides. This will be where your zipper starts and ends. Next, measure 11" in from the sides and mark the top of the zipper tape, creating a small tab area.
Cutting the Zipper Tape
Measure your zipper tape, and cut it to match the length you've marked (20" in this case). If your zipper is longer, you can usually cut it down, but ensure you leave enough fabric at the bottom to handle easily and prevent fraying. Carefully cut the zipper tape to match the pillowcase size.



Once you've cut your zipper tape, set it aside. It's time to prepare the fabric pieces for sewing.
Preparing the Fabric Pieces
Take the chalk-marked fabric piece and, using pinking shears or a regular scissor, cut along the lines you've drawn earlier. This gives you two separate pieces: one with the zipper opening, and one without, which will be the back of your pillowcase.
Now that you have your pieces ready, it's time to start sewing. Breathe easy, as this is the longest part of the tutorial, but nothing complex is involved!






Sewing the Pillowcase
First, you'll hem the bottom of the pillowcase. Fold the raw edge of the back fabric piece up 1/2", and then fold it again, encasing the raw edge. Sew along the folded edge, leaving the top open.
Next, it's time to attach the zipper tape. Place the zipper tape right side up on the right side of the front fabric piece (the one with the zipper opening). Align the marking for the top of the zipper tape with the top edge of the fabric, and the edge of the zipper tape with the side you've marked for the zipper. Pin in place.
Attaching the Zipper Tape
Sew the edge of the zipper tape to the pillowcase, following the edge of the tape. When you reach the bottom of the tape, stop and pivot the fabric around the corner. Continue sewing along the next edge of the tape. This holds the tape in place and forms the zipper's pocket.

Next, fold the fabric above the zipper tape down towards the zipper, with right sides facing, and sew using a straight stitch along the edge of the tape.
Finishing the Zipper
Unzip your zipper partway to create an opening. Place the zipper pull on the inside of the case and pin the zipper tape in place with the edge of the tape even with the top of the pillowcase. Stitch across the top edge of the pillowcase, enclosing the zipper tape and securing the zipper pull in place.
Now, with the right side of the case out, attach the back piece to the front using a 1/2" seam allowance. Start at the top corner and pin and sew around the top and sides. Leave the bottom unstitched. Turn the case right side out and press. You're done!
You've now created your very own pillowcase with a zipper. This will keep your pillow secure and make washing a breeze. Happy sewing, and enjoy your new pillowcase!


