pickup cover struts

Don't Let Your Tonneau Flop: Top Pickup Cover Struts Reviewed

By Amanda Garcia
AD

Pickup cover struts are the hidden workhorses that make a tonneau cover or truck bed cover easy to open, hold up, and close. When they are working correctly, you hardly notice them. When they weaken, the cover suddenly becomes heavy, drops without warning, or refuses to stay in the raised position. That small change can turn a simple task into a frustrating wrestling match with your truck.

These gas-charged lift supports use pressurized nitrogen to counterbalance the weight of the cover. Because every pickup cover has a different weight, hinge design, and mounting angle, the correct strut must be matched to the application. Understanding how pickup cover struts work, why they fail, and how to replace them properly can save you time, money, and a few bruised knuckles.

How Pickup Cover Struts Work and When They Fail

A pickup cover strut is a sealed cylinder containing pressurized gas and a piston rod. When you lift the cover, the rod compresses the gas, creating force that assists the movement. At full extension, that force holds the cover open so you can reach into the bed without holding the cover with one hand. The strut also controls the closing motion, preventing the cover from slamming down.

AD
Custom Fit Vehicle Accessories
Custom Fit Vehicle Accessories
Replacing gas struts
Replacing gas struts
タイラックスとテレモーグルの画像|エキサイトブログ (blog)
タイラックスとテレモーグルの画像|エキサイトブログ (blog)

Most tonneau cover struts are designed for a specific force rating, usually measured in pounds or newtons. Too little force and the cover will not stay up. Too much force and the cover may be difficult to close, or the mounting brackets and hinges may be stressed beyond their design limits. The right strut balances effort, safety, and long-term durability.

The Mechanics Behind Tonneau Cover Lift Supports

Inside a typical lift support, nitrogen gas is separated from the hydraulic oil by a piston. The oil lubricates the seals and dampens movement, while the gas provides the lifting assist. The end fittings, often ball sockets or eyelets, connect the strut to the cover and the truck bed rail. A small amount of oil seepage around the rod seal is normal over time, but heavy leaking means the strut is losing its ability to do its job.

Ford Ranger 2023- Alpha SC-Z Sports Tonneau Cover in Various Colours
Ford Ranger 2023- Alpha SC-Z Sports Tonneau Cover in Various Colours
the back end of a white truck with stickers on it's flat bed
the back end of a white truck with stickers on it's flat bed
Improved Strut Brackets for Real Truck Undercover Tonneau Cover
Improved Strut Brackets for Real Truck Undercover Tonneau Cover

Temperature affects gas struts noticeably. In cold weather, the gas contracts and the strut feels weaker. In hot weather, pressure rises and the cover may pop up more forcefully. This is why a strut that works fine in summer can feel inadequate in winter. A quality replacement strut is often tested across a temperature range to provide more consistent performance.

Common Signs Your Pickup Cover Struts Are Failing

The most obvious sign is a cover that no longer stays open. If you lift it and it slowly sinks, or if it drops the moment you let go, the struts have likely lost pressure. Another sign is a cover that feels unusually heavy to lift, even when the struts are still attached. You may also hear a grinding or scraping sound as the piston rod moves, which can indicate internal wear or a bent rod.

AD

Visible damage is another clear indicator. Check for oil streaks on the cylinder, dents, rust, or a bent piston rod. Corrosion around the mounting points can weaken the connection and cause the strut to detach under load. If one strut fails, replace both at the same time. Uneven force can twist the cover and damage the hinges, leading to a much more expensive repair.

ad eBay | $51.89 | C1622632/823N Gas Shock Struts Spring Lift Support for Heavy 36 inch 185Lb | Sun
ad eBay | $51.89 | C1622632/823N Gas Shock Struts Spring Lift Support for Heavy 36 inch 185Lb | Sun
HELP!!! BakFlip G2 (or any folding cover) with bike rack? - Ford F150 Forum - Community of Ford Truck Fans
HELP!!! BakFlip G2 (or any folding cover) with bike rack? - Ford F150 Forum - Community of Ford Truck Fans
ACCESS Roll Up Tonneau Covers | Pickup Truck Bed Cover Lineup
ACCESS Roll Up Tonneau Covers | Pickup Truck Bed Cover Lineup
SO-4RUNR – Softopper – Truck Tops, SUV Tops, Accessories
SO-4RUNR – Softopper – Truck Tops, SUV Tops, Accessories
Secure Bed Covers Thacker Manufacturing, Inc.
Secure Bed Covers Thacker Manufacturing, Inc.

Choosing and Replacing Pickup Cover Struts

Replacing pickup cover struts is usually a straightforward job, but choosing the wrong parts can create new problems. You need to match the extended length, compressed length, stroke, force rating, and end fitting type. The mounting angle also matters because it affects how much force is required to lift and hold the cover. A strut that is too short may not open the cover far enough, while one that is too long can bind or prevent full closure.

Start by identifying your cover brand and model. Many tonneau cover manufacturers offer direct replacement struts or recommend specific aftermarket part numbers. If the original struts are still readable, look for a part number or force rating printed on the cylinder. When in doubt, measure the old strut carefully and compare it to the specifications of any potential replacement. Buying from a reputable supplier reduces the risk of getting a mislabeled or low-quality strut.

AD

Matching Force, Length, and Mounting Style

Force rating is the most important specification to get right. A common mistake is choosing a strut with more force than the original, thinking it will hold the cover better. In reality, excess force can make the cover difficult to close, strain the mounting brackets, and even bend the cover frame. If you have added accessories such as a rack or cargo carrier to the cover, you may need a slightly higher force rating, but only after confirming the cover and hinges can handle it.

Length and mounting style are equally critical. Measure the distance between the ball studs or mounting points when the cover is fully open and fully closed. The difference is the stroke. The end fittings must match the existing hardware or include adapters that fit securely. Common fittings include 10mm ball sockets, 13mm ball sockets, eyelets, and threaded studs. A strut with the correct force but the wrong fitting will not install properly, and forcing it can damage the cover or bed rail.

Installation, Maintenance, and Safety Tips

Before installation, support the cover in the open position with a prop rod or a helper. Never rely on the old struts to hold it while you work. Remove the old struts one at a time, noting the orientation and mounting points. Clean the ball studs and brackets, then apply a small amount of silicone grease to the pivots. Install the new struts with the cylinder end up or down according to the manufacturer's instructions, because orientation can affect sealing and performance.

AD

Once installed, test the cover through several open and close cycles. It should lift smoothly, stay open without drifting, and close without excessive force. Check the mounting bolts after the first few uses, since they can loosen as the struts settle. For long-term maintenance, keep the piston rods clean and free of grit, and avoid spraying them with harsh solvents. A little care can extend the life of your pickup cover struts and keep your truck bed cover operating like new.

If your cover feels heavy, drops unexpectedly, or shows signs of rust and oil leakage, new pickup cover struts are one of the most affordable upgrades you can make. Take a few minutes to inspect the current hardware, confirm the correct specifications, and install a fresh pair. Your truck bed will be easier to access, your cover will last longer, and every trip will feel a little more effortless.

AD