Optimize Your Ride: Master Ohlins MTB Settings
Optimizing your Mountain Bike (MTB) with Öhlins suspension requires careful tuning to match your riding style and terrain. With the right setup, you can improve handling, traction, and overall performance. Let's dive into the world of Öhlins MTB settings.
First, understand that every rider is unique, and so is their bike. The ideal suspension setup depends on factors like your weight, riding style, local terrain, and even your personal preference. Thus, it's essential to find the perfect balance for your specific conditions.
The Basics of Öhlins MTB Suspension
Öhlins MTB suspension is renowned for its exceptional performance and adjustability. The rear shock andfork are equipped with various adjustment features, enabling you to fine-tune rebound, compression, and even the air spring curve.



Before delving into specific adjustments, ensure your bike is set up correctly - the sag (the amount the suspension compresses under load) should be around 25-35% for the rear and 20-30% for the fork. This is a starting point and may vary depending on your preferences and the terrain you typically ride.
Rebound Settings
Rebound controls how quickly the suspension returns to its original position after absorbing a bump. Faster rebound is suited to smooth trails, improving small-bump sensitivity, while slower rebound is ideal for rough, technical terrain, providing better control and traction.



Start with the rebound in the middle of its adjustment range, then fine-tune based on your riding style and terrain. Typically, a faster rebound setting is better for climbing and flatter trails, while a slower setting is suitable for steep, technical descents. Always remember, rebound is a crucial aspect of suspension tuning, greatly affecting ride feel and performance.
Compression Settings
Compression determines how easily the suspension is compressed. In Öhlins MTBs, both low-speed and high-speed compression can be adjusted. Low-speed compression affects traction and support, while high-speed compression is crucial for handling big hits and maintaining traction at high speeds.
Unlike rebound, most riders prefer to start with stiffer compression settings to maintain support and prevent wallowing. Then, gradually soften the settings based on your weight, riding style, and the terrain. Again, this is a personal preference, so don't be afraid to experiment until you find your ideal setup.





Advanced Öhlins MTB Tuning
Once you're comfortable with rebound and compression settings, delve into the more advanced features of Öhlins MTB suspension. This includes air spring tuning, platform valves, and even adjusting the lever ratio.
Air spring tuning allows you to customize the feel of the air spring curve. Using the Climb switch or changing the IFP (Internal Floating Piston) volume, you can adjust the bike's progression and support. For example, running a more progressive spring curve can provide better support on smoother trails, improving pedaling efficiency.
Platform Valves
Platform valves control the initial part of the travel, preventing the suspension from diving too deep under pedaling forces or small impacts. This keeps the tire in contact with the ground, improving traction and pedaling efficiency. Adjusting the platform valve can help fine-tune the bike's responsiveness and support.
The boost valve is a similar feature that provides additional support at the start of the travel, helpful for preventing bottom-outs on steep descents or when/seating drops. Both platform valves and boost valves can significantly impact the bike's ride feel and performance, so consider adjusting these as part of your suspension tuning.
Lever Ratio
The lever ratio determines how much the rear wheel moves relative to the amount the rear shock compresses. A higher lever ratio (e.g., 2:1) makes the bike feel more sluggish but provides excellent traction, while a lower lever ratio (e.g., 1:1) makes the bike feel more responsive but reduces traction.
Adjusting the lever ratio can have significant implications for a bike's handling and suspension performance. However, it's an advanced adjustment typically reserved for professional mechanics or riders looking to optimize their bike's performance for specific events or disciplines.
Finding your perfect Öhlins MTB settings is a journey that may take time and numerous adjustments. Don't be discouraged if you don't get it right on your first attempt. Keep riding, keep experimenting, and you'll eventually find a setup that works best for you. Happy wrenching, and enjoy the improved performance and confidence that comes with a perfectly tuned Öhlins MTB suspension.





