pencil catapult

Pencil Catapult: Easy DIY STEM Project for Kids

By Nicole Garcia
AD

A pencil catapult is one of those rare projects that turns an ordinary school supply into a hands-on physics demonstration. With a few pencils, rubber bands, and a plastic spoon, you can build a miniature launcher that flings erasers, pom-poms, or paper balls across a table.

The appeal goes beyond classroom fun. A pencil catapult teaches energy storage, leverage, trajectory, and iterative design without expensive kits. This guide explains how it works, how to build one, and how to test and improve it safely.

What Is a Pencil Catapult and How Does It Work?

A pencil catapult is a small lever-based launcher constructed primarily from pencils. The pencils form a rigid frame, a fulcrum, and a throwing arm. Rubber bands provide the power by stretching and releasing, while a spoon, bottle cap, or binder clip serves as the projectile cup.

AD
the back to school stem activity is made out of pencils and plastic tubes, with text overlay reading 2 pencil catapult back - to - to - school stem
the back to school stem activity is made out of pencils and plastic tubes, with text overlay reading 2 pencil catapult back - to - to - school stem
a white spoon sitting on top of a wooden triangle shaped structure with yellow sticks sticking out of it
a white spoon sitting on top of a wooden triangle shaped structure with yellow sticks sticking out of it
Candy Corn Catapults! {Fall STEM Challenge} - Frugal Fun For Boys and Girls
Candy Corn Catapults! {Fall STEM Challenge} - Frugal Fun For Boys and Girls

Because the materials are lightweight and familiar, the device is easy to modify. You can change the number of rubber bands, the fulcrum height, the length of the throwing arm, and the mass of the projectile. Each adjustment creates a new experiment in force, motion, and accuracy.

The Physics Behind a Pencil Catapult

When you pull back the throwing arm, the rubber bands stretch and store elastic potential energy. Release the arm, and that stored energy converts into kinetic energy, rotating the lever around its fulcrum. The longer the arm beyond the fulcrum, the faster the tip moves, though the trade-off is often reduced force.

How To Make A Pencil Catapult - Little Bins for Little Hands
How To Make A Pencil Catapult - Little Bins for Little Hands
a hand is placing toothbrushes in the shape of a triangle on top of a table
a hand is placing toothbrushes in the shape of a triangle on top of a table
DIY Catapult Reading Game with Cardboard Sight Word Board!
DIY Catapult Reading Game with Cardboard Sight Word Board!

Once the projectile leaves the cup, it becomes a projectile governed by initial velocity, launch angle, gravity, and air resistance. A 45-degree angle often produces maximum range in ideal conditions, but a pencil catapult may perform best at a lower or higher angle depending on release height, arm speed, and projectile shape.

Why Pencil Catapults Are Popular STEM Projects

Pencil catapults are popular because they are inexpensive, quick to assemble, and safe when used with soft ammunition. Teachers use them to introduce the engineering design process: define a problem, brainstorm solutions, build a prototype, test it, and improve it.

AD

They also fit neatly into science fair investigations. Students can measure launch distance, compare rubber band configurations, test different projectiles, or calculate average speed. The project scales from a 20-minute craft to a multi-day inquiry with graphs and conclusions.

Kid Craft of the Week: Pencil Catapult
Kid Craft of the Week: Pencil Catapult
Search Results for “label/History Lessons”
Search Results for “label/History Lessons”
an image of a catapult made out of pencils and plastic spoons
an image of a catapult made out of pencils and plastic spoons
18 Ways To Make Your Desk More Delightful
18 Ways To Make Your Desk More Delightful
a wooden stick man with a yellow hat and blue string around his neck is standing in front of several other sticks
a wooden stick man with a yellow hat and blue string around his neck is standing in front of several other sticks
a hand holding a red and yellow toy airplane on top of a wooden table
a hand holding a red and yellow toy airplane on top of a wooden table

How to Build and Test a Pencil Catapult

To make a basic pencil catapult, gather six to eight pencils, four to six rubber bands, a plastic spoon or bottle cap, tape, and a handful of soft projectiles. A ruler, protractor, and notebook will help you test consistently. If you use hot glue, keep it away from rubber bands and ask an adult for help.

Start with a stable base. Arrange two pencils parallel as rails, then connect them with two cross pencils to form a rectangle or triangle. Wrap rubber bands tightly around each corner. A stable base prevents the catapult from tipping and stealing energy from the launch.

AD

Step-by-Step Assembly Instructions

Build the fulcrum next. Stack two or three pencils across the base and secure them with rubber bands. These stacked pencils create a raised pivot point. Place a single pencil or craft stick across the stack as the throwing arm, then bind it loosely enough that it can rotate but not wobble side to side.

\
\
Popsicle Stick School Project School Project Popsicle Stick Catapult, Simple Catapult Designs For School Projects, School Project School Project Popsicle Stick Catapult, Easy Catapult Designs For School Projects, Catapult Design Ideas For School Project, Lever Project, School Project Catapult Designs For School Projects, Catapult Design, How To Build A Catapult For School Project
Popsicle Stick School Project School Project Popsicle Stick Catapult, Simple Catapult Designs For School Projects, School Project School Project Popsicle Stick Catapult, Easy Catapult Designs For School Projects, Catapult Design Ideas For School Project, Lever Project, School Project Catapult Designs For School Projects, Catapult Design, How To Build A Catapult For School Project
Pencil Catapult
Pencil Catapult
How to Make a Simple Popsicle Stick Catapult (3 Catapult Designs)
How to Make a Simple Popsicle Stick Catapult (3 Catapult Designs)

Attach a plastic spoon or bottle cap to one end of the throwing arm with tape or a rubber band. This is the projectile cup. Last, loop one or more rubber bands around the base and over the throwing arm near the cup. Pull the arm back gently, load a soft projectile, and release. Adjust tension and fulcrum height until the launch feels controlled.

Optimizing Launches, Experiments, and Safety

For greater distance, try lighter projectiles, a longer throwing arm beyond the fulcrum, and moderate rubber band tension. More rubber bands are not always better; overstretching can slow the release, stress the frame, or snap the bands. For accuracy, repeat launches from the same spot and use a consistent pull-back point. Mark the ideal band stretch with tape, record launch angles with a protractor, and change only one variable at a time so you know what actually improved performance.

AD

Safety matters as much as power. Never aim a pencil catapult at people, pets, or fragile objects. Use only soft, lightweight projectiles such as pom-poms, paper balls, or foam pieces. Inspect rubber bands before each session and replace any that are cracked, brittle, or overstretched. Keep the catapult on a stable surface, do not lean over the throwing arm while it is loaded, and follow classroom rules during group testing.

A pencil catapult is a compact lesson in engineering: humble materials, clear constraints, and endless room to iterate. Build one, measure your launches, and invite a friend or classmate to compete for distance or accuracy. The best version is not the one with the most rubber bands; it is the one you understand, refine, and use to ask a better question.

AD