no light on ring chime when plugged in

No Power to Ring Chime: Troubleshooting No Light Issues When Plugged In

By Sarah Clark
AD

Are you experiencing a puzzling issue with your Ring Chime? You've plugged it in, but there's no light illuminating from it? Don't worry, you're not alone. Let's troubleshoot this common problem and get your Ring Chime up and running again.

Before we dive into potential solutions, let's briefly understand the role of the light on your Ring Chime. It's your primary visual indicator, flashing when you have a visitor, or to signal charging status. So, when there's no light, it's tough to figure out what's happening. Let's fix that.

Checking Basic Setup

First, let's ensure the basics are in place. Your Ring Chime needs power to function, so check your outlet and ensure it's working. You can test it using another device. If the outlet is faulty, try using a different one.

AD
Ring Plug In Chime for Ring Devices in White
Ring Plug In Chime for Ring Devices in White
Ring Chime Not Working/Flashing Red/Humming/Buzzing - Ready To DIY
Ring Chime Not Working/Flashing Red/Humming/Buzzing - Ready To DIY
an electronic device plugged in to a wall charger on a white tiled wall
an electronic device plugged in to a wall charger on a white tiled wall

Next, check if the light on your Ring Chime is blinking during the setup process. If not, you might need to factory reset your device and try the setup again.

Inadequate Power Supply

A common culprit for no light on Ring Chime is insufficient power supply. Although uncommon, some USB outlets or power banks might not provide enough power. Try plugging your Ring Chime directly into a power outlet or use a USB charger with higher output.

a remote control sitting on top of a wooden table next to a wall mounted device
a remote control sitting on top of a wooden table next to a wall mounted device
an electronic device is mounted on the wall
an electronic device is mounted on the wall
🔔🏠 Ring Chime – Du hörst jede Benachrichtigung sofort
🔔🏠 Ring Chime – Du hörst jede Benachrichtigung sofort

If you're using an extension cord or power strip, make sure it's not damaged and can provide enough power. Also, ensure that the cable connecting your Ring Chime to the outlet is in good condition and not damaged.

Faulty Chime Unit

Unfortunately, the light on your Ring Chime could be faulty. To confirm this, try using a different power source, such as a USB charger or plugging it into a different outlet. If the light still doesn't turn on, the unit itself might be damaged.

AD

In this case, it's recommended to reach out to Ring's customer support or check your warranty. They can guide you further or replace the faulty unit if applicable.

All-new Ring Chime, white
All-new Ring Chime, white
Never Miss a Visitor Again 🚪🔔 | Ring Chime (Newest Model) Easy Plug-In WiFi Alert
Never Miss a Visitor Again 🚪🔔 | Ring Chime (Newest Model) Easy Plug-In WiFi Alert
Ring Chime
Ring Chime
a person is holding up their cell phone to check out the security settings on it
a person is holding up their cell phone to check out the security settings on it
Alternative Verdrahtungseinrichtung fĂĽr Elvox ART 900-902 | Ring-Community
Alternative Verdrahtungseinrichtung fĂĽr Elvox ART 900-902 | Ring-Community
Will a Ring Doorbell Work with Your Existing Chime? (Don’t Install Until You Read This!)
Will a Ring Doorbell Work with Your Existing Chime? (Don’t Install Until You Read This!)

Performance under Extreme Temperatures

Extreme temperatures can affect the performance of electronic devices, including Ring Chime. If your device is located in an area with extreme heat or cold, it might be causing the issue.

To verify if temperature is the culprit, try relocating your Ring Chime to a cooler or warmer area. If the light turns on and starts working normally, then the temperature might be the cause. In such cases, consider installing your device in a location with suitable temperature conditions.

AD

Ring App and Firmware Updates

Outdated firmware or bugs in the Ring app can sometimes cause issues with your Ring Chime, including no light on the device. Ensure your Ring app is updated to the latest version and your device's firmware is up-to-date.

🔔✨ Ring Chime Pro (2. Generation) – Dein smarter Türgong für Ring Geräte
🔔✨ Ring Chime Pro (2. Generation) – Dein smarter Türgong für Ring Geräte

You can update your Ring Chime's firmware through the Ring app. Open the app, go to 'Devices,' select your Ring Chime, tap on 'Device Settings,' and then 'Firmware Update.' If an update is available, follow the on-screen instructions to update your device.

If none of the above solutions work, it might be time to contact Ring's customer support. They can provide further assistance based on your device's specific issue. Don't let this minor hiccup stop you from enjoying the convenience of a Ring Chime. Happy troubleshooting, and here's to a well-lit, connected home!

AD
AD