NFL Pen Blanks: Turn Your Team Pride Into Custom Pens
NFL pen blanks are specialty pen turning blanks that bring team spirit to the lathe. They usually feature NFL team colors, logos, helmet designs, or field-inspired patterns, giving woodturners a ready-made way to create fan gifts, craft-fair inventory, and custom keepsakes. Instead of starting with a plain acrylic or wood blank, you begin with a material that already carries the visual identity of a favorite franchise.
For hobbyists and small-shop turners, NFL pen blanks sit at the intersection of craftsmanship and fandom. The best ones are not just colorful tubes of resin or wood; they are carefully designed, drilled, tubed, and turned into slimlines, cigar pens, bolt-action kits, and other popular pen styles. Understanding the materials, hardware choices, and finishing methods will help you get clean results instead of cracked blanks or blurred logos.
What Are NFL Pen Blanks?
An NFL pen blank is a cylindrical piece of turning material, typically around 3/4 inch square and 5 inches long, that is intended to be drilled, glued to a brass tube, mounted on a lathe, and turned down to match a pen kit’s bushings. The NFL connection comes from the blank’s design: team colors, printed logos, embedded decals, laser-cut inlays, or resin-cast graphics that celebrate a specific franchise. Some blanks are officially licensed, while others are team-inspired creations made by independent casters and blank makers.
It is important to remember that the blank is only one part of the project. You still need a compatible pen kit, bushings, drill bit, barrel trimmer, sandpaper, polish, and assembly tools. The blank determines the look, but the kit determines the pen’s size, weight, mechanism, and plating. A great NFL pen blank paired with the wrong kit can feel awkward, while a simple kit paired with a well-made team blank can become a standout piece.
Types of NFL Team Pen Blanks
The most common type is acrylic or resin. These blanks often use team-colored swirls, embedded shreds, printed labels, or cast vinyl logos. Resin blanks polish to a high gloss, resist moisture, and show off vivid colors. They are popular for laser-printed team logos because the graphic can be sealed under a clear resin layer, protecting it during turning and handling. Hybrid blanks, which combine wood and resin, are another option for turners who want natural grain alongside team colors.
Wood NFL pen blanks are also available, especially for fans who prefer a traditional look. Some makers laser-engrave team logos into maple, cherry, or walnut, then fill the engraving with colored epoxy or inlay powder. Others create segmented blanks by gluing contrasting wood strips in team colors. For example, a green-and-gold segmented blank can suggest the Green Bay Packers, while black-and-gold segmenting can evoke the Pittsburgh Steelers. Always check whether a design is officially licensed if you plan to sell finished pens.
Choosing the Right Pen Kit and Hardware
Pen kit selection affects both style and durability. Slimline kits are affordable and lightweight, making them good for high-volume gifts, but they offer less surface area for large logos. Cigar, Sierra, bolt-action, and executive kits provide more blank material, which can display team graphics more boldly. Bolt-action pens are especially popular for football fans because the mechanism feels rugged and masculine, while chrome, gunmetal, and black titanium platings pair well with most team colors.
Match the blank’s color palette to the hardware finish. A silver-and-blue Dallas Cowboys-inspired blank often looks sharp with chrome or satin nickel. A black-and-orange Cincinnati Bengals-inspired blank can look excellent with black titanium or gunmetal. If the blank is mostly dark, a bright gold or chrome kit adds contrast. If the blank is busy with multiple colors, a simple silver or black kit keeps the focus on the team design rather than competing with it.
Turning and Finishing NFL Pen Blanks
Turning NFL pen blanks requires the same fundamentals as any pen project, but the stakes are higher because a mistake can ruin the team logo or cause a blowout. Start by cutting the blank slightly longer than the brass tube, then drill a straight hole using a sharp bit and slow speed. Roughen the tube, apply epoxy or thick CA glue, and insert it with a twisting motion. Once the glue cures, square the ends carefully with a barrel trimmer or sanding jig so the tubes sit flush.
Mount the blank on the lathe with the correct bushings and tighten the tailstock just enough to hold it without compressing the material. Resin blanks tend to chip if you take aggressive cuts, so use sharp tools, a slow lathe speed, and light passes. Wood blanks can be turned faster, but figured or segmented blanks still need patience. Stop frequently to check the profile against the bushings, especially near the ends where blowouts are most likely.
Step-by-Step Turning Tips for Logo Blanks
First, paint the brass tubes and the inside of the drilled hole if the blank is translucent. A white or matching-color paint layer prevents the tube from showing through and keeps team colors vibrant. Second, use epoxy for tubes rather than thin CA when possible; epoxy gives you more working time and reduces the chance of glue seeping into the logo area. Third, keep your tool rest close to the work and sharpen often, because dull tools create heat, tear-out, and cloudy resin.
After turning, sand progressively through the grits. For acrylic and resin NFL pen blanks, wet sanding from 400 to 12000 micro-mesh followed by plastic polish produces a glass-like finish. For wood team blanks, sand to 400 or 600, apply a CA finish or a durable friction polish, then buff. When assembling, press the transmission and finial squarely, and avoid over-pressing the tip. A small amount of paste wax on the assembled barrel can reduce handling marks before the pen is packaged.
Common Mistakes and How to Avoid Them
One common mistake is drilling too fast or using a dull bit, which overheats resin and causes cracks. Another is failing to support the blank when drilling, leading to an off-center hole and thin walls. Logo distortion happens when turners remove too much material or turn past the design layer. Cloudy acrylic usually comes from skipping sanding grits or using too much pressure, which generates heat and leaves micro-scratches. Glue seepage can also ruin a printed label if the tube is inserted with excess adhesive.
To avoid these issues, drill on the lathe or with a drill press and a centering vise. Use sharp bits, back the blank with a sacrificial block, and clear chips often. For logo blanks, measure the design depth and stop turning before you reach it. Sand with light pressure and clean the blank between grits. If you sell finished pens, confirm that your blank source provides licensed or permission-friendly designs, because trademark rules matter in commercial craft sales. A little caution protects both your reputation and your profit margin.
With a reliable source of NFL pen blanks and a few practice runs, you can turn team pride into a polished, useful gift that fans actually keep on their desks. Try one kit and one team color first, note the drilling and finishing steps that worked best, then scale up for holidays, fantasy football prizes, or your next craft show. The right blank, sharp tools, and a patient finish will make every pen feel like a piece of game-day tradition.