MTD Track Snowblower: Best Models, Reviews, and Buying Guide
When winter storms bury your driveway under heavy, wet snow, a standard wheeled snow blower can quickly lose its footing. That is where an MTD track snowblower earns its keep. Instead of relying on tires that spin and slide, a track-drive machine uses rubber tracks to grip the ground, pull itself up slopes, and keep moving through drifts that would stop lighter equipment.
MTD is the parent company behind familiar outdoor power brands such as Troy-Bilt, Cub Cadet, Craftsman, and Yard Machines, so the phrase MTD track snowblower generally refers to track-drive models built within that family. These machines are designed for homeowners who face long driveways, steep grades, gravel surfaces, or repeated lake-effect snow. This guide explains how they perform, what features matter, and how to keep one running season after season.
Why an MTD Track Snowblower Excels in Tough Winter Conditions
An MTD track snowblower is not just a wheeled machine with a different undercarriage. The track system changes how the snow blower transfers power to the ground. Instead of two or four tires, it uses a pair of continuous rubber tracks that spread the machine's weight over a larger contact area. That lower ground pressure improves traction on ice, packed snow, and loose gravel, while also helping the machine climb grades that would cause a wheeled unit to spin out.
Track-drive snow blowers from MTD brands also tend to be heavier and more robust than entry-level wheeled models. That weight is an advantage when the auger bites into a snowbank, because the machine resists bouncing and stays planted. The trade-off is that tracks can make steering less nimble on bare pavement, and transport speeds are usually slower. For many owners, though, the improved stability in serious winter conditions is worth the compromise.
Traction and Stability on Slopes and Gravel
Traction is the headline benefit of an MTD track snowblower. Rubber tracks maintain a wider footprint than tires, so they are less likely to dig into soft ground or spin on icy inclines. On a sloped driveway, the tracks pull the machine forward with steady, predictable grip, reducing the need to push or wrestle with the handles. Some models add trigger-controlled power steering, which lets you disengage one track briefly to pivot the machine without fighting the entire weight of the unit.
Gravel driveways are another area where tracks shine. A wheeled snow blower can sink into loose stone or push gravel into the auger housing, creating a mess and potential damage. Tracks tend to ride higher on the surface, and their larger contact area distributes weight more gently. That does not mean you can ignore skid shoes or auger housing height, but an MTD track snowblower generally handles uneven, unpaved surfaces with far less drama than a comparable wheeled model.
Clearing Performance and Snow Handling
Most MTD track snowblower models are two-stage or three-stage machines. Two-stage models use a serrated auger to gather snow and a high-speed impeller to throw it out the chute. Three-stage models add an accelerator that chops and moves slushy, heavy snow more efficiently, which is especially useful in areas where the plow leaves a dense wall of frozen debris at the end of the driveway. Clearing widths commonly range from about 26 to 34 inches, with intake heights around 21 to 23 inches, so they can handle substantial accumulations in fewer passes.
Snow handling also depends on chute control, skid shoes, and drift cutters. A remote crank or joystick-style chute control lets you adjust the discharge direction without stopping, while robust skid shoes protect the auger housing on gravel and uneven pavement. Drift cutters help the machine pull down tall snowbanks that would otherwise spill over the top. When paired with a powerful engine and a well-designed impeller, an MTD track snowblower can throw snow far enough to keep driveways, walkways, and mailbox areas clear.
Buying, Operating, and Maintaining an MTD Track Snowblower
Buying an MTD track snowblower requires thinking beyond horsepower. The right choice depends on your driveway's length, slope, surface material, and typical snowfall. A track-drive machine is heavier and more expensive than a wheeled equivalent, so it makes the most sense when traction and clearing capacity are genuine priorities. If your driveway is flat, paved, and short, a wheeled model may be easier to maneuver and store. If you battle drifts, inclines, or gravel, the track system can quickly justify its cost.
Operation is also different from a wheeled snow blower. Tracks require smooth, deliberate inputs, and you should let the machine work at its own pace rather than forcing it into a snowbank. Before each season, check track tension, inspect belts and shear pins, and confirm that the chute and auger move freely. During use, keep the engine speed high enough to clear the housing, and never reach into the auger or chute with your hands—use a clean-out tool if a clog forms.
Key Features to Compare Before You Buy
Start with the engine and drive system. Displacement, measured in cubic centimeters, gives a rough idea of power, but torque and transmission design matter just as much. Look for an electric start for cold mornings, heated hand grips for comfort, and LED headlights for low-light clearing. Track width and length affect flotation and stability, while power steering and trigger controls determine how easy the machine is to turn. A three-stage design can be worth the extra cost if you regularly face wet, heavy snow or plow banks.
Brand and support also deserve attention. Troy-Bilt and Cub Cadet are the most common MTD track snowblower names, and each has its own model tiers, warranty terms, and dealer networks. Cub Cadet models often emphasize heavy-duty features and commercial-inspired controls, while Troy-Bilt tends to focus on homeowner-friendly value. Craftsman and Yard Machines may offer related machines depending on the year and region. Compare local parts availability, service options, and reviews from owners who have similar driveways before you decide.
Maintenance Tips for Long-Term Reliability
Routine maintenance is what keeps an MTD track snowblower dependable. Change the engine oil according to the manual, check the spark plug, and clean or replace the air filter. Use fresh fuel with a stabilizer, and drain the carburetor or run the engine dry before off-season storage. Lubricate grease fittings, inspect the auger gearbox, and adjust the track tension so the tracks do not slip or wear unevenly. Replace worn shear pins, belts, and skid shoes before they fail in the middle of a storm.
At the end of winter, give the machine a thorough cleaning and inspection. Remove salt, grit, and compacted snow from the housing, auger, and tracks. Check the rubber tracks for cracks, missing cleats, or stretching, and replace them as a set if wear is significant. Store the snow blower on a level surface in a dry area, preferably covered, with the fuel system treated and the spark plug removed or fogged according to the manufacturer's instructions. A little off-season attention makes the next first snowfall far less stressful.
Before the first storm arrives, take time to match a track-drive MTD snow blower to your driveway's real demands, not just the biggest numbers on a spec sheet. The right machine should feel stable on your slopes, manageable at your gates and turns, and powerful enough for the snow your area actually receives. With proper setup, sensible operation, and a simple maintenance routine, an MTD track snowblower can turn the worst winter morning into a predictable, even satisfying, job.